## File: Makefile## The build recipe for the Monitor/BootLoader called "rrload".## Copyright (C) 2002 RidgeRun, Inc.# Author: RidgeRun, Inc  <skranz@ridgerun.com>#  - Adapted for the Cadenux environment, 9-6-02, Gregory Nutt##  This program is free software; you can redistribute  it and/or modify it#  under  the terms of  the GNU General  Public License as published by the#  Free Software Foundation;  either version 2 of the  License, or (at your#  option) any later version.##  THIS  SOFTWARE  IS  PROVIDED  ``AS  IS''  AND   ANY  EXPRESS  OR IMPLIED#  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN#  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT,  INDIRECT,#  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT#  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF#  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON#  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT#  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF#  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.##  You should have received a copy of the  GNU General Public License along#  with this program; if not, write  to the Free Software Foundation, Inc.,#  675 Mass Ave, Cambridge, MA 02139, USA.## Please report all bugs/problems to the author or <support@dsplinux.net>## key: RRGPLCR (do not remove)#include ../build/Make.contextinclude ../Make.defsinclude ../PmpVersion.defsDEBUG=ifeq ($(BSPCONF_BTLDR_MEMORY_DEBUG),y)DEBUG += -DBSPCONF_BTLDR_MEMORY_DEBUG=1endififeq ($(BSPCONF_BTLDR_MEMMAP_DEBUG),y)DEBUG += -DBSPCONF_BTLDR_MEMMAP_DEBUG=1endif#ifeq ($(BSPCONF_BTLDR_CS8900_DEBUG),y)#DEBUG += -DBSPCONF_BTLDR_CS8900_DEBUG=1#endififeq ($(BSPCONF_BTLDR_FLASH_DEBUG),y)DEBUG += -DBSPCONF_BTLDR_FLASH_DEBUG=1endif# Next, Set desired network rate, 10BaseT, 100BaseT or # autoneg (default).  This controls the boards PHY xfer rate # on the LAN wire used during bootloader TFTP image downloads.# As a practical matter, the board's network# through-put doesn't really change much between these# values since the bottleneck is the Linux net stack# and not the PHY. Skranz, Mar 2002 (revised by mayfield 3/02)#NetRate=AUTONEG#NetRate=BaseT100#NetRate=BaseT10ifeq ($(BSPCONF_ARCH),omap1510)  PREFIX = arm-linux-  EXTRA_CFLAGS =  -DCPU_LITTLE_ENDIAN -DOMAP1510 -Wa,-mno-fpu $(DEBUG)  EXTRA_SFLAGS = -Wa,-mno-fpu  HEAD =  head_omap1510.o  IO =    io_omap1510.o  ETHER = ether_smc91xxx.o  OSD = osd_null.o  SETUP = setup  CACHE = cache_null.o  USB =  SDRAM = sdram_omap1510.o  EXPORT_MAKE = Makefile_omap1510  L_SCRIPT_1 = ld.omap1510.script  L_SCRIPT_2 = ld.omap1510.ForUpgrade.script  L_TEMPLATE_1 = ld.omap1510.template  L_TEMPLATE_2 = ld.omap1510.ForUpgrade.templateendififeq ($(BSPCONF_ARCH),dm310)  PREFIX = arm-linux-  EXTRA_CFLAGS =  -DCPU_LITTLE_ENDIAN -DDM310 -Wa,-mno-fpu $(DEBUG)  EXTRA_SFLAGS = -Wa,-mno-fpu  HEAD =  head_dm310.o  IO = io_dm310.o  ETHER = ether_smc91c111.o  OSD = osd_null.o  SETUP = setup  CACHE = cache_null.o  USB =  SDRAM =   EXPORT_MAKE = Makefile_dm310  L_SCRIPT_1 = ld.dm310.script  L_SCRIPT_2 = ld.dm310.ForUpgrade.script  L_TEMPLATE_1 = ld.dm310.template  L_TEMPLATE_2 = ld.dm310.templateendififeq ($(BSPCONF_ARCH),omap710)  PREFIX = arm-linux-  EXTRA_CFLAGS =  -DCPU_LITTLE_ENDIAN -DOMAP710 -DREPLACE_VECTOR_TABLE -Wa,-mno-fpu $(DEBUG)  EXTRA_SFLAGS = -Wa,-mno-fpu  HEAD =  head_omap710.o  IO =    io_omap710.o  ETHER = ether_unknown.o  OSD = osd_null.o  VECTOR = vectors_omap710.o  SETUP = setup  CACHE = cache_null.o  USB =  SDRAM = sdram_omap710.o  EXPORT_MAKE = Makefile_omap710  L_SCRIPT_1 = ld.omap710.script  L_SCRIPT_2 = ld.omap710.ForUpgrade.script  L_TEMPLATE_2 =endififeq ($(BSPCONF_ARCH),dsc21)  PREFIX = arm-uclinux-  EXTRA_CFLAGS = -DCPU_LITTLE_ENDIAN -DDSC21 -DHAVE_SECTOR_MAP -mcpu=arm7tdmi -DNO_MM -Wa,-mno-fpu $(DEBUG)  UNUSED_EXTRA_FLAGS = -g -fno-omit-frame-pointer -fno-strict-aliasing  -Wall -Wstrict-prototypes  -O -fno-strength-reduce -pipe  EXTRA_SFLAGS = -Wa,-mno-fpu  HEAD =  head_dsc21.o  IO =    io_dsc21.o  ETHER = ether_cs8900.o  OSD = osd_null.o  SETUP = setup   CACHE = cache_null.o USB =   SDRAM = sdram_dsc21.o  L_SCRIPT_1 = ld.dsc21.script  L_SCRIPT_2 = ld.dsc21.ForUpgrade.script  L_TEMPLATE_2 =endififeq ($(BSPCONF_ARCH),c5471)  PREFIX = arm-uclinux-  EXTRA_CFLAGS = -mcpu=arm7tdmi          \                 -Wstrict-prototypes     \                 -fno-strict-aliasing    \                 -fno-strength-reduce    \                 -fno-omit-frame-pointer \                 -pipe                   \                 -DCPU_LITTLE_ENDIAN     \                 -DC5471                 \                 -Wa,-mno-fpu $(DEBUG)  EXTRA_SFLAGS = -Wa,-mno-fpu  HEAD =  head_c5471.o  HW_INIT =  IO =    io_c5471.o  ETHER = ether_c5471.o  OSD = osd_null.o  SETUP = setup  CACHE = cache_null.o  USB =  SDRAM = sdram_c5471.o  L_SCRIPT_1 = ld.c5471.script  L_SCRIPT_2 = ld.c5471.ForUpgrade.script  L_TEMPLATE_2 =endififeq ($(BSPCONF_ARCH),dsc24)  PREFIX = arm-uclinux-  EXTRA_CFLAGS = -DCPU_LITTLE_ENDIAN -DDSC24 -DHAVE_SECTOR_MAP -mcpu=arm7tdmi -Wa,-mno-fpu $(DEBUG)  EXTRA_SFLAGS = -Wa,-mno-fpu  HW_INIT = hwinit_dsc24.o  HEAD =  head_dsc24.o  IO =    io_dsc24.o  ETHER = ether_cs8900.o  OSD = osd_null.o  SDRAM = sdram_dsc24.o  SETUP = setup  CACHE = cache_null.o  