#define ROOT_STACK_SIZE         10000   /* size of root's stack, in bytes */#define SHELL_STACK_SIZE        10000   /* size of shell's stack, in bytes */#define WDB_STACK_SIZE	 	0x1000	/* size of WDB agents stack, in bytes */#define ISR_STACK_SIZE          1000    /* size of ISR stack, in bytes */#define TRAP_DEBUG              0       /* not used */#define VEC_BASE_ADRS           ((char *) LOCAL_MEM_LOCAL_ADRS)#endif  /* CPU_FAMILY==I80X86 */#if	CPU_FAMILY==AM29XXX#define INT_LOCK_LEVEL  	0x0001	/* 29k all interrupts disable mask */#define ROOT_STACK_SIZE		10000	/* size of root's stack, in bytes */#define SHELL_STACK_SIZE	40000	/* size of shell's stack, in bytes */#define WDB_STACK_SIZE	 	0x2000	/* size of WDB agents stack, in bytes */#define ISR_STACK_SIZE		10000	/* size of ISR stack, in bytes */#define TRAP_DEBUG		15	/* trap 2 - breakpoint trap */#define VEC_BASE_ADRS           ((char *) LOCAL_MEM_LOCAL_ADRS)#endif	/* CPU_FAMILY==AM29XXX */#if	CPU_FAMILY==SH#define	INT_LOCK_LEVEL		15#define	ROOT_STACK_SIZE		10000#define	SHELL_STACK_SIZE	10000	/* size of shell's stack, in bytes */#define WDB_STACK_SIZE	 	0x1000	/* size of WDB agents stack, in bytes */#define	ISR_STACK_SIZE		1000#define	VEC_BASE_ADRS		((char *) LOCAL_MEM_LOCAL_ADRS)#endif	/* CPU_FAMILY==SH */#if     CPU_FAMILY==ARM#define INT_LOCK_LEVEL          0       /* interrupt disable mask - unused */#define ROOT_STACK_SIZE         0x4000  /* size of root's stack, in bytes */#define SHELL_STACK_SIZE        0x10000 /* size of shell's stack, in bytes */#define WDB_STACK_SIZE          0x2000  /* size of WDB agents stack, in bytes */#define TRAP_DEBUG              0       /* not used */#define VEC_BASE_ADRS           ((char *) LOCAL_MEM_LOCAL_ADRS)/* * NOTE: ISR_STACK_SIZE defined in config.h, not here - BSP interrupt * 	 structure dependent */#endif  /* CPU_FAMILY==ARM */#ifndef BOOT_CMD_STACK_SIZE#define BOOT_CMD_STACK_SIZE	7000#endif  /* BOOT_CMD_STACK_SIZE *//* WDB debug agent configuration */#ifdef  INCLUDE_WDB/* optional agent facilities */#define INCLUDE_WDB_BANNER		/* print banner after agent starts */#define INCLUDE_WDB_VIO			/* virtual I/O support */#define	INCLUDE_WDB_TTY_TEST		/* test serial line communcation */#define INCLUDE_WDB_START_NOTIFY	/* notify the host of task creation */#define INCLUDE_WDB_USER_EVENT		/* user events handling *//* core agent facilities - do not remove */#define INCLUDE_WDB_CTXT		/* context control */#define INCLUDE_WDB_FUNC_CALL		/* spawn function as separate task */#define INCLUDE_WDB_DIRECT_CALL		/* call function in agents context */#define INCLUDE_WDB_EVENTS		/* host async event notification */#define INCLUDE_WDB_GOPHER		/* gopher info gathering */#define INCLUDE_WDB_BP			/* breakpoint support */#define INCLUDE_WDB_EXC_NOTIFY		/* notify host of exceptions */#define INCLUDE_WDB_EXIT_NOTIFY		/* notify the host of task exit */#define INCLUDE_WDB_REG			/* get/set hardware registers */#define INCLUDE_WDB_EVENTPOINTS		/* eventpoints handling */#define INCLUDE_WDB_MEM			/* optional memory services *//* agent mode */#define WDB_MODE        WDB_MODE_DUAL	/* WDB_MODE_[DUAL|TASK|EXTERN] *//* agent communication paths */#define WDB_COMM_NETWORK 	0	/* vxWorks network	- task mode */#define WDB_COMM_SERIAL		1	/* raw serial		- bimodal   */#define WDB_COMM_TYCODRV_5_2	2	