?? lcd.c
字號:
k++ ;
}
Uart_Printf("color mode test 0. Press any key!\n");
Uart_Getch();
j=0;
for(i=0;i<320;i+=80)
Glib_FilledRectangle(0+i,0,79+i,239,j+=60);
Uart_Printf("color mode test 1. Press any key!\n");
Uart_Getch();
Glib_ClearScr(0);
j=0;
for(i=0;i<320;i+=80)
{
Glib_FilledRectangle(0+i,0,79+i,119,j);
Glib_FilledRectangle(0+i,120,79+i,239,255-j);
j+=60;
}
Uart_Printf("color mode mode test 2. Press any key!\n");
Uart_Getch();
Glib_ClearScr(0);
j=0;
for(i=0;i<240;i+=60)
{
Glib_FilledRectangle(j,i,j+79,i+59,k);
j+= 80;
k+=0x40;
}
Uart_Printf("color mode mode test 3. Press any key!\n");
Uart_Getch();
Glib_ClearScr(0);
k=0;
for(i=160;i<480;i+=80)
{
for(j=120;j<360;j+=60)
{
Glib_FilledRectangle(i,j,i+79,j+59,k%4);
k++;
}
k+=2;;
}
Uart_Printf("color mode mode test 4. Press any key!\n");
Uart_Printf("Virtual Screen Test(256 color). Press any key[ijkm\\r]!\n");
MoveViewPort(MODE_COLOR);
Lcd_MoveViewPort(0,0,MODE_COLOR);
}
void LcdColor256_Bmp( unsigned char bmp[] )
{
int i,j,k;
rPDATE=rPDATE&~(1<<5)|(1<<5); //GPE5=H
rPCONE=rPCONE&~(3<<10)|(1<<10); //GPE5=output
rPCONC=rPCONC&~(0xff<<8)|(0xff<<8); //GPC[4:7] => VD[7:4]
Lcd_Init(MODE_COLOR);
Glib_Init(MODE_COLOR);
k = 0 ;
for(i=0;i<240;i++)
{
for(j=0;j<320;j++)
{
PutPixel( j, i, High_Low( bmp[k] ) );
k++;
}
}
}
void MoveViewPort(int depth)
{
int vx=0,vy=0,vd;
vd=(depth==1)*16+(depth==4)*8+(depth==16)*4+(depth==256)*2;
while(1)
{
switch(Uart_Getch())
{
case 'i':
if(vy>=vd)vy-=vd;
break;
case 'j':
if(vx>=vd)vx-=vd;
break;
case 'k':
if(vx<=SCR_XSIZE-LCD_XSIZE-vd)vx+=vd;
break;
case 'm':
if(vy<=(SCR_YSIZE-LCD_YSIZE-vd))vy+=vd;
break;
case '\r':
return;
default:
break;
}
Uart_Printf("vx=%3d,vy=%3d\n",vx,vy);
Lcd_MoveViewPort(vx,vy,depth);
}
}
/************************ for only test **********************/
#define BUFFER0_PREPARED (0)
#define BUFFER1_PREPARED (1)
#define BUFFER0_USED (2)
#define BUFFER1_USED (3)
#define M5D(n) ((n) & 0x1fffff)
#define MVAL (13)
unsigned int (*frameBuffer256_2)[SCR_XSIZE/4];
void MoveViewPort2(int depth)
{
int vx=0,vy=0,vd;
U32 addr;
char key;
int state=BUFFER0_USED;
vd=(depth==1)*16+(depth==4)*8+(depth==16)*4+(depth==256)*2;
while(1)
{
while(1)
{
key=Uart_GetKey();
if(key!=0)break;
if(state==BUFFER1_USED)
{//set the frame buffer as BUFFER1
state=BUFFER0_PREPARED;
while((rLCDCON1>>22)==0); // if x>64
addr=(U32)frameBuffer256+(vx/1)+vy*(SCR_XSIZE/1);
rLCDSADDR1= (0x3<<27) | ( (addr>>22)<<21 ) | M5D(addr>>1);
// 256-color, LCDBANK, LCDBASEU
rLCDSADDR2= M5D(((addr+(SCR_XSIZE*LCD_YSIZE))>>1)) | (MVAL<<21);
}
if(state==BUFFER0_USED)
{//set the frame buffer as BUFFER0
state=BUFFER1_PREPARED;
while((rLCDCON1>>22)==0); // if x>64
addr=(U32)frameBuffer256_2+(vx/1)+vy*(SCR_XSIZE/1);
rLCDSADDR1= (0x3<<27) | ( (addr>>22)<<21 ) | M5D(addr>>1);
// 256-color, LCDBANK, LCDBASEU
rLCDSADDR2= M5D(((addr+(SCR_XSIZE*LCD_YSIZE))>>1)) | (MVAL<<21);
}
if((rLCDCON1>>22)==0)
{
if(state==BUFFER0_PREPARED)state=BUFFER0_USED;
if(state==BUFFER1_PREPARED)state=BUFFER1_USED;
}
}
switch(key)
{
case 'i':
if(vy>=vd)vy-=vd;
break;
case 'j':
if(vx>=vd)vx-=vd;
break;
case 'k':
if(vx<=SCR_XSIZE-LCD_XSIZE-vd)vx+=vd;
break;
case 'm':
if(vy<=(SCR_YSIZE-LCD_YSIZE-vd))vy+=vd;
break;
case '\r':
return;
default:
break;
}
Uart_Printf("vx=%3d,vy=%3d\n",vx,vy);
Lcd_MoveViewPort(vx,vy,depth);
}
}
void Test_LcdColor2(void)
{
int i,j,k;
rPDATE=rPDATE&~(1<<5)|(1<<5); //GPE5=H
rPCONE=rPCONE&~(3<<10)|(1<<10); //GPE5=output
rPCONC=rPCONC&~(0xff<<8)|(0xff<<8); //GPC[4:7] => VD[7:4]
Uart_Printf("[(240x3)x320 Color STN Virtual Screen & 2 Frame Buffers Test]\n");
Lcd_Init(MODE_COLOR);
frameBuffer256_2=(unsigned int (*)[SCR_XSIZE/4])malloc(SCR_XSIZE/1*SCR_YSIZE);
if((U32)frameBuffer256==0x0)return;
if((U32)frameBuffer256_2==0x0)return;
Glib_Init(MODE_COLOR);
Glib_ClearScr(0);
Glib_ClearScr(0);
k=0;
for(i=160;i<480;i+=20)
{
for(j=120;j<360;j+=15)
{
Glib_FilledRectangle(i,j,i+19,j+14,k);
k++;
}
}
// #0
// 00
Glib_Rectangle(0,0,319,239,255);
Glib_Line(0,0,319,239,255);
Glib_Line(0,239,319,0,255);
// 0#
// 00
Glib_Rectangle(0+320,0,319+320,239,255);
Glib_Line(0+320,0,319+320,239,255);
Glib_Line(0+320,239,319+320,0,255);
// 00
// #0
Glib_Rectangle(0,0+240,319,239+240,255);
Glib_Line(0,0+240,319,239+240,255);
Glib_Line(0,239+240,319,0+240,255);
// 00
// 0#
Glib_Rectangle(0+320,0+240,319+320,239+240,255);
Glib_Line(0+320,0+240,319+320,239+240,255);
Glib_Line(0+320,239+240,319+320,0+240,255);
Glib_Rectangle(50+320,50+240,269+320,189+240,255);
for(i=0;i<720/4;i++)
for(j=0;j<960;j++)
{
frameBuffer256_2[j][i]=frameBuffer256[j][i];
}
Uart_Printf("Virtual Screen Test(256 color). Press any key[ijkm\\r]!\n");
MoveViewPort2(MODE_COLOR);
Lcd_MoveViewPort(0,0,MODE_COLOR);
}
void Test_LcdStr(void)
{
char aa;
Lcd_Init(MODE_COLOR);
Lcd_DispON();
Slib_ClearScr();
Slib_Init();
//Slib_Printf("\n # ");
//Slib_Printf("\n ### ");
//Slib_Printf(" ## ## ");
//Slib_Printf(" ## ## ");
//Slib_Printf(" ######### ");
//Slib_Printf(" ## ## ");
//Slib_Printf(" ## ## ");
//Slib_Printf(" #### #### ");
Slib_Printf("These texts are on the 1st line ");
aa = Uart_Getch();
Slib_Printf("\nThese texts are on the 2nd line ");
aa = Uart_Getch();
Slib_Printf("\nThese texts are on the 3rd line ");
aa = Uart_Getch();
Slib_Printf("\nThese texts are on the 4th line ");
aa = Uart_Getch();
Slib_Printf("\nThese texts are on the 5th line ");
aa = Uart_Getch();
Slib_Printf("\nThese texts are on the 6th line ");
aa = Uart_Getch();
Slib_Printf("\nThese texts are on the 7th line ");
aa = Uart_Getch();
Slib_Printf("\nThese texts are on the 8th line ");
aa = Uart_Getch();
Slib_Printf("\nThese texts are on the 9th line ");
aa = Uart_Getch();
Slib_Printf("\nThese texts are on the 10th line ");
aa = Uart_Getch();
Slib_Printf("\nThese texts are on the 11th line ");
aa = Uart_Getch();
Slib_Printf("\nThese texts are on the 12th line ");
aa = Uart_Getch();
Slib_Printf("\nThese texts are on the 13th line ");
aa = Uart_Getch();
Slib_Printf("\nThese texts are on the 14th line ");
aa = Uart_Getch();
Slib_Printf("\nThese texts are on the 15th line ");
aa = Uart_Getch();
Slib_ClearScr();
Slib_SetCursor(0,0);
Slib_Printf("\n\n\n****************************************");
Slib_Printf("\n # ####### ### ###");
Slib_Printf("\n ### ## ## #### ####");
Slib_Printf("\n ## ## ## ## ## ## ## ##");
Slib_Printf("\n ## ## ####### ## ### ##");
Slib_Printf("\n ######### ## ## ## # ##");
Slib_Printf("\n ## ## ## ## ## ##");
Slib_Printf("\n### ### #### #### #### ####");
Slib_Printf("\n\n\n****************************************");
aa = Uart_Getch();
Slib_ClearScr();
}
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -