;-----------------------------------------------------------------------------;  Copyright (C) 2001 CYGNAL INTEGRATED PRODUCTS, INC.;  All rights reserved.
;;;;  FILE NAME   :  BLINK.ASM ;  TARGET MCU  :  C8051F2xx ;  DESCRIPTION :  This program illustrates how to disable the watchdog timer,;                 configure a port and write to a port I/O pin.;; 	NOTES: ;;-----------------------------------------------------------------------------$include (c8051f200.inc)               ; Include register definition file.;-----------------------------------------------------------------------------; EQUATES;-----------------------------------------------------------------------------
GREEN_LED      equ   P2.4              ; Port I/O pin connected to Green LED.	;-----------------------------------------------------------------------------; RESET and INTERRUPT VECTORS;-----------------------------------------------------------------------------               ; Reset Vector               cseg AT 0               ljmp Main               ; Locate a jump to the start of code at 
                                       ; the reset vector.;-----------------------------------------------------------------------------; CODE SEGMENT;-----------------------------------------------------------------------------Blink          segment  CODE
               rseg     Blink          ; Switch to this code segment.
               using    0              ; Specify register bank for the
                                       ; following program code.Main:          ; Disable the WDT. (IRQs not enabled at this point.)               ; If interrupts were enabled, we would need to explicitly 
               ; disable them so that the 2nd move to WDTCN occurs no more 
               ; than four clock cycles after the first move to WDTCN.               mov   WDTCN, #0DEh               mov   WDTCN, #0ADh               ; Set P2.4 (LED) as digital output in push-pull mode.                 orl   PRT2CF, #10h	                orl   P2MODE, #10h                ; Initialize LED to OFF               clr   GREEN_LED               ; Simple delay loop.Loop2:         mov   R7, #03h			Loop1:         mov   R6, #00hLoop0:         mov   R5, #00h               djnz  R5, $               djnz  R6, Loop0               djnz  R7, Loop1               cpl   GREEN_LED         ; Toggle LED.               jmp   Loop2;-----------------------------------------------------------------------------; End of file.END