?? 16f877.h
字號:
//////// Standard Header file for the PIC16F877 device ////////
#device PIC16F877
#nolist
/////////////////////////////// I/O definitions for INPUT() and OUTPUT_xxx()
#define PIN_A0 40
#define PIN_A1 41
#define PIN_A2 42
#define PIN_A3 43
#define PIN_A4 44
#define PIN_A5 45
#define PIN_B0 48
#define PIN_B1 49
#define PIN_B2 50
#define PIN_B3 51
#define PIN_B4 52
#define PIN_B5 53
#define PIN_B6 54
#define PIN_B7 55
#define PIN_C0 56
#define PIN_C1 57
#define PIN_C2 58
#define PIN_C3 59
#define PIN_C4 60
#define PIN_C5 61
#define PIN_C6 62
#define PIN_C7 63
#define PIN_D0 64
#define PIN_D1 65
#define PIN_D2 66
#define PIN_D3 67
#define PIN_D4 68
#define PIN_D5 69
#define PIN_D6 70
#define PIN_D7 71
#define PIN_E0 72
#define PIN_E1 73
#define PIN_E2 74
/////////////////////////////// Useful defines
#define FALSE 0
#define TRUE 1
#define BYTE int
#define BOOLEAN short int
#define getc getch
#define getchar getch
#define puts(s) {printf(s); putchar(13); putchar(10);}
#define putc putchar
/////////////////////////////// Constants used for RESTART_CAUSE()
#define WDT_FROM_SLEEP 0
#define WDT_TIMEOUT 8
#define MCLR_FROM_SLEEP 16
#define NORMAL_POWER_UP 24
/////////////////////////////// Constants used for SETUP_COUNTERS()
#define RTCC_INTERNAL 0
#define RTCC_EXT_L_TO_H 32
#define RTCC_EXT_H_TO_L 48
#define RTCC_DIV_2 0
#define RTCC_DIV_4 1
#define RTCC_DIV_8 2
#define RTCC_DIV_16 3
#define RTCC_DIV_32 4
#define RTCC_DIV_64 5
#define RTCC_DIV_128 6
#define RTCC_DIV_256 7
#define WDT_18MS 8
#define WDT_36MS 9
#define WDT_72MS 10
#define WDT_144MS 11
#define WDT_288MS 12
#define WDT_576MS 13
#define WDT_1152MS 14
#define WDT_2304MS 15
#define L_TO_H 0x40
#define H_TO_L 0
#define RTCC_ZERO 0x0B20 // Used for ENABLE/DISABLE INTERRUPTS
#define INT_RTCC 0x0B20 // Used for ENABLE/DISABLE INTERRUPTS
#define RB_CHANGE 0x0B08 // Used for ENABLE/DISABLE INTERRUPTS
#define INT_RB 0x0B08 // Used for ENABLE/DISABLE INTERRUPTS
#define EXT_INT 0x0B10 // Used for ENABLE/DISABLE INTERRUPTS
#define INT_EXT 0x0B10 // Used for ENABLE/DISABLE INTERRUPTS
#define GLOBAL 0x0BC0 // Used for ENABLE/DISABLE INTERRUPTS
///////////////////////////////////// Constants used for Timer1 and Timer2
#define T1_DISABLED 0
#define T1_INTERNAL 5
#define T1_EXTERNAL 7
#define T1_EXTERNAL_SYNC 3
#define T1_CLK_OUT 8
#define T1_DIV_BY_1 0
#define T1_DIV_BY_2 0x10
#define T1_DIV_BY_4 0x20
#define T1_DIV_BY_8 0x30
#byte TIMER_1_LOW= 0x0e
#byte TIMER_1_HIGH= 0x0f
#define T2_DISABLED 0
#define T2_DIV_BY_1 4
#define T2_DIV_BY_4 5
#define T2_DIV_BY_16 6
#byte TIMER_2= 0x11
#define INT_TIMER1 0x8C01 // Used for ENABLE/DISABLE INTERRUPTS
#define INT_TIMER2 0x8C02 // Used for ENABLE/DISABLE INTERRUPTS
//////////////////////////////////// Constants used for SETUP_CCP1()
#define CCP_OFF 0
#define CCP_CAPTURE_FE 4
#define CCP_CAPTURE_RE 5
#define CCP_CAPTURE_DIV_4 6
#define CCP_CAPTURE_DIV_16 7
#define CCP_COMPARE_SET_ON_MATCH 8
#define CCP_COMPARE_CLR_ON_MATCH 9
#define CCP_COMPARE_INT 0xA
#define CCP_COMPARE_RESET_TIMER 0xB
#define CCP_PWM 0xC
#define CCP_PWM_PLUS_1 0x1c
#define CCP_PWM_PLUS_2 0x2c
#define CCP_PWM_PLUS_3 0x3c
long CCP_1;
#byte CCP_1 = 0x15
#byte CCP_1_LOW= 0x15
#byte CCP_1_HIGH= 0x16
#define INT_CCP1 0x8C04 // Used for ENABLE/DISABLE INTERRUPTS
//////////////////////////////////// Constants used for SETUP_CCP2()
long CCP_2;
#byte CCP_2 = 0x1B
#byte CCP_2_LOW= 0x1B
#byte CCP_2_HIGH= 0x1C
#define INT_CCP2 0x8D01 // Used for ENABLE/DISABLE INTERRUPTS
//////////////////////////////////// Constants used for SETUP_PSP()
#define PSP_ENABLED 0x10
#define PSP_DISABLED 0
#byte PSP_DATA= 8
#define INT_PSP 0x8C80 // Used for ENABLE/DISABLE INTERRUPTS
//////////////////////////////////// Constants used in SETUP_SSP()
#define SPI_MASTER 0x20
#define SPI_SLAVE 0x24
#define SPI_L_TO_H 0
#define SPI_H_TO_L 0x10
#define SPI_CLK_DIV_4 0
#define SPI_CLK_DIV_16 1
#define SPI_CLK_DIV_64 2
#define SPI_CLK_T2 3
#define SPI_SS_DISABLED 1
#define INT_SSP 0x8C08 // Used for ENABLE/DISABLE INTERRUPTS
#define SPI_SAMPLE_AT_END 0x8000
#define SPI_XMIT_L_TO_H 0x4000
#define INT_RDA 0x8C20 // Used for ENABLE/DISABLE INTERRUPTS
#define INT_TBE 0x8C10 // Used for ENABLE/DISABLE INTERRUPTS
#define INT_BUSCOL 0x8D08 // Used for ENABLE/DISABLE INTERRUPTS
///////////////////////////////////// Constants used for SETUP_ADC_PORTS()
#define NO_ANALOGS 0x86 // None
#define ALL_ANALOG 0x80 // RA0 RA1 RA2 RA3 RA5 RE0 RE1 RE2 Ref=Vdd
#define ANALOG_RA3_REF 0x81 // RA0 RA1 RA2 RA5 RE0 RE1 RE2 Ref=RA3
#define A_ANALOG 0x82 // RA0 RA1 RA2 RA3 RA5 Ref=Vdd
#define A_ANALOG_RA3_REF 0x83 // RA0 RA1 RA2 RA5 Ref=RA3
#define RA0_RA1_RA3_ANALOG 0x84 // RA0 RA1 RA3 Ref=Vdd
#define RA0_RA1_ANALOG_RA3_REF 0x85 // RA0 RA1 Ref=RA3
#define ANALOG_RA3_RA2_REF 0x88 // RA0 RA1 RA5 RE0 RE1 RE2 Ref=RA2,RA3
#define ANALOG_NOT_RE1_RE2 0x89 // RA0 RA1 RA2 RA3 RA5 RE0 Ref=Vdd
#define ANALOG_NOT_RE1_RE2_REF_RA3 0x8A // RA0 RA1 RA2 RA5 RE0 Ref=RA3
#define ANALOG_NOT_RE1_RE2_REF_RA3_RA2 0x8B // RA0 RA1 RA5 RE0 Ref=RA2,RA3
#define A_ANALOG_RA3_RA2_REF 0x8C // RA0 RA1 RA5 Ref=RA2,RA3
#define RA0_RA1_ANALOG_RA3_RA2_REF 0x8D // RA0 RA1 Ref=RA2,RA3
#define RA0_ANALOG 0x8E // RA0
#define RA0_ANALOG_RA3_RA2_REF 0x8F // RA0 Ref=RA2,RA3
///////////////////////////////////// Constants used for SETUP_ADC()
#define ADC_OFF 0
#define ADC_CLOCK_DIV_2 1
#define ADC_CLOCK_DIV_8 0x41
#define ADC_CLOCK_DIV_32 0x81
#define ADC_CLOCK_INTERNAL 0xc1
#define ADC_DONE 0x8C40 // Used for ENABLE/DISABLE INTERRUPTS
#define INT_ADC 0x8C40 // Used for ENABLE/DISABLE INTERRUPTS
#define INT_EEPROM 0x8D10 // Used for ENABLE/DISABLE INTERRUPTS
#list
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -