;
;VAG-COM Measuring Blocks label file for 2,6 litre V6 engine, engine code ABC.
;Control Module Part Number: 4A0-907-473xx
;
;Created by Mikael "Knappen" Therell (en_knapp@home.se)
;
;Feel free to modify and send modifications to Ross-Tech.
;
;Last modified by Knappen on Febuary 21, 2004.
;
;Group A0 does not show in adaption but is implemented for completeness and possible future use.
;
A0,0,Idling speed stabilisation valve and learned mixture values
A0,5,Moves the idling speed stabilisation valve to it's basic position and resets learned mixture values to factory default.
A0,6,The idling speed stabilisation valve -N71 must be moved to it's basic position if:
A0,7,The -N71 connector has been removed with engine running.
A0,8,The -N71 has been removed and installed or replaced.
A0,9,The engine control unit has been removed and installed or replaced.
A0,10,The intake manifold has been removed and installed or replaced.
A0,11,The engine has been removed and installed or replaced.
A0,12,
A0,13,Save 00 to adapt and reset.
A0,14,
A0,15,Idling speed stabilisation valve adaption only can be performed in Basic settings block 001.
A0,16,Learned mixture values reset only can be performed in Basic settings block 002.
A0,17,Basic settings can only be performed from software version DO3 and above in ECU version A.
;
A1,0,Idling speed adaption
A1,5,Idling speed adaption
A1,6,Adaption value 0 is factory set idling speed.
A1,7,Adaption is 10 rpm per step.
A1,8,+10 rpm enter 00001. +20 rpm enter 00002.  Works up to +70 rpm or 00007.
A1,9,-10 rpm enter 00255. -20 rpm enter 00254. Works down to -70 rpm or 00249.
;
C0,Coding engine ABC and ACZ
C1,There's different codings for indexes up to "C" and from "D" and onwards
C2,
C3,Number of Lambda probes - Type of Gearbox - Type of drive - Coding up to "C" - Coding from "D" and up
C4,              2                           -   Manual 012      -      FWD         -          000            -            00060
C5,              2                           -   Manual 01A      -      4WD         -          001            -            00061
C6,              2                           -   Auto   01F        -      4WD         -          008            -            00068
C7,              2                           -   Auto   01K        -      FWD         -          008            -            00068
C8,              1                           -   Manual 012      -      FWD         -          032            -            00032
C9,              1                           -   Manual 01A      -      4WD         -          033            -            00033
C10,              1                           -   Auto   01F        -      4WD         -          040            -            00040
C11,              1                           -   Auto   01K        -      FWD         -          040            -            00040
;
0,0,Group 000 explanations not found in ErWin.
0,1,Explanations not found in ErWin.
0,2,Explanations not found in ErWin.
0,3,Explanations not found in ErWin.
0,4,Explanations not found in ErWin.
0,5,Explanations not found in ErWin.
0,6,Explanations not found in ErWin.
0,7,Explanations not found in ErWin.
0,8,Explanations not found in ErWin.
0,9,Explanations not found in ErWin.
0,10,Explanations not found in ErWin.
;
1,0,Idling control (Basic settings-Idling stabilisation valve to default)
1,1,Engine speed,,680 rpm-820 rpm at idling
1,2,Intake manifold,pressure,29-59% OK at idling (100%=1022hPa - 32%=327hPa)
1,3,Ignition timing,,Ignition firing point
1,4,Position of idling,stabilisation valve,18-75 OK at idling
;
2,0,Open throttle control (Basic settings-Resets learned mixture values)
2,1,Throttle valve,angle,Idling: 0% - Full load: 95%
2,2,Intake manifold,pressure,100%=1022hPa - 32%=327hPa
2,3,Coolant,temperature,81-111癈 when warmed up
2,4,Intake air,temperature,Depends on ambient temperature
;
3,0,Lambda control (Basic settings-Ignition timing angle 0.0