/* older serial driver	- task mode */#define WDB_COMM_ULIP		3	/* vxSim packet device	- bimodal   */#define WDB_COMM_NETROM		4	/* netrom packet device	- bimodal   */#define WDB_COMM_CUSTOM		5	/* custom packet device	- bimodal   */#define WDB_COMM_END		6	/* END packet device 	- bimodal */#define WDB_COMM_PIPE           7       /* vxSim pipe device    - bimodal   */#define WDB_COMM_VTMD           8       /* TMD packet device    - bimodal   *//* communication path configuration */#ifndef WDB_COMM_TYPE#define WDB_COMM_TYPE WDB_COMM_END	/* default path is the network */#endif#ifndef WDB_TTY_CHANNEL#define WDB_TTY_CHANNEL		1	/* default Sio SERIAL channel */#endif#ifndef WDB_TTY_DEV_NAME#define WDB_TTY_DEV_NAME    "/tyCo/1"	/* default TYCODRV_5_2 device name */#endif#ifndef WDB_TTY_BAUD#define WDB_TTY_BAUD		9600	/* default baud rate */#endif#ifndef WDB_ULIP_DEV#define WDB_ULIP_DEV    "/dev/ulip14"	/* default ULIP packet device */#endif#define	WDB_NETROM_TYPE		400	/* default is old 400 series */#define	WDB_NETROM_WIDTH	1	/* width of a ROM word. This macro					 * is not used for the 500 series. */#define WDB_NETROM_INDEX	0	/* index into word of pod zero */#define	WDB_NETROM_NUM_ACCESS	1	/* of pod zero per byte read */#define	WDB_NETROM_ROMSIZE	ROM_SIZE /* size of a single ROM. If your					 * board has N ROMs, this definition					 * must be divided by N to be right */#define WDB_NETROM_POLL_DELAY	2	/* # clock ticks to poll for input *//* miscelaneous agent constants */#define WDB_MTU         	1500	/* max RPC message size */#define WDB_POOL_SIZE 		((sysMemTop() - FREE_RAM_ADRS)/16) /* memory pool for host tools */#define WDB_SPAWN_STACK_SIZE	0x5000	/* default stack size of spawned task */#endif  /* INCLUDE_WDB *//******************************************************************************//*                                                                            *//*                   "GENERIC" BOARD CONFIGURATION                            *//*                                                                            *//******************************************************************************//* device controller I/O addresses when included */#define IO_ADRS_EI      ((char *) 0x000fff00)   /* 32A,32D i82596CA Ethernet *//******************************************************************************//*                                                                            *//*                   "MISCELLANEOUS" CONSTANTS                                *//*                                                                            *//******************************************************************************//* shared memory objects parameters (unbundled) */#define SM_OBJ_MAX_TASK		40	/* max # of tasks using smObj */#define SM_OBJ_MAX_SEM		60	/* max # of shared semaphores */#define SM_OBJ_MAX_MSG_Q	10	/* max # of shared message queues */#define SM_OBJ_MAX_MEM_PART	4	/* max # of shared memory partitions */#define SM_OBJ_MAX_NAME		100	/* max # of shared objects names */#define SM_OBJ_MAX_TRIES	5000	/* max # of tries to obtain lock *//* shared memory network parameters  - defaults to values DEFAULT_PKTS_SIZE * and DEFAULT_CPUS_MAX in smPktLib.h respectively */#define SM_PKTS_SIZE            0       /* shared memory packet size */#define