win32_nmres=`eval $NM -f posix -A $1 | \	sed -n -e '1,100{/ I /{x;/import/!{s/^/import/;h;p;};x;};}'`      if test "X$win32_nmres" = "Ximport" ; then        win32_libid_type="x86 archive import"      else        win32_libid_type="x86 archive static"      fi    fi    ;;  *DLL*)    win32_libid_type="x86 DLL"    ;;  *executable*) # but shell scripts are "executable" too...    case $win32_fileres in    *MS\ Windows\ PE\ Intel*)      win32_libid_type="x86 DLL"      ;;    esac    ;;  esac  $echo $win32_libid_type}# func_infer_tag arg# Infer tagged configuration to use if any are available and# if one wasn't chosen via the "--tag" command line option.# Only attempt this if the compiler in the base compile# command doesn't match the default compiler.# arg is usually of the form 'gcc ...'func_infer_tag () {    if test -n "$available_tags" && test -z "$tagname"; then      CC_quoted=      for arg in $CC; do	case $arg in	  *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")	  arg="\"$arg\""	  ;;	esac	CC_quoted="$CC_quoted $arg"      done      case $@ in      # Blanks in the command may have been stripped by the calling shell,      # but not from the CC environment variable when configure was run.      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;;      # Blanks at the start of $base_compile will cause this to fail      # if we don't check for them as well.      *)	for z in $available_tags; do	  if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then	    # Evaluate the configuration.	    eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`"	    CC_quoted=	    for arg in $CC; do	    # Double-quote args containing other shell metacharacters.	    case $arg in	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")	      arg="\"$arg\""	      ;;	    esac	    CC_quoted="$CC_quoted $arg"	  done	    case "$@ " in	      " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*)	      # The compiler in the base compile command matches	      # the one in the tagged configuration.	      # Assume this is the tagged configuration we want.	      tagname=$z	      break	      ;;	    esac	  fi	done	# If $tagname still isn't set, then no tagged configuration	# was found and let the user know that the "--tag" command	# line option must be used.	if test -z "$tagname"; then	  $echo "$modename: unable to infer tagged configuration"	  $echo "$modename: specify a tag with \`--tag'" 1>&2	  exit $EXIT_FAILURE#        else#          $echo "$modename: using $tagname tagged configuration"	fi	;;      esac    fi}# End of Shell function definitions###################################### Darwin suckseval std_shrext=\"$shrext_cmds\"# Parse our command line options once, thoroughly.while test "$#" -gt 0do  arg="$1"  shift  case $arg in  -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;;  *) optarg= ;;  esac  # If the previous option needs an argument, assign it.  if test -n "$prev"; then    case $prev in    execute_dlfiles)      execute_dlfiles="$execute_dlfiles $arg"      ;;    tag)      tagname="$arg"      preserve_args="${preserve_args}=$arg"      # Check whether tagname contains only valid characters      case $tagname in      *[!-_A-Za-z0-9,/]*)	$echo "$progname: invalid tag name: $tagname" 1>&2	exit $EXIT_FAILURE	;;      esac      case $tagname in      CC)	# Don't test for the "default" C tag, as we know, it's there, but	# not specially marked.	;;      *)	if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then	  taglist="$taglist $tagname"	  # Evaluate the configuration.	  eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`"	else	  $echo "$progname: ignoring unknown tag $tagname" 1>&2	fi	;;      esac      ;;    *)      eval "$prev=\$arg"      ;;    esac    prev=    prevopt=    continue  fi  # Have we seen a non-optional argument yet?  case $arg in  --help)    show_help=yes    ;;  --version)    $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP"    $echo    $echo "Copyright (C) 2003  Free Software Foundation, Inc."    $echo "This is free software; see the source for copying conditions.  There is NO"    $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE."    exit $EXIT_SUCCESS    ;;  --config)    ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath    # Now print the configurations for the tags.    for tagname in $taglist; do      ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath"    done    exit $EXIT_SUCCESS    ;;  --debug)    $echo "$progname: enabling shell trace mode"    set -x    preserve_args="$preserve_args $arg"    ;;  --dry-run | -n)    run=:    ;;  --features)    $echo "host: $host"    if test "$build_libtool_libs" = yes; then      $echo "enable shared libraries"    else      $echo "disable shared libraries"    fi    if test "$build_old_libs" = yes; then      $echo "enable static libraries"    else      $echo "disable static libraries"    fi    exit $EXIT_SUCCESS    ;;  --finish) mode="finish" ;;  --mode) prevopt="--mode" prev=mode ;;  --mode=*) mode="$optarg" ;;  --preserve-dup-deps) duplicate_deps="yes" ;;  --quiet | --silent)    show=:    preserve_args="$preserve_args $arg"    ;;  --tag) prevopt="--tag" prev=tag ;;  --tag=*)    set tag "$optarg" ${1+"$@"}    shift    prev=tag    preserve_args="$preserve_args --tag"    ;;  -dlopen)    prevopt="-dlopen"    prev=execute_dlfiles    ;;  -*)    $echo "$modename: unrecognized option \`$arg'" 1>&2    $echo "$help" 1>&2    exit $EXIT_FAILURE    ;;  *)    nonopt="$arg"    break    ;;  esacdoneif test -n "$prevopt"; then  $echo "$modename: option \`$prevopt' requires an argument" 1>&2  $echo "$help" 1>&2  exit $EXIT_FAILUREfi# If this variable is set in any of the actions, the command in it# will be execed at the end.  