?? cs8900.c
字號:
/****************************************************************************
【文 件 名 稱】CS8900.C
【功 能 描 述】CS8900網口驅動程序代碼
【程 序 版 本】4.0
【創建人及創建日期】龔俊//2002年11月19日19:26
【修改人及修改日期】龔俊//2004-12-8 17:25
****************************************************************************/
//***************************************************************************
#include "def.h"
#include "44b.h"
#include "utils.h"
#include "Emac.h"
#include "eth.h"
#include "mac.h"
#include "CS8900.h"
#define IO_BASE_ADDR ( 0x6000000 )
static U8 EmacAddr[ETH_ALEN] = {0x00,0x80,0x48,0x12,0x34,0x56};
//static U8 DstMacID[ETH_ALEN];
#define IOREAD(o) ( *( (volatile U16 *)(dwEthernetIOBase + (o)) ) )
#define IOWRITE(o, d) *((volatile U16 *)(dwEthernetIOBase + (o))) = (U16)(d)
#define MEMREAD(o) ( *((volatile U16 *)(dwEthernetMemBase + (o))))
#define MEMWRITE(o, d) *((volatile U16 *)(dwEthernetMemBase + (o))) = (U16)(d)
//#define DEBUG_CS8900
#ifdef DEBUG_CS8900
#define DBGMSG printf
#else
#define DBGMSG(...)
#endif
#define MAX_COUNT 0x100000
static U32 dwEthernetIOBase;
static U32 dwEthernetMemBase;
//#define CS8900_MEM_MODE
#ifdef CS8900_MEM_MODE
#define READ_REG1 ReadReg
#define READ_REG2 MEMREAD
#define WRITE_REG1 WriteReg
#define WRITE_REG2 MEMWRITE
#else
#define READ_REG1 ReadReg
#define READ_REG2 ReadReg
#define WRITE_REG1 WriteReg
#define WRITE_REG2 WriteReg
#endif
static int bIsPacket;
static U16 ReadReg(U16 offset)
{
IOWRITE(IO_PACKET_PAGE_POINTER, offset);
return IOREAD(IO_PACKET_PAGE_DATA_0);
}
static void WriteReg(U16 offset, U16 data)
{
IOWRITE(IO_PACKET_PAGE_POINTER, offset);
IOWRITE(IO_PACKET_PAGE_DATA_0 , data);
}
static int CS8900_Probe(int iobase, int membase)
{
int r = FALSE;
U16 sig=0;
DBGMSG("CS8900 CS8900_Probe\n");
dwEthernetIOBase = iobase;
dwEthernetMemBase = membase;
do
{
sig = IOREAD(IO_PACKET_PAGE_POINTER);
if ( (sig & CS8900_SIGMSK) != CS8900_SIGNATURE )
{
DBGMSG("Signature Error\n");
DBGMSG("Signature Read = 0x%04x\n", sig);
break;
}
/* Check the EISA registration number. */
sig = READ_REG1(PKTPG_EISA_NUMBER);
if (sig != CS8900_EISA_NUMBER)
{
DBGMSG("EISA Number Error\n");
DBGMSG("EISA Number Read = 0x%04x\n", sig);
break;
}
/* Check the Product ID. */
sig = READ_REG1(PKTPG_PRDCT_ID_CODE);
if ((sig & CS8900_PRDCT_ID_MASK) != CS8900_PRDCT_ID )
{
DBGMSG("Product ID Error\n");
DBGMSG("Product ID Read = 0x%04x\n", sig);
break;
}
DBGMSG("CS8900 is Detected!\n");
r = TRUE;
} while (0);
return r;
}
static int CS8900_Reset(void)
{
int r = FALSE;
U16 dummy;
int i;
/* Set RESET bit of SelfCTL register. */
do
{
WRITE_REG1(PKTPG_SELF_CTL, SELF_CTL_RESET | SELF_CTL_LOW_BITS);
/* Wait until INITD bit of SelfST register is set. */
for (i = 0; i < MAX_COUNT; i++)
{
dummy = READ_REG1(PKTPG_SELF_ST);
if (dummy & SELF_ST_INITD) break;
}
if (i >= MAX_COUNT)
{
DBGMSG("Reset failed (SelfST) \n");
break;
}
/* Wait until SIBUSY bit of SelfST register is cleared. */
for (i = 0; i < MAX_COUNT; i++)
{
dummy = READ_REG1(PKTPG_SELF_ST);
if ((dummy & SELF_ST_SIBUSY) == 0) break;
}
if (i >= MAX_COUNT)
{
DBGMSG("Reset failed (SIBUSY) \n");
break;
}
r = TRUE;
DBGMSG("Reset Success!!\n");
} while (0);
return r;
}
static void EnableIRQ(void)
{
U16 temp;
/* If INTERRUPT_NUMBER is 0, */
/* Interrupt request will be generated from INTRQ0 pin */
WRITE_REG2(PKTPG_INTERRUPT_NUMBER, INTERRUPT_NUMBER);
temp = READ_REG2(PKTPG_BUS_CTL) | BUS_CTL_ENABLE_IRQ;
WRITE_REG2(PKTPG_BUS_CTL, temp);
temp = READ_REG2(PKTPG_LINE_CTL) | LINE_CTL_RX_ON | LINE_CTL_TX_ON;
WRITE_REG2(PKTPG_LINE_CTL,temp);
}
static int Init(U16 *mac)
{
U16 temp;
#ifdef CS8900_MEM_MODE
WRITE_REG1(PKTPG_MEMORY_BASE_ADDR , (U16)(dwEthernetMemBase & 0xffff));
WRITE_REG1(PKTPG_MEMORY_BASE_ADDR + 2 , (U16)(dwEthernetMemBase >> 16 ));
WRITE_REG1(PKTPG_BUS_CTL , BUS_CTL_MEMORY_E | BUS_CTL_LOW_BITS);
#endif