SM_CPUS_MAX             0       /* max # of cpus for shared network *//* low memory layout */#if     (CPU_FAMILY == I80X86)#define GDT_BASE_OFFSET         0x800#define SM_ANCHOR_OFFSET        0x1100#define BOOT_LINE_OFFSET        0x1200#define EXC_MSG_OFFSET          0x1300#elif   (CPU_FAMILY == PPC)#define SM_ANCHOR_OFFSET        0x4100#define BOOT_LINE_OFFSET        0x4200#define EXC_MSG_OFFSET          0x4300#elif	(CPU==SH7750 || CPU==SH7729 || CPU==SH7700)#define SM_ANCHOR_OFFSET        0x1600	/* not used for SDRAM config. */#define BOOT_LINE_OFFSET        0x1700#define EXC_MSG_OFFSET          0x1800#else#define SM_ANCHOR_OFFSET        0x600#define BOOT_LINE_OFFSET        0x700#define EXC_MSG_OFFSET          0x800#endif  /* (CPU_FAMILY == I80X86) *//* The backplane driver onboard anchor at the following address */#define SM_ANCHOR_ADRS	((char *) (LOCAL_MEM_LOCAL_ADRS+SM_ANCHOR_OFFSET))/* The bootroms put the boot line at the following address */#define BOOT_LINE_ADRS	((char *) (LOCAL_MEM_LOCAL_ADRS+BOOT_LINE_OFFSET))#define	BOOT_LINE_SIZE	255	/* use 255 bytes for bootline *//* The boot line is stored in non-volatile RAM at the following offset */#define	NV_BOOT_OFFSET	0	/* store the boot line at start of NVRAM *//* Messages from exceptions during exceptions go at the following address */#define EXC_MSG_ADRS	((char *) (LOCAL_MEM_LOCAL_ADRS+EXC_MSG_OFFSET))/* Backplane H/W support */#define	SM_TAS_TYPE	SM_TAS_HARD	/* hardware supports test-and-set *//* Resident ROMs constants */#if     ((CPU_FAMILY==I960) || (CPU_FAMILY==ARM))#define STACK_SAVE      512     	/* maximum stack used to preserve */#else	/* sparc or others */#if	((CPU_FAMILY==SPARC) || (CPU_FAMILY==PPC))#define	STACK_SAVE	0x1000#else	/* all other architecutes */#define STACK_SAVE      0x40    	/* maximum stack used to preserve */#endif					/* mips cpp no elif */#endif#if     (CPU_FAMILY==SPARC)#define RESERVED        0x2000		/* vector table base plus table size */#else	/* 68000 or others */#if	(CPU==MC68000)#define RESERVED	0x400		/* avoid zeroing MC68302 vector table */#else#if	(CPU_FAMILY == PPC)#define RESERVED	0x4400		/* avoid zeroing EXC_MSG */#else	/* all other architectures */#define RESERVED        0 /* 0x1000    reserved jhf*/#endif#endif					/* mips cpp no elif */#endif#if     ((CPU_FAMILY == MIPS) || (CPU_FAMILY == PPC))#define	STACK_RESIDENT	RAM_DST_ADRS#else#define	STACK_RESIDENT	_sdata#endif#if	(_STACK_DIR == _STACK_GROWS_DOWN)#ifdef	ROM_RESIDENT#define STACK_ADRS	STACK_RESIDENT#else#define STACK_ADRS	_romInit#endif	/* ROM_RESIDENT */#else	/* _STACK_DIR == _STACK_GROWS_UP */#ifdef	ROM_RESIDENT#define STACK_ADRS	(STACK_RESIDENT-STACK_SAVE)#else#define STACK_ADRS	(_romInit-STACK_SAVE)#endif	/*  ROM_RESIDENT */#endif	/* _STACK_DIR == _STACK_GROWS_UP *//* Default Boot Parameters */#define HOST_NAME_DEFAULT	"bootHost"	/* host name */#define TARGET_NAME_DEFAULT	"vxTarget"	/* target name (tn) */#define HOST_USER_DEFAULT	"target"	/* user (u) */#define HOST_PASSWORD_DEFAULT	""		/* password */#define SCRIPT_DEFAULT		""	 	/* startup script (s) */#define OTHER_DEFAULT		"" 		/* other (o) *//* Login security initial user name and password. * Use vxencrypt on host to find encrypted password. * Default password provided here is "password". */#ifdef	INCLUDE_SECURITY#define LOGIN_USER_NAME		"target"