@echo offREM Setup for compiling with Watcom C/C++ 11.0 in 32 bit mode with Phar Lap TNTif .%CHECKED%==.1 goto checked_buildSET LIB=%SCITECH_LIB%\LIB\RELEASE\DOS32\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\DOS;%TNT_PATH%\LIB;.echo Release build enabled.goto setvars:checked_buildSET LIB=%SCITECH_LIB%\LIB\DEBUG\DOS32\WC11;%WC11_PATH%\LIB386;%WC11_PATH%\LIB386\DOS;%TNT_PATH%\LIB;.echo Checked debug build enabled.goto setvars:setvarsSET EDPATH=%WC11_PATH%\EDDATSET INCLUDE=INCLUDE;%SCITECH%\INCLUDE;%PRIVATE%\INCLUDE;%WC11_PATH%\H;%WC11_PATH%\H\NT;%TNT_PATH%\INCLUDESET WATCOM=%WC11_PATH%SET MAKESTARTUP=%SCITECH%\MAKEDEFS\WC32.MKSET USE_TNT=1SET USE_X32=SET USE_X32VM=SET USE_WIN16=SET USE_WIN32=SET USE_WIN386=SET USE_OS216=SET USE_OS232=SET USE_OS2GUI=SET USE_SNAP=SET USE_QNX4=SET WC_LIBBASE=WC11PATH %SCITECH_BIN%;%WC11_PATH%\BINNT;%WC11_PATH%\BINW;%DEFPATH%%WC_CD_PATH%REM If you set the following to a 1, a TNT DosStyle app will be created.REM Otherwise a TNT NtStyle app will be created. NtStyle apps will *only*REM run under real DOS when using our libraries, since we require accessREM to functions that the Win32 API does not support (such as direct accessREM to video memory, calling Int 10h BIOS functions etc). DosStyle appsREM will however run fine in both DOS and a Win95 DOS box (NT DOS boxes don'tREM work too well).REMREM If you are using the RealTime DOS extender, your apps *must* be NtStyle,REM and hence will never be able to run under Win95 or WinNT, only DOS.SET DOSSTYLE=1echo Watcom C/C++ 11.0 32-bit DOS compilation environment set up (TNT).