//
// Copyright (c) Microsoft Corporation.  All rights reserved.
//
//
// Use of this source code is subject to the terms of the Microsoft end-user
// license agreement (EULA) under which you licensed this SOFTWARE PRODUCT.
// If you did not accept the terms of the EULA, you are not authorized to use
// this source code. For a copy of the EULA, please see the LICENSE.RTF on your
// install media.
//
//------------------------------------------------------------------------------
//
//  Header: cpu_base_reg.h
//
//  This header file defines the Physical Addresses (PA) of 
//  the base registers for the System on Chip (SoC) components.
//
#ifndef __S3C2440A_BASE_REG_H
#define __S3C2440A_BASE_REG_H

#if __cplusplus
extern "C" {
#endif

//------------------------------------------------------------------------------
//  INFORMATION
//
//  The physical addresses for SoC registers are fixed, hence they are defined
//  in the CPU's common directory. The virtual addresses of the SoC registers
//  are defined by the OEM and are configured in the platform's configuration 
//  directory by the file: .../PLATFORM/<NAME>/SRC/CONFIG/CPU_BASE_REG_CFG.H.
//
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
//  NAMING CONVENTIONS
//
//  CPU_BASE_REG_ is the standard prefix for CPU base registers.
//
//  Memory ranges are accessed using physical, uncached, or cached addresses,
//  depending on the system state. The following abbreviations are used for
//  each addressing type:
//
//      PA - physical address
//      UA - uncached virtual address
//      CA - cached virtual address
//
//  The naming convention for CPU base registers is:
//
//      CPU_BASE_REG_<ADDRTYPE>_<SUBSYSTEM>
//
//------------------------------------------------------------------------------

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_MEMCTRL
//
//  Locates the memory controller register block.
//

#define S3C2440A_BASE_REG_PA_MEMCTRL            (0x48000000)            

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_USB
//
//  Locates the USB controller register block.
//
#define S3C2440A_BASE_REG_PA_USB                (0x49000000)

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_INTR
//
//  Locates the interrupt (INTR) controller register block.
//
#define S3C2440A_BASE_REG_PA_INTR               (0x4A000000)

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_DMA
//
//  Locates the DMA controller register block.
//
#define S3C2440A_BASE_REG_PA_DMA                (0x4B000000)            

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_CLOCK_POWER
//
//  Locates the clock and power register block
//
#define S3C2440A_BASE_REG_PA_CLOCK_POWER        (0x4C000000)

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_LCD
//
//  Locates the LCD controller register block.
//
#define S3C2440A_BASE_REG_PA_LCD                (0x4D000000)           

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_NAND
//
//  Locates the NAND controller register block.
//

#define S3C2440A_BASE_REG_PA_NAND               (0x4E000000)            

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_UART0/1/2
//
//  Locates the UART register blocks.
//
#define S3C2440A_BASE_REG_PA_UART0              (0x50000000)            
#define S3C2440A_BASE_REG_PA_UART1              (0x50004000)            
#define S3C2440A_BASE_REG_PA_UART2              (0x50008000)            

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_PWM
//
//  Locates the PWM timer controller register block.
//

#define S3C2440A_BASE_REG_PA_PWM                (0x51000000)            

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_USBD
//
//  Locates the USB device controller register block.
//

#define S3C2440A_BASE_REG_PA_USBD               (0x52000000)            

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_WATCHDOG
//
//  Locates the watchdog timer register block.
//

#define S3C2440A_BASE_REG_PA_WATCHDOG           (0x53000000)            

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_IICBUS
//
//  Locates the IIC Bus register block.
//
#define S3C2440A_BASE_REG_PA_IICBUS             (0x54000000)           

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_IISBUS
//
//  Locates the IIS Bus register block.
//
#define S3C2440A_BASE_REG_PA_IISBUS             (0x55000000)           

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_IOPORT
//
//  Locates the IO port controller register block.
//
#define S3C2440A_BASE_REG_PA_IOPORT             (0x56000000)            

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_RTC
//
//  Locates the real time clock (RTC) register block.
//
#define S3C2440A_BASE_REG_PA_RTC                (0x57000000)

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_ADC
//
//  Locates the A/D converter register block.
//
#define S3C2440A_BASE_REG_PA_ADC                (0x58000000)           

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_SPI
//
//  Locates the SPI register block.
//
#define S3C2440A_BASE_REG_PA_SPI                (0x59000000)           

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_SDI
//
//  Locates the SDI register block.
//
#define S3C2440A_BASE_REG_PA_SDI                (0x5A000000)           

//------------------------------------------------------------------------------
//
//  Define:  S3C2440A_BASE_REG_PA_CAM
//
//  Locates the CAM register block.
//
#define S3C2440A_BASE_REG_PA_CAM                (0x4F000000)           

//------------------------------------------------------------------------------

#if __cplusplus
}
#endif

#endif