This prevents here-documents from being# left over by shells.exec_cmd=if test -z "$show_help"; then  # Infer the operation mode.  if test -z "$mode"; then    $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2    $echo "*** Future versions of Libtool will require -mode=MODE be specified." 1>&2    case $nonopt in    *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*)      mode=link      for arg      do	case $arg in	-c)	   mode=compile	   break	   ;;	esac      done      ;;    *db | *dbx | *strace | *truss)      mode=execute      ;;    *install*|cp|mv)      mode=install      ;;    *rm)      mode=uninstall      ;;    *)      # If we have no mode, but dlfiles were specified, then do execute mode.      test -n "$execute_dlfiles" && mode=execute      # Just use the default operation mode.      if test -z "$mode"; then	if test -n "$nonopt"; then	  $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2	else	  $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2	fi      fi      ;;    esac  fi  # Only execute mode is allowed to have -dlopen flags.  if test -n "$execute_dlfiles" && test "$mode" != execute; then    $echo "$modename: unrecognized option \`-dlopen'" 1>&2    $echo "$help" 1>&2    exit $EXIT_FAILURE  fi  # Change the help message to a mode-specific one.  generic_help="$help"  help="Try \`$modename --help --mode=$mode' for more information."  # These modes are in order of execution frequency so that they run quickly.  case $mode in  # libtool compile mode  compile)    modename="$modename: compile"    # Get the compilation command and the source file.    base_compile=    srcfile="$nonopt"  #  always keep a non-empty value in "srcfile"    suppress_opt=yes    suppress_output=    arg_mode=normal    libobj=    later=    for arg    do      case "$arg_mode" in      arg  )	# do not "continue".  Instead, add this to base_compile	lastarg="$arg"	arg_mode=normal	;;      target )	libobj="$arg"	arg_mode=normal	continue	;;      normal )	# Accept any command-line options.	case $arg in	-o)	  if test -n "$libobj" ; then	    $echo "$modename: you cannot specify \`-o' more than once" 1>&2	    exit $EXIT_FAILURE	  fi	  arg_mode=target	  continue	  ;;	-static | -prefer-pic | -prefer-non-pic)	  later="$later $arg"	  continue	  ;;	-no-suppress)	  suppress_opt=no	  continue	  ;;	-Xcompiler)	  arg_mode=arg  #  the next one goes into the "base_compile" arg list	  continue      #  The current "srcfile" will either be retained or	  ;;            #  replaced later.  I would guess that would be a bug.	-Wc,*)	  args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"`	  lastarg=	  save_ifs="$IFS"; IFS=',' 	  for arg in $args; do	    IFS="$save_ifs"	    # Double-quote args containing other shell metacharacters.	    # Many Bourne shells cannot handle close brackets correctly	    # in scan sets, so we specify it separately.	    case $arg in	      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")	      arg="\"$arg\""	      ;;	    esac	    lastarg="$lastarg $arg"	  done	  IFS="$save_ifs"	  lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"`	  # Add the arguments to base_compile.	  base_compile="$base_compile $lastarg"	  continue	  ;;	* )	  # Accept the current argument as the source file.	  # The previous "srcfile" becomes the current argument.	  #	  lastarg="$srcfile"	  srcfile="$arg"	  ;;	esac  #  case $arg	;;      esac    #  case $arg_mode      # Aesthetically quote the previous argument.      lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"`      case $lastarg in      # Double-quote args containing other shell metacharacters.      # Many Bourne shells cannot handle close brackets correctly      # in scan sets, so we specify it separately.      *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \	]*|*]*|"")	lastarg="\"$lastarg\""	;;      esac      base_compile="$base_compile $lastarg"    done # for arg    case $arg_mode in    arg)      $echo "$modename: you must specify an argument for -Xcompile"      exit $EXIT_FAILURE      ;;    target)      $echo "$modename: you must specify a target with \`-o'" 1>&2      exit $EXIT_FAILURE      ;;    *)      # Get the name of the library object.      [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'`      ;;    esac    # Recognize several different file suffixes.    # If the user specifies -o file.o, it is replaced with file.lo    xform='[cCFSifmso]'    case $libobj in    *.ada) xform=ada ;;    *.adb) xform=adb ;;    *.ads) xform=ads ;;    *.asm) xform=asm ;;    *.c++) xform=c++ ;;    *.cc) xform=cc ;;    *.ii) xform=ii ;;    *.class) xform=class ;;    *.cpp) xform=cpp ;;    *.cxx) xform=cxx ;;    *.f90) xform=f90 ;;    *.for) xform=for ;;    *.java) xform=java ;;    esac    libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`    case $libobj in    *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;;    *)      $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2      exit $EXIT_FAILURE      ;;    esac    func_infer_tag $base_compile    for arg in $later; do      case $arg in      -static)	build_old_libs=yes	continue	;;      -prefer-pic)	pic_mode=yes	continue	;;      -prefer-non-pic)	pic_mode=no	continue	;;      esac    done    objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'`    xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'`    if test "X$xdir" = "X$obj"; then      xdir=    else      xdir=$xdir/    fi    lobj=${xdir}$objdir/$objname    if test -z "$base_compile"; then      $echo "$modename: you must specify a compilation command" 1>&2      $echo "$help" 1>&2      exit $EXIT_FAILURE    fi    # Delete any leftover library objects.    if test "$build_old_libs" = yes; then      removelist="$obj $lobj $libobj ${libobj}T"    else      removelist="$lobj $libobj ${libobj}T"