#############################################################################
#
#  Makefile - makefile for Wind River SBC405GP Evaluation Board
#
#  Copyright 1988-2000 Wind River Systems, Inc.
#
#  modification history
#  --------------------
#  01a,22apr01,gh   adopted from Walnut BSP Makefile (ver 01c).
#
#  DESCRIPTION
#  -----------
#  This file contains rules for building the various targets 
#  for the SBC405GP Evaluation Board. 
#
#  TARGETS
#  -------
#  This section briefly lists the available build targets. 
#
#  Target Build             Description
#  ------------             -----------
#  bootrom_uncmp.hex     -  bootrom image, hex format
#  bootrom_uncmp.bin     -  bootrom image, est binary format
#  bootrom.hex           -  bootrom compressed image, hex format
#  bootrom.bin           -  bootrom compressed image, H.S.I binary format
#  vxWorks.bdx           -  standard vxWorks image
#  clean.hsi             -  does a make clean and removes *.bin/bdx/etc
#
#  Note(s):		         -  Wind River HSI related targets are displayed in the Tornado
#                           Project Menu (Windows Version).
#
#############################################################################

CPU              = PPC405
TOOL             = gnu

TGT_DIR = $(WIND_BASE)/target

include $(TGT_DIR)/h/make/defs.bsp
include $(TGT_DIR)/h/make/defs.$(WIND_HOST_TYPE)
include $(TGT_DIR)/h/make/defs.$(TOOL)
include $(TGT_DIR)/h/make/make.$(CPU)$(TOOL)

##
## Only redefine make definitions below this point, or your definitions will
## be overwritten by the makefile stubs above.
##

TARGET_DIR       = CypressUSB-ppc405gp
VENDOR           = WindRiver
BOARD            = SBC405GP

USR_ENTRY        = usrInit

##
## The constants ROM_TEXT_ADRS, ROM_SIZE, and RAM_HIGH_ADRS are defined
## in config.h, MakeSkel, Makefile, and Makefile.*
## All definitions for these constants must be identical.
##

ROM_TEXT_ADRS      = ffe00200 # ROM entry address
ROM_SIZE           = 000ff000 # number of bytes of ROM space

RAM_LOW_ADRS       = 00010000
RAM_HIGH_ADRS      = 01C00000

##
##   hex utility parameters
##

HEX_FLAGS          = -a $(ROM_TEXT_ADRS)

##
## See Header before altering the EXTRA_DEFINE and MACH_EXTRA lines below.
##

#MACH_EXTRA    = #fei82557End.obj
MACH_EXTRA    = usrUsbTool.o usbPciStub.o usbHcdSl811hsLib.o
EXTRA_MODULES = #$(BSP_DIR)/fei82557End.obj

##
## Debug Information
##

ADDED_CFLAGS	= -gdwarf -O0

##
## Linker Flags
##

LDFLAGS = -X -N -Map wrSbc405gp.map

##
## Only redefine make definitions above this point, or the expansion of 
## makefile target dependencies may be incorrect.
##

include $(TGT_DIR)/h/make/rules.bsp
include $(TGT_DIR)/h/make/rules.$(WIND_HOST_TYPE)

HSI_CONVERT = $(WIND_BASE)/host/$(WIND_HOST_TYPE)/bin/convert
POST_POST_BUILD_RULE = echo

############################################################################
#  General Cleanup Rules
############################################################################
clean.hsi: clean 
	$(RM) *~
	$(RM) *.bkp
	$(RM) *.bdx
	$(RM) *.map
	$(RM) *.bin
	$(RM) *.bak
	$(RM) *.hex
	$(RM) *.ab
	$(RM) rampart
	$(RM) *.abx
	$(RM) *.vxWorks
	$(RM) files

############################################################################
#  Rule for creating a bootrom binfile for programming bootflash 
#  with Wind River HSI Emulator.   (compressed, copies to ram)
############################################################################

.PHONY : bootrom.bin    save.bootrom 

bootrom.bin: bootrom.hex
	$(HSI_CONVERT) bootrom.hex -a -l ffe00000 -u fff00000

############################################################################
#  Rule for creating a bootrom_uncmp binfile for programming bootflash 
#  with Wind River HSI Emulator.   (uncompressed, copies to ram)
############################################################################

.PHONY : bootrom_uncmp.bin    save.bootrom_uncmp 

bootrom_uncmp.bin: bootrom_uncmp.hex
	$(HSI_CONVERT) bootrom_uncmp.hex -a -l ffe00000 -u fff00000

############################################################################
#  Rule for creating a RAM downloadable vxWorks image with a 
#  WDB Agent, over the network, with no demo program.
#  (Note, this is a standard 'vxWorks' image --- i.e. make vxWorks )
############################################################################

.PHONY : vxWorks.bdx save.vxWorks save.vxWorks.lean bdxconvert

bdxconvert:
	$(HSI_CONVERT) -w vxWorks -b vxWorks.bdx -c vxWorks.ab -t ppc

vxWorks.bdx: vxWorks bdxconvert
	$(POST_POST_BUILD_RULE)

############################################################################
#  Rule for creating workspace and project
############################################################################

bsp2wsp: bsp2prj
	vxcopy $(TARGET_DIR).wsp_ $(WIND_BASE)/target/proj/$(TARGET_DIR).wsp