temp = READ_REG2(PKTPG_LINE_CTL) | LINE_CTL_10_BASE_T | LINE_CTL_MOD_BACKOFF;
WRITE_REG2( PKTPG_LINE_CTL, temp);
WRITE_REG2(PKTPG_RX_CFG, RX_CFG_RX_OK_I_E | RX_CFG_LOW_BITS);
WRITE_REG2(PKTPG_RX_CTL,
RX_CTL_RX_OK_A | RX_CTL_IND_ADDR_A | RX_CTL_BROADCAST_A | RX_CTL_LOW_BITS);
WRITE_REG2(PKTPG_INDIVISUAL_ADDR + 0, *mac++);
WRITE_REG2(PKTPG_INDIVISUAL_ADDR + 2, *mac++);
WRITE_REG2(PKTPG_INDIVISUAL_ADDR + 4, *mac );
WRITE_REG2(PKTPG_TX_CFG, TX_CFG_LOW_BITS);
EnableIRQ();
DBGMSG("CS8900_Init OK.\n");
return TRUE;
}
static int RcvPkt(char *pbData, int dwLength)
{
/* use int rather than short for the reason of performance */
int length;
int rlen = 0;
U16 *bp;
U16 data;
/* Discard RxStatus */
data = IOREAD(IO_RX_TX_DATA_0);
/* Read the frame's length. */
length = IOREAD(IO_RX_TX_DATA_0);
if (length > dwLength) length = 0;
bp = (U16 *)pbData;
rlen = length;
while (rlen)
{
data = IOREAD(IO_RX_TX_DATA_0);
if (rlen == 1)
{
*((char *)bp) = (char)data;
rlen--;
}
else
{
*bp++ = data;
rlen -= 2;
}
}
return length;
}
static U16 TransmitPkt(char *pbData, U16 slen)
{
U16 * bp;
U16 data;
int i;
/* Send Command */
IOWRITE(IO_TX_CMD, TX_CMD_START_ALL | TX_CMD_LOW_BITS);
IOWRITE(IO_TX_LENGTH, slen);
/* Wait */
for (i = 0; i < MAX_COUNT; i++)
{
data = READ_REG2(PKTPG_BUS_ST);
if (data & BUS_ST_RDY_4_TX_NOW) break;
}
if (i >= MAX_COUNT) return 1;
bp = (U16 *)pbData;
while (slen)
{
IOWRITE(IO_RX_TX_DATA_0, *bp++);
slen--;
if (slen) slen--;
}
return 0;
}
/****************************************************************************
【功能說明】Received Packet
****************************************************************************/
int CS8900DBG_IsReceivedPacket(void)
{
U16 event;
int r = FALSE;
event = IOREAD(IO_ISQ);
// DBGMSG("%x\n", event);
if ( ((event & ISQ_REG_NUM ) == REG_NUM_RX_EVENT ) &&
((event & RX_EVENT_RX_OK) == RX_EVENT_RX_OK ) &&
((event & RX_EVENT_IND_ADDR) | (event & RX_CTL_BROADCAST_A)))
{
r = bIsPacket = TRUE;
// DBGMSG("%x\n", event);
}
else
bIsPacket = FALSE;
return r;
}
/****************************************************************************
【功能說明】CS8900 initial
****************************************************************************/
int board_eth_init(void)
{
int r;
bIsPacket = FALSE;
DBGMSG("CS8900_Initial\n");
DBGMSG("CS8900 Mac Address: %x:%x:%x:%x:%x:%x\r\n",
EmacAddr[0], EmacAddr[1],
EmacAddr[2], EmacAddr[3],
EmacAddr[4], EmacAddr[5]);
r = -1;
do {
if (!CS8900_Probe(IO_BASE_ADDR, 0)) break;
if (!CS8900_Reset()) break;
if (!Init((U16 *)EmacAddr)) break;
r = 0;
} while (0);
return r;
}
/****************************************************************************
【功能說明】返回聯接狀態
****************************************************************************/
int board_eth_lnk_stat(void)
{
return 0;
}
/****************************************************************************
【功能說明】發送數據
****************************************************************************/
int board_eth_send(unsigned char *data, unsigned int len)
{
return TransmitPkt((char *)data, len);
}
/****************************************************************************
【功能說明】接收數據
****************************************************************************/
int board_eth_rcv(unsigned char *data, unsigned int *len)
{
int r = -1;
if(CS8900DBG_IsReceivedPacket()) {
U16 size;
bIsPacket = FALSE;
// DBGMSG("%x,", IOREAD(IO_RX_TX_DATA_0));
// DBGMSG("%x,", IOREAD(IO_RX_TX_DATA_0));
size = RcvPkt((char *)data, 1532);
*len = size;
// DBGMSG("received date %d\n", size);
// RcvPkt((char *)data, size);
r = 0;
}
return r;
}
/****************************************************************************
【功能說明】獲取網口地址
****************************************************************************/
int board_eth_get_addr(unsigned char *addr)
{
memcpy(addr, EmacAddr, ETH_ALEN);
return 0;
}
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -