#ifndef   __USB100_H__
#define   __USB100_H__


#include <PSHPACK1.H>


//bmRequest.Dir
#define BMREQUEST_HOST_TO_DEVICE        0
#define BMREQUEST_DEVICE_TO_HOST        1

//bmRequest.Type
#define BMREQUEST_STANDARD              0
#define BMREQUEST_CLASS                 1
#define BMREQUEST_VENDOR                2

//bmRequest.Recipient
#define BMREQUEST_TO_DEVICE             0
#define BMREQUEST_TO_INTERFACE          1
#define BMREQUEST_TO_ENDPOINT           2
#define BMREQUEST_TO_OTHER              3


#define MAXIMUM_USB_STRING_LENGTH 255

// values for the bits returned by the USB GET_STATUS command
#define USB_GETSTATUS_SELF_POWERED                0x01
#define USB_GETSTATUS_REMOTE_WAKEUP_ENABLED       0x02


#define USB_DEVICE_DESCRIPTOR_TYPE                0x01
#define USB_CONFIGURATION_DESCRIPTOR_TYPE         0x02
#define USB_STRING_DESCRIPTOR_TYPE                0x03
#define USB_INTERFACE_DESCRIPTOR_TYPE             0x04
#define USB_ENDPOINT_DESCRIPTOR_TYPE              0x05

// descriptor types defined by DWG documents
#define USB_RESERVED_DESCRIPTOR_TYPE              0x06
#define USB_CONFIG_POWER_DESCRIPTOR_TYPE          0x07
#define USB_INTERFACE_POWER_DESCRIPTOR_TYPE       0x08

#define USB_DESCRIPTOR_MAKE_TYPE_AND_INDEX(d, i) ((USHORT)((USHORT)d<<8 | i))

//
// Values for bmAttributes field of an
// endpoint descriptor
//

#define USB_ENDPOINT_TYPE_MASK                    0x03

#define USB_ENDPOINT_TYPE_CONTROL                 0x00
#define USB_ENDPOINT_TYPE_ISOCHRONOUS             0x01
#define USB_ENDPOINT_TYPE_BULK                    0x02
#define USB_ENDPOINT_TYPE_INTERRUPT               0x03


//
// definitions for bits in the bmAttributes field of a 
// configuration descriptor.
//
#define USB_CONFIG_POWERED_MASK                   0xc0

#define USB_CONFIG_BUS_POWERED                    0x80
#define USB_CONFIG_SELF_POWERED                   0x40
#define USB_CONFIG_REMOTE_WAKEUP                  0x20

//
// Endpoint direction bit, stored in address
//

#define USB_ENDPOINT_DIRECTION_MASK               0x80

// test direction bit in the bEndpointAddress field of
// an endpoint descriptor.
#define USB_ENDPOINT_DIRECTION_OUT(addr)          (!((addr) & USB_ENDPOINT_DIRECTION_MASK))
#define USB_ENDPOINT_DIRECTION_IN(addr)           ((addr) & USB_ENDPOINT_DIRECTION_MASK)

//
// USB defined request codes
// see chapter 9 of the USB 1.0 specifcation for
// more information.
//

// These are the correct values based on the USB 1.0
// specification

#define USB_REQUEST_GET_STATUS                    0x00
#define USB_REQUEST_CLEAR_FEATURE                 0x01

#define USB_REQUEST_SET_FEATURE                   0x03

#define USB_REQUEST_SET_ADDRESS                   0x05
#define USB_REQUEST_GET_DESCRIPTOR                0x06
#define USB_REQUEST_SET_DESCRIPTOR                0x07
#define USB_REQUEST_GET_CONFIGURATION             0x08
#define USB_REQUEST_SET_CONFIGURATION             0x09
#define USB_REQUEST_GET_INTERFACE                 0x0A
#define USB_REQUEST_SET_INTERFACE                 0x0B
#define USB_REQUEST_SYNC_FRAME                    0x0C


//
// defined USB device classes
//


#define USB_DEVICE_CLASS_RESERVED           0x00
#define USB_DEVICE_CLASS_AUDIO              0x01
#define USB_DEVICE_CLASS_COMMUNICATIONS     0x02
#define USB_DEVICE_CLASS_HUMAN_INTERFACE    0x03
#define USB_DEVICE_CLASS_MONITOR            0x04
#define USB_DEVICE_CLASS_PHYSICAL_INTERFACE 0x05
#define USB_DEVICE_CLASS_POWER              0x06
#define USB_DEVICE_CLASS_PRINTER            0x07
#define USB_DEVICE_CLASS_STORAGE            0x08
#define USB_DEVICE_CLASS_HUB                0x09
#define USB_DEVICE_CLASS_VENDOR_SPECIFIC    0xFF

//
// USB Core defined Feature selectors
//

#define USB_FEATURE_ENDPOINT_STALL          0x0000
#define USB_FEATURE_REMOTE_WAKEUP           0x0001

//
// USB DWG defined Feature selectors
//

#define USB_FEATURE_INTERFACE_POWER_D0      0x0002
#define USB_FEATURE_INTERFACE_POWER_D1      0x0003
#define USB_FEATURE_INTERFACE_POWER_D2      0x0004
#define USB_FEATURE_INTERFACE_POWER_D3      0x0005

typedef struct _USB_DEVICE_DESCRIPTOR {
    UCHAR bLength;
    UCHAR bDescriptorType;
    USHORT bcdUSB;
    UCHAR bDeviceClass;
    UCHAR bDeviceSubClass;
    UCHAR bDeviceProtocol;
    UCHAR bMaxPacketSize0;
    USHORT idVendor;
    USHORT idProduct;
    USHORT bcdDevice;
    UCHAR iManufacturer;
    UCHAR iProduct;
    UCHAR iSerialNumber;
    UCHAR bNumConfigurations;
} USB_DEVICE_DESCRIPTOR, *PUSB_DEVICE_DESCRIPTOR;

typedef struct _USB_ENDPOINT_DESCRIPTOR {
    UCHAR bLength;
    UCHAR bDescriptorType;
    UCHAR bEndpointAddress;
    UCHAR bmAttributes;
    USHORT wMaxPacketSize;
    UCHAR bInterval;
} USB_ENDPOINT_DESCRIPTOR, *PUSB_ENDPOINT_DESCRIPTOR;

typedef struct _USB_CONFIGURATION_DESCRIPTOR {
    UCHAR bLength;
    UCHAR bDescriptorType;
    USHORT wTotalLength;
    UCHAR bNumInterfaces;
    UCHAR bConfigurationValue;
    UCHAR iConfiguration;
    UCHAR bmAttributes;
    UCHAR MaxPower;
} USB_CONFIGURATION_DESCRIPTOR, *PUSB_CONFIGURATION_DESCRIPTOR;

typedef struct _USB_INTERFACE_DESCRIPTOR {
    UCHAR bLength;
    UCHAR bDescriptorType;
    UCHAR bInterfaceNumber;
    UCHAR bAlternateSetting;
    UCHAR bNumEndpoints;
    UCHAR bInterfaceClass;
    UCHAR bInterfaceSubClass;
    UCHAR bInterfaceProtocol;
    UCHAR iInterface;
} USB_INTERFACE_DESCRIPTOR, *PUSB_INTERFACE_DESCRIPTOR;

typedef struct _USB_STRING_DESCRIPTOR {
    UCHAR bLength;
    UCHAR bDescriptorType;
    WCHAR bString[1];
} USB_STRING_DESCRIPTOR, *PUSB_STRING_DESCRIPTOR;

typedef struct _USB_COMMON_DESCRIPTOR {
    UCHAR bLength;
    UCHAR bDescriptorType;
} USB_COMMON_DESCRIPTOR, *PUSB_COMMON_DESCRIPTOR;


//
// Standard USB HUB definitions 
//
// See Chapter 11 USB core specification
//

typedef struct _USB_HUB_DESCRIPTOR {
    UCHAR        bDescriptorLength;      // Length of this descriptor
    UCHAR        bDescriptorType;        // Hub configuration type
    UCHAR        bNumberOfPorts;         // number of ports on this hub
    USHORT       wHubCharacteristics;    // Hub Charateristics
    UCHAR        bPowerOnToPowerGood;    // port power on till power good in 2ms
    UCHAR        bHubControlCurrent;     // max current in mA
    //
    // room for 255 ports power control and removable bitmask
    UCHAR        bRemoveAndPowerMask[64];       
} USB_HUB_DESCRIPTOR, *PUSB_HUB_DESCRIPTOR;


//
// Structures defined by various DWG feature documents
//


//
// See DWG USB Feature Specification: Interface Power Management
//

#define USB_SUPPORT_D0_COMMAND      0x01
#define USB_SUPPORT_D1_COMMAND      0x02
#define USB_SUPPORT_D2_COMMAND      0x04
#define USB_SUPPORT_D3_COMMAND      0x08

#define USB_SUPPORT_D1_WAKEUP       0x10
#define USB_SUPPORT_D2_WAKEUP       0x20


typedef struct _USB_CONFIGURATION_POWER_DESCRIPTOR {
    UCHAR bLength;
    UCHAR bDescriptorType;
    UCHAR SelfPowerConsumedD0[3];
    UCHAR bPowerSummaryId;
    UCHAR bBusPowerSavingD1;
    UCHAR bSelfPowerSavingD1;
    UCHAR bBusPowerSavingD2;
    UCHAR bSelfPowerSavingD2; 
    UCHAR bBusPowerSavingD3;
    UCHAR bSelfPowerSavingD3; 
    USHORT TransitionTimeFromD1;
    USHORT TransitionTimeFromD2;
    USHORT TransitionTimeFromD3;
} USB_CONFIGURATION_POWER_DESCRIPTOR, *PUSB_CONFIGURATION_POWER_DESCRIPTOR;


typedef struct _USB_INTERFACE_POWER_DESCRIPTOR {
    UCHAR bLength;
    UCHAR bDescriptorType;
    UCHAR bmCapabilitiesFlags;
    UCHAR bBusPowerSavingD1;
    UCHAR bSelfPowerSavingD1;
    UCHAR bBusPowerSavingD2;
    UCHAR bSelfPowerSavingD2; 
    UCHAR bBusPowerSavingD3;
    UCHAR bSelfPowerSavingD3; 
    USHORT TransitionTimeFromD1;
    USHORT TransitionTimeFromD2;
    USHORT TransitionTimeFromD3;
} USB_INTERFACE_POWER_DESCRIPTOR, *PUSB_INTERFACE_POWER_DESCRIPTOR;


#include <POPPACK.H>


#endif   /* __USB100_H__ */