?? int.s
字號:
;/*
;***************************************************************************************************
;*
;* S3C44BOX ARM7TDMI MotherBoard
;*
;* (c) Copyright 2003-2015, Zhang Zhi-gang
;* All Rights Reserved
;*
;* S3C44BOX Initialization Program for 1.0
;*
;* File Name : INT.S
;* By Write : Zhang Zhi-gang ( Barry Zhang )
;* First Write : 2003-07-16 13:14
;* Last Write : 2004-02-24 13:14
;* where Write : Room B201 Shenzhen International Tech-innovation Academy, Kejinan 10 Road ,
;* High-Tech Industrial Park,Shenzhen,China.
;* Function : Advance Initialize
;* 1. Initialize ISR ,stacks
;* 2. Copy code
;* 3. Fill zeros into zero-initialized C-variables
;* 4. INT_Initialize
;***************************************************************************************************
;*/
;/*
;***************************************************************************************************
;* ARM & THUMB
;* If assembled with TASM the variable {CONFIG} will be set to 16
;* If assembled with ARMASM the variable {CONFIG} will be set to 32
;* Set the variable THUMB to TRUE or false depending on whether the
;* file is being assembled with TASM or ARMASM.
;***************************************************************************************************
;*/
GET 2410ADDR.S
GET INTDEF.S
CODE32
;// IMPORT IsrUsbd
IMPORT TouchPanel_LISR
;/*
;***************************************************************************************************
;* INTERRUPT TABLES
;*
;* Define vector table used by INT_IRQ to branch to necessary ISR
;*
;***************************************************************************************************
;*/
AREA INT_IRQ_segment, DATA, READWRITE
INT_IRQ_Vectors
DCD 0 ;// Vector 00
DCD 0 ;// Vector 01
DCD 0 ;// Vector 02
DCD 0 ;// Vector 03
DCD 0 ;// Vector 04
DCD 0 ;// Vector 05
DCD 0 ;// Vector 06
DCD 0 ;// Vector 07
DCD 0 ;// Vector 08
DCD 0 ;// Vector 09
DCD 0 ;// Vector 10
DCD 0 ;// Vector 11
DCD 0 ;// Vector 12
DCD 0 ;// Vector 13
DCD 0 ;// Vector 14
DCD 0 ;// Vector 15
DCD 0 ;// Vector 16
DCD 0 ;// Vector 17
DCD 0 ;// Vector 18
DCD 0 ;// Vector 19
DCD 0 ;// Vector 20
DCD 0 ;// Vector 21
DCD 0 ;// Vector 22
DCD 0 ;// Vector 23
DCD 0 ;// Vector 24
DCD INT_USBD_Shell ;// Vector 25
DCD 0 ;// Vector 26
DCD 0 ;// Vector 27
DCD INT_UART0_Shell ;// Vector 28
DCD 0 ;// Vector 29
DCD 0 ;// Vector 30
DCD INT_ADC_Shell ;// Vector 31
; //Define the order in which the interrupts will be executed by software (INT_IRQ)
INT_IRQ_Priority
;//DCD Handler_GLOBAL ;// Vector 00
DCD Handler_EINT0 ;// Vector 00
DCD Handler_EINT1 ;// Vector 01
DCD Handler_EINT2 ;// Vector 02
DCD Handler_EINT3 ;// Vector 03
DCD Handler_EINT4_7 ;// Vector 04
DCD Handler_EINT8_23 ;// Vector 05
DCD 6
DCD Handler_nBATT_FLT ;// Vector 07
DCD Handler_TICK ;// Vector 08
DCD Handler_WDT ;// Vector 09
DCD Handler_TIMER0 ;// Vector 10
DCD Handler_TIMER1 ;// Vector 11
DCD Handler_TIMER2 ;// Vector 12
DCD Handler_TIMER3 ;// Vector 13
DCD Handler_TIMER4 ;// Vector 14
DCD Handler_UART2 ;// Vector 15
DCD Handler_LCD ;// Vector 16
DCD Handler_DMA0 ;// Vector 17
DCD Handler_DMA1 ;// Vector 18
DCD Handler_DMA2 ;// Vector 19
DCD Handler_DMA3 ;// Vector 20
DCD Handler_SDI ;// Vector 21
DCD Handler_SPI0 ;// Vector 22
DCD Handler_UART1 ;// Vector 23
DCD 24
DCD Handler_USBD ;// Vector 25
DCD Handler_USBH ;//VECTOR 26
DCD Handler_IIC ;//VECTOR 27
DCD Handler_UART0 ;//VECTOR 28
DCD Handler_SPI1 ;//VECTOR 29
DCD Handler_RTC ;//VECTOR 30
DCD Handler_ADC ;//VECTOR 31
IRQ_PRIORITY_END
;/*
;***************************************************************************************************
;* 引入連接器生成的代碼始末地址
;*
;***************************************************************************************************
;*/
AREA INT_CODE, CODE, READONLY
BSS_Start_Ptr
IMPORT |Image$$ZI$$Base|
DCD |Image$$ZI$$Base|
BSS_End_Ptr
IMPORT |Image$$ZI$$Limit|
DCD |Image$$ZI$$Limit|
ROM_Data_Start_Ptr
IMPORT |Image$$RO$$Limit|
DCD |Image$$RO$$Limit|
RAM_Start_Ptr
IMPORT |Image$$RW$$Base|
DCD |Image$$RW$$Base|
;//Current_Thread
;// DCD TCD_Current_Thread
;/*
;***************************************************************************************************
;* INT_Intialize
;*
;* Function : Intialize
;* DESCRIPTION:
;* This function sets up the global system stack variable and
;* transfers control to the target independent initialization
;* function INC_Initialize. Responsibilities of this function
;* include the following:
;* - Setup necessary processor/system control registers
;* - Initialize the vector table
;* - Setup the system stack pointers
;* - Setup the timer interrupt
;* - Calculate the timer HISR stack and priority
;* - Calculate the first available memory address
;* - Transfer control to INC_Initialize to initialize all of
;* the system components.
;*
;* Returns :
;*
;***************************************************************************************************
;*/
EXPORT INT_Intialize
INT_Intialize
;/*
;***************************************************************************************************
;* Copy the code from ROM to the RAM
;*
;***************************************************************************************************
;*/
LDR r0,ROM_Data_Start_Ptr ;// Get the start of the
LDR r1,RAM_Start_Ptr ;// Get the start of the
LDR r3,BSS_Start_Ptr ;// Pickup the start of
CMP r0,r1 ;// Check for any initial
;// variable values
BEQ INT_BSS_Clear ;// If none, zero memory
INT_ROM_Vars_Copy
CMP r1,r3 ;// Check to set flags
LDRCC r2, [r0], #4 ;// Get value from ROM
STRCC r2, [r1], #4 ;// Put value in RAM
BCC INT_ROM_Vars_Copy ;// Continue
INT_BSS_Clear
LDR r1,BSS_End_Ptr ;// Pickup the end of the BSS area
MOV r2,#0 ;// Clear value in r2
INT_BSS_Clear_Loop
CMP r3,r1 ;// Are the start and end equal?
STRCC r2,[r3],#4 ;// Clear a word
BCC INT_BSS_Clear_Loop ;// If so, continue with BSS clear
;/*
;***************************************************************************************************
;* Initialize the system stack pointers
;* 初始化堆棧
;*
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -