/********************************************** vim: set sw=8 ts=8 si :* Author: Guido Socher, Copyright: GPL * This is a lcd test program only* * See http://www.tuxgraphics.org/electronics/* * Chip type           : ATMEGA8* Clock frequency     : Internal clock 4 Mhz *********************************************/#include <avr/io.h>#include <inttypes.h>#include <avr/interrupt.h>#include "lcd.h"void delay_ms(unsigned char ms)/* delay for a minimum of <ms> *//* with a 4Mhz clock */{	uint8_t inner,inner1;    	while (ms) {		inner = 200;		while (inner) {			inner--;			inner1 = 70;			while (inner1) {				inner1--;			}		}		ms--;	}}void main(void){	lcd_init(LCD_DISP_ON);	sei();	while (1) {		lcd_clrscr();		lcd_puts("OK works");		delay_ms(250);	}}