?? mcp2510.h
字號(hào):
#include "def.h"
/********************** MCP2510 Regrister *********************************/
// Register offsets into the transmit buffers.
#define MCP2510REG_TXBnCTRL 0
#define MCP2510REG_TXBnSIDH 1
#define MCP2510REG_TXBnSIDL 2
#define MCP2510REG_TXBnEID8 3
#define MCP2510REG_TXBnEID0 4
#define MCP2510REG_TXBnDLC 5
#define MCP2510REG_TXBnD0 6
#define MCP2510REG_TXBnD1 7
#define MCP2510REG_TXBnD2 8
#define MCP2510REG_TXBnD3 9
#define MCP2510REG_TXBnD4 10
#define MCP2510REG_TXBnD5 11
#define MCP2510REG_TXBnD6 12
#define MCP2510REG_TXBnD7 13
#define MCP2510REG_CANSTAT 14
#define MCP2510REG_CANCTRL 15
//
#define MCP2510LREG_SIDH 0
#define MCP2510LREG_SIDL 1
#define MCP2510LREG_EID8 2
#define MCP2510LREG_EID0 3
/******************* Bits in the TXBnCTRL registers.***************************/
#define TXB_TXBUFE_M 0x80
#define TXB_ABTF_M 0x40
#define TXB_MLOA_M 0x20
#define TXB_TXERR_M 0x10
#define TXB_TXREQ_M 0x08
#define TXB_TXIE_M 0x04
#define TXB_TXP10_M 0x03
#define DLC_MASK 0x0F
#define RTR_MASK 0x40
#define TXB0CTRL 0x30
#define TXB0SIDH 0x31
#define TXB1CTRL 0x40
#define TXB1SIDH 0x41
#define TXB2CTRL 0x50
#define TXB2SIDH 0x51
#define TXPRIOHIGH 0x03
#define TXPRIOHIGHLOW 0x02
#define TXPRIOLOWHIGH 0x01
#define TXPRIOLOW 0x00
#define TXB_EXIDE_M 0x08 // In TXBnSIDL
#define TXB_RTR_M 0x40 // In TXBnDLC
#define RXB_IDE_M 0x08 // In RXBnSIDL
#define RXB_RTR_M 0x40 // In RXBnDLC
#define BFPCTRL 0x0C
#define B2RTS 0x20
#define B1RTS 0x10
#define B0RTS 0x08
#define B2RTSM 0x04
#define B1RTSM 0x02
#define B0RTSM 0x01
#define TEC 0x1C
#define REC 0x1D
#define CLKCTRL MCP2510REG_CANCTRL
#define RXF0SIDH 0
#define RXF0SIDL 1
#define RXF0EID8 2
#define RXF0EID0 3
#define RXF1SIDH 4
#define RXF1SIDL 5
#define RXF1EID8 6
#define RXF1EID0 7
#define RXF2SIDH 8
#define RXF2SIDL 9
#define RXF2EID8 10
#define RXF2EID0 11
#define RXF3SIDH 16
#define RXF3SIDL 17
#define RXF3EID8 18
#define RXF3EID0 19
#define RXF4SIDH 20
#define RXF4SIDL 21
#define RXF4EID8 22
#define RXF4EID0 23
#define RXF5SIDH 24
#define RXF5SIDL 25
#define RXF5EID8 26
#define RXF5EID0 27
#define RXF_EXIDE_M 0x08
#define RXM0SIDH 0x20
#define RXM1SIDH 0x24
#define CNF3 0x28
#define CNF2 0x29
#define CNF1 0x2A
#define CANINTE 0x2B
#define CANINTF 0x2C
#define EFLG 0x2D
#define TXRTSCTRL 0x0D
#define EFLG_RX1OVR 0x80
#define EFLG_RX0OVR 0x40
#define EFLG_TXBO 0x20
#define EFLG_TXEP 0x10
#define EFLG_RXEP 0x08
#define EFLG_TXWAR 0x04
#define EFLG_RXWAR 0x02
#define EFLG_EWARN 0x01
#define SJW1 0x00
#define SJW2 0x40
#define SJW3 0x80
#define SJW4 0xC0
#define BTLMODE_CNF3 0x80
#define SAMP1 0x00
#define SAMP3 0x40
#define SEG1 0x00
#define SEG2 0x01
#define SEG3 0x02
#define SEG4 0x03
#define SEG5 0x04
#define SEG6 0x05
#define SEG7 0x06
#define SEG8 0x07
#define BRP1 0x00
#define BRP2 0x01
#define BRP3 0x02
#define BRP4 0x03
#define BRP5 0x04
#define BRP6 0x05
#define BRP7 0x06
#define BRP8 0x07
#define IVRIE 0x80
#define WAKIE 0x40
#define ERRIE 0x20
#define TX2IE 0x10
#define TX1IE 0x08
#define TX0IE 0x04
#define RX1IE 0x02
#define RX0IE 0x01
#define NO_IE 0x00
#define IVRINT 0x80
#define WAKINT 0x40
#define ERRINT 0x20
#define TX2INT 0x10
#define TX1INT 0x08
#define TX0INT 0x04
#define RX1INT 0x02
#define RX0INT 0x01
#define NO_INT 0x00
#define RXB0CTRL 0x60
#define RXB1CTRL 0x70
#define RXB_RXRDY 0x80
#define RXB_RXM1 0x40
#define RXB_RXM0 0x20
#define RXB_RX_ANY 0x60
#define RXB_RX_EXT 0x40
#define RXB_RX_STD 0x20
#define RXB_RX_STDEXT 0x00
#define RXB_RXMx_M 0x60
// #define RXB_RXIE_M 0x10
#define RXB_RXRTR 0x08 // In RXBnCTRL
#define RXB_BUKT 0x04
#define RXB_BUKT_RO 0x02
#define RXB_FILHIT 0x01
#define RXB_FILHIT2 0x04
#define RXB_FILHIT1 0x02
#define RXB_FILHIT_M 0x07
#define RXB_RXF5 0x05
#define RXB_RXF4 0x04
#define RXB_RXF3 0x03
#define RXB_RXF2 0x02
#define RXB_RXF1 0x01
#define RXB_RXF0 0x00
#define CLKEN 0x04
#define CLK1 0x00
#define CLK2 0x01
#define CLK4 0x02
#define CLK8 0x03
#define MODE_NORMAL 0x00
#define MODE_SLEEP 0x20
#define MODE_LOOPBACK 0x40
#define MODE_LISTENONLY 0x60
#define MODE_CONFIG 0xE0
#define ABORT 0x10
typedef enum{
BandRate_125kbps,
BandRate_250kbps,
BandRate_500kbps,
BandRate_1Mbps
}CanBandRate;
// Start the transmission from one of the tx buffers.
#define MCP2510_transmit(address) do{MCP2510_WriteBits(address, TXB_TXREQ_M, TXB_TXREQ_M);}while(0)
void MCP2510_Reset(void);
void MCP2510_Write(int address, int value);
unsigned char MCP2510_Read(int address);
void init_MCP2510(CanBandRate bandrate);
void MCP2510_SetBandRate(CanBandRate bandrate, BOOL IsBackNormal);
//void MCP2510_Write_Can_ID(int address, U32 can_id, BOOL IsExt);
unsigned char MCP2510_ReadStatus(void);
void MCP2510_WriteBits(int ,int ,int );
//void MCP2510_WriteBits(int ,int ,int );
//unsigned char MCP2510_SRead( int );
//unsigned char MCP2510_SRead( int address);
void MCP2510_Swrite(int , unsigned char,unsigned char );
//void MCP2510_Swrite(int address,unsigned char value)
BOOL MCP2510_Read_Can_ID( int address, U32* can_id);
//BOOL MCP2510_Read_Can(U8 nbuffer, BOOL* rxRTR, U32* can_id, U8* data , U8* dlc);
//void MCP2510_Write_Can( U8 nbuffer, BOOL ext, U32 can_id, BOOL rxRTR, U8* data,U8 dlc );
void MCP2510_Write_Can_ID(int address, U32 can_id, BOOL IsExt);
//void canWrite(U32 id, U8 *pdata, unsigned char dlc, BOOL IsExt, BOOL rxRTR);
void SendSIOData(unsigned char );
//void CAN_Test(void);
unsigned char ReadSIOData(void);
void Targetinit(void);
void canSetup(void);
int canPoll(void);
?? 快捷鍵說明
復(fù)制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號(hào)
Ctrl + =
減小字號(hào)
Ctrl + -