?? mmc.h
字號:
/*************************************************************************** Title: MultiMedia Card low level Functions File: mmc.h Author: Nick Lott Date: September 2004 This file represents a convergence of a number of code snippets found on the web, some of the Yampp system by Jesper Hansen and the work done by Sylvain.Bissonnette@microsyl.com. The goal is to produce an adaptable library for doing low level MMC activities over the SPI bus. This file came about really as Jesper's code had problems when porting to a different AVR. This code was written with the Atmega169V in mind (aka "Butterfly"). For details Concerning the MMC spec see www.sandisk.com. I refered to "SanDisk MultiMediaCard and Reduced-Size MultiMediaCard Product Manual" Doc No. 80-36-00320 v1.0 during the writing of this code. This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.***************************************************************************//***************************************************************************History:24-26 Sep 2004: Initial write and port of functions collected over last few months March 2005: Add improvements based around Circuit cellar article ADD***************************************************************************/// MMC Hardware connections#define MMC_PORT PORTE#define MMC_PIN PINE#define MMC_DDR DDRE#define MMC_CS PE4#define SPI_PORT PORTB#define SPI_DDR DDRB#define SPI_SS PB0#define SPI_SCK PB1#define SPI_MOSI PB2#define SPI_MISO PB3// MMC commands#define MMC_GO_IDLE_STATE 0#define MMC_SEND_OP_COND 1#define MMC_SEND_CSD 9#define MMC_SEND_CID 10#define MMC_SEND_STATUS 13#define MMC_SET_BLOCKLEN 16#define MMC_READ_SINGLE_BLOCK 17#define MMC_WRITE_BLOCK 24#define MMC_PROGRAM_CSD 27#define MMC_SET_WRITE_PROT 28#define MMC_CLR_WRITE_PROT 29#define MMC_SEND_WRITE_PROT 30#define MMC_TAG_SECTOR_START 32#define MMC_TAG_SECTOR_END 33#define MMC_UNTAG_SECTOR 34#define MMC_TAG_ERASE_GROUP_START 35#define MMC_TAG_ERARE_GROUP_END 36#define MMC_UNTAG_ERASE_GROUP 37#define MMC_ERASE 38#define MMC_CRC_ON_OFF 59// R1 Response bit-defines#define MMC_R1_BUSY 0x80#define MMC_R1_PARAMETER 0x40#define MMC_R1_ADDRESS 0x20#define MMC_R1_ERASE_SEQ 0x10#define MMC_R1_COM_CRC 0x08#define MMC_R1_ILLEGAL_COM 0x04#define MMC_R1_ERASE_RESET 0x02#define MMC_R1_IDLE_STATE 0x01// Data Start tokens#define MMC_STARTBLOCK_READ 0xFE#define MMC_STARTBLOCK_WRITE 0xFE#define MMC_STARTBLOCK_MWRITE 0xFC// Data Stop tokens#define MMC_STOPTRAN_WRITE 0xFD// Data Error Token values#define MMC_DE_MASK 0x1F#define MMC_DE_ERROR 0x01#define MMC_DE_CC_ERROR 0x02#define MMC_DE_ECC_FAIL 0x04#define MMC_DE_OUT_OF_RANGE 0x04#define MMC_DE_CARD_LOCKED 0x04// Data Response Token values#define MMC_DR_MASK 0x1F#define MMC_DR_ACCEPT 0x05#define MMC_DR_REJECT_CRC 0x0B#define MMC_DR_REJECT_WRITE_ERROR 0x0D#ifndef MMC_C#include "types.h"extern uint8 mmc_sbuf[];// 512 byte sector buffer in internal RAMextern uint8 mmc_scratch[]; // 32 byte Scratch buffer for CSD/CID/ ops//// Prototypes//void SpiInit(void); // init AVR HWuint8 SpiByte(unsigned char byte); // xmit/recv over SPIuint8 MMC_Reset(void); // init mmcuint16 MMC_Check(void); // check statusuint8 MMC_Read(uint32 lba);uint8 MMC_Write(uint32 lba);uint8 MMC_Identify(void); // get CID datauint8 MMC_CardType(void); // get CSD datauint32 MMC_Capacity(void); // get capacity in Bytesuint8 MMC_Name(void); // get MMC Nameuint8 MMC_WriteProtect(uint8 set);void MMC_Flush(void);BOOL MMC_Detect(void);#endif
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -