/* * devices.c * (C) Copyright 1999 Randy Dunlap. * (C) Copyright 1999,2000 Thomas Sailer <sailer@ife.ee.ethz.ch>. (proc file per device) * (C) Copyright 1999 Deti Fliegl (new USB architecture) * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by * the Free Software Foundation; either version 2 of the License, or * (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA * ************************************************************* * * <mountpoint>/devices contains USB topology, device, config, class, * interface, & endpoint data. * * I considered using /proc/bus/usb/devices/device# for each device * as it is attached or detached, but I didn't like this for some * reason -- maybe it's just too deep of a directory structure. * I also don't like looking in multiple places to gather and view * the data.  Having only one file for ./devices also prevents race * conditions that could arise if a program was reading device info * for devices that are being removed (unplugged).  (That is, the * program may find a directory for devnum_12 then try to open it, * but it was just unplugged, so the directory is now deleted. * But programs would just have to be prepared for situations like * this in any plug-and-play environment.) * * 1999-12-16: Thomas Sailer <sailer@ife.ee.ethz.ch> *   Converted the whole proc stuff to real *   read methods. Now not the whole device list needs to fit *   into one page, only the device list for one bus. *   Added a poll method to /proc/bus/usb/devices, to wake *   up an eventual usbd * 2000-01-04: Thomas Sailer <sailer@ife.ee.ethz.ch> *   Turned into its own filesystem * 2000-07-05: Ashley Montanaro <ashley@compsoc.man.ac.uk> *   Converted file reading routine to dump to buffer once *   per device, not per bus * * $Id: devices.c,v 1.5 2000/01/11 13:58:21 tom Exp $ */#include <linux/fs.h>#include <linux/mm.h>#include <linux/slab.h>#include <linux/poll.h>#include <linux/usb.h>#include <linux/smp_lock.h>#include <linux/usbdevice_fs.h>#include <asm/uaccess.h>#include "hcd.h"#define MAX_TOPO_LEVEL		6/* Define ALLOW_SERIAL_NUMBER if you want to see the serial number of devices */#define ALLOW_SERIAL_NUMBERstatic char *format_topo =/* T:  Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=ddd MxCh=dd */"\nT:  Bus=%2.2d Lev=%2.2d Prnt=%2.2d Port=%2.2d Cnt=%2.2d Dev#=%3d Spd=%3s MxCh=%2d\n";static char *format_string_manufacturer =/* S:  Manufacturer=xxxx */  "S:  Manufacturer=%.100s\n";static char *format_string_product =/* S:  Product=xxxx */  "S:  Product=%.100s\n";#ifdef ALLOW_SERIAL_NUMBERstatic char *format_string_serialnumber =/* S:  SerialNumber=xxxx */  "S:  SerialNumber=%.100s\n";#endifstatic char *format_bandwidth =/* B:  Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd */  "B:  Alloc=%3d/%3d us (%2d%%), #Int=%3d, #Iso=%3d\n";  static char *format_device1 =/* D:  Ver=xx.xx Cls=xx(sssss) Sub=xx Prot=xx MxPS=dd #Cfgs=dd */  "D:  Ver=%2x.%02x Cls=%02x(%-5s) Sub=%02x Prot=%02x MxPS=%2d #Cfgs=%3d\n";static char *format_device2 =/* P:  Vendor=xxxx ProdID=xxxx Rev=xx.xx */  "P:  Vendor=%04x ProdID=%04x Rev=%2x.%02x\n";static char *format_config =/* C:  #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA */  "C:%c #Ifs=%2d Cfg#=%2d Atr=%02x MxPwr=%3dmA\n";  static char *format_iface =/* I:  If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=xxxx*/  "I:  If#=%2d Alt=%2d #EPs=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x Driver=%s\n";static char *format_endpt =/* E:  Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=D?s */  "E:  Ad=%02x(%c) Atr=%02x(%-4s) MxPS=%4d Ivl=%d%cs\n";/* * Need access to the driver and USB bus lists. * extern struct list_head usb_bus_list; * However, these will come from functions that return ptrs to each of them. */static DECLARE_WAIT_QUEUE_HEAD(deviceconndiscwq);static unsigned int conndiscevcnt = 0;/* this struct stores the poll state for <mountpoint>/devices pollers */struct usb_device_status {	unsigned int lastev;};struct class_info {	int class;	char *class_name;};static const struct class_info clas_info[] ={					/* max. 5 chars. per name string */	{USB_CLASS_PER_INTERFACE,	">ifc"},	{USB_CLASS_AUDIO,		"audio"},	{USB_CLASS_COMM,		"comm."},	{USB_CLASS_HID,			"HID"},	{USB_CLASS_HUB,			"hub"},	{USB_CLASS_PHYSICAL,		"PID"},	{USB_CLASS_PRINTER,		"print"},	{USB_CLASS_MASS_STORAGE,	"stor."},	{USB_CLASS_CDC_DATA,		"data"},	{USB_CLASS_APP_SPEC,		"app."},	{USB_CLASS_VENDOR_SPEC,		"vend."},	{USB_CLASS_STILL_IMAGE,		"still"},	{USB_CLASS_CSCID,		"scard"},	{USB_CLASS_CONTENT_SEC,		"c-sec"},	{-1,				"unk."}		/* leave as last */};/*****************************************************************/void usbdevfs_conn_disc_event(void){	conndiscevcnt++;	wake_up(&deviceconndiscwq);}static const char *class_decode(const int class){	int ix;	for (ix = 0; clas_info[ix].class != -1; ix++)		if (clas_info[ix].class == class)			break;	return (clas_info[ix].class_name);}static char *usb_dump_endpoint_descriptor (	int speed,	char *start,	char *end,	const struct usb_endpoint_descriptor *desc){	char dir, unit, *type;	unsigned interval, in, bandwidth = 1;	if (start > end)		return start;	in = (desc->bEndpointAddress & USB_DIR_IN);	dir = in ? 'I' : 'O';	if (speed == USB_SPEED_HIGH) {		switch (desc->wMaxPacketSize & (0x03 << 11)) {		case 1 << 11:	bandwidth = 2; break;		case 2 << 11:	bandwidth = 3; break;		}	}	/* this isn't checking for illegal values */	switch (desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) {	case USB_ENDPOINT_XFER_CONTROL:		type = "Ctrl";		if (speed == USB_SPEED_HIGH) 	/* uframes per NAK */			interval = desc->bInterval;		else			interval = 0;		dir = 'B';			/* ctrl is bidirectional */		break;	case USB_ENDPOINT_XFER_ISOC:		type = "Isoc";		interval = 1 << (desc->bInterval - 1);		break;	case USB_ENDPOINT_XFER_BULK:		type = "Bulk";		if (speed == USB_SPEED_HIGH && !in)	/* uframes per NAK */			interval = desc->bInterval;		else			interval = 0;		break;	case USB_ENDPOINT_XFER_INT:		type = "Int.";		if (speed == USB_SPEED_HIGH) {			interval = 1 << (desc->bInterval - 1);		} else			interval = desc->bInterval;		break;	default:	/* "can't happen" */		return start;	}	interval *= (speed == USB_SPEED_HIGH) ? 125 : 1000;	if (interval % 1000)		unit = 'u';	else {		unit = 'm';		interval /= 1000;	}	start += sprintf(start, format_endpt, desc->bEndpointAddress, dir,			 desc->bmAttributes, type,			 (desc->wMaxPacketSize & 0x07ff) * bandwidth,			 interval, unit);	return start;}static char *usb_dump_interface_descriptor(char *start, char *end,	const struct usb_interface_cache *intfc,	const struct usb_interface *iface,	int setno){	const struct usb_interface_descriptor *desc = &intfc->altsetting[setno].desc;	char *driver_name = "";	if (start > end)		return start;	down_read(&usb_bus_type.subsys.rwsem);	if (iface)		driver_name = (iface->dev.driver				? iface->dev.driver->name				: "(none)");	start += sprintf(start, format_iface,			 desc->bInterfaceNumber,			 desc->bAlternateSetting,			 desc->bNumEndpoints,			 desc->bInterfaceClass,			 class_decode(desc->bInterfaceClass),			 desc->bInterfaceSubClass,			 desc->bInterfaceProtocol,			 driver_name);	up_read(&usb_bus_type.subsys.rwsem);	return start;}static char *usb_dump_interface(	int speed,	char *start,	char *end,	const struct usb_interface_cache *intfc,	const struct usb_interface *iface,	int setno) {	const struct usb_host_interface *desc = &intfc->altsetting[setno];	int i;	start = usb_dump_interface_descriptor(start, end, intfc, iface, setno);	for (i = 0; i < desc->desc.bNumEndpoints; i++) {		if (start > end)			return start;		start = usb_dump_endpoint_descriptor(speed,				start, end, &desc->endpoint[i].desc);	}	return start;}/* TBD: * 0. TBDs * 1. marking active interface altsettings (code lists all, but should mark *    which ones are active, if any) */static char *usb_dump_config_descriptor(char *start, char *end, const struct usb_config_descriptor *desc, int active){	if (start > end)		return start;	start += sprintf(start, format_config,			 active ? '*' : ' ',	/* mark active/actual/current cfg. */			 desc->bNumInterfaces,			 desc->bConfigurationValue,			 desc->bmAttributes,			 desc->bMaxPower * 2);	return start;}static char *usb_dump_config (	int speed,	char *start,	char *end,	const struct usb_host_config *config,	int active){	int i, j;	struct usb_interface_cache *intfc;	struct usb_interface *interface;	if (start > end)		return start;	if (!config)		/* getting these some in 2.3.7; none in 2.3.6 */		return start + sprintf(start, "(null Cfg. desc.)\n");	start = usb_dump_config_descriptor(start, end, &config->desc, active);	for (i = 0; i < config->desc.bNumInterfaces; i++) {		intfc = config->intf_cache[i];		interface = config->interface[i];		for (j = 0; j < intfc->num_altsetting; j++) {			if (start > end)				return start;			start = usb_dump_interface(speed,				start, end, intfc, interface, j);		}	}	return start;}/* * Dump the different USB descriptors. */static char *usb_dump_device_descriptor(char *start, char *end, const struct usb_device_descriptor *desc){	if (start > end)		return start;	start += sprintf (start, format_device1,			  desc->bcdUSB >> 8, desc->bcdUSB & 0xff,			  desc->bDeviceClass,			  class_decode (desc->bDeviceClass),			  desc->bDeviceSubClass,			  desc->bDeviceProtocol,			  desc->bMaxPacketSize0,