USB =   L_SCRIPT_1 = ld.dsc24.script  L_SCRIPT_2 = ld.dsc24.ForUpgrade.script  L_TEMPLATE_2 =endififeq ($(BSPCONF_ARCH),dsc25)  PREFIX = arm-uclinux-  EXTRA_CFLAGS = -DCPU_LITTLE_ENDIAN -DDSC25 -DHAVE_SECTOR_MAP -mcpu=arm7tdmi -Wa,-mno-fpu $(DEBUG)  EXTRA_SFLAGS = -Wa,-mno-fpu  HW_INIT = hwinit_dsc25.o  HEAD =  head_dsc25.o  IO =    io_dsc25.o  ETHER = ether_cs8900.o  OSD = osd_null.o  SETUP = setup  CACHE = cache_null.o  USB =   SDRAM = sdram_dsc25.o  L_SCRIPT_1 = ld.dsc25.script  L_SCRIPT_2 = ld.dsc25.ForUpgrade.script  L_TEMPLATE_2 =endififeq ($(BSPCONF_ARCH),dm270)  PREFIX = arm-uclinux-  EXTRA_CFLAGS = -DCPU_LITTLE_ENDIAN -DDM270 -DHAVE_SECTOR_MAP -DPMP_RRLOAD_VER=$(PMP_RRLOAD_VER) -mcpu=arm7tdmi -Wa,-mno-fpu $(DEBUG)  EXTRA_SFLAGS = -Wa,-mno-fpu  HW_INIT = hwinit_dm270.o  HEAD =  head_dm270.o  IO =    io_dm270.o  ETHER = ether_cs8900.o#  OSD = osd_null.o  SETUP = setup  CACHE = cache_dm270.o  USB =   SDRAM =  L_SCRIPT_1 = ld.dm270.script  L_SCRIPT_2 = ld.dm270.ForUpgrade.script  L_TEMPLATE_2 = ld.dm270.ForUpgrade.templateendififeq ($(BSPCONF_ARCH),ti925)  PREFIX = arm-linux-  EXTRA_CFLAGS =  -DCPU_LITTLE_ENDIAN -DTI925 -Wa,-mno-fpu $(DEBUG)  EXTRA_SFLAGS = -Wa,-mno-fpu  HEAD =  head_ti925.o  IO =    io_ti925.o  ETHER = ether_smc91xxx.o  OSD = osd_null.o  CACHE = cache_null.o  USB =   SDRAM = sdram_ti925.o  EXPORT_MAKE = Makefile_ti925  L_SCRIPT_1 = ld.ti925.script  L_SCRIPT_2 = ld.ti925.ForUpgrade.script  L_TEMPLATE_2 =endifFLASH = unknownifeq  ($(BSPCONF_FLASH_TYPE),TOSHIBA_TC58FB160FT)    FLASH = flash_toshiba.oendififeq  ($(BSPCONF_FLASH_TYPE),FUJITSU_MBM29DL323B)    FLASH = flash_toshiba.oendififeq ($(BSPCONF_FLASH_TYPE),INTEL_28F128)  FLASH = flash_intel.oendififeq ($(BSPCONF_FLASH_TYPE),INTEL_28F160)  FLASH = flash_intel.oendififeq ($(BSPCONF_FLASH_TYPE),INTEL_28F320)  FLASH = flash_intel.oendififeq ($(BSPCONF_FLASH_TYPE),INTEL_28F640)  FLASH = flash_intel.oendififeq ($(BSPCONF_FLASH_TYPE),INTEL_28F320x2)  FLASH = flash_intel.oendififeq  ($(BSPCONF_FLASH_TYPE),AMD_AM29DL164DT)    FLASH = flash_toshiba.oendififeq  ($(BSPCONF_FLASH_TYPE),AMD_AM29L640Dx2)    FLASH = flash_amd.oendififeq  ($(BSPCONF_FLASH_TYPE),FUJITSU_29LV320T)    FLASH = flash_toshiba.oendififeq  ($(BSPCONF_FLASH_TYPE),HYNIX_HY29LD320B)    FLASH = flash_toshiba.oendififeq  ($(BSPCONF_FLASH_TYPE),CFI_CMDSET_2)    FLASH = flash_toshiba.oendififeq  ($(FLASH),unknown)     error: unsupported flash chipendififeq ($(BSPCONF_KERNEL),uclinux-2.0)  KERN = -DKERN_20endififeq ($(BSPCONF_KERNEL),uclinux-2.4)  KERN = -DKERN_24endifDECOMP = ifeq ($(BSPCONF_KERNEL_COMPRESSED),y)DECOMP = decompress.oendififeq ($(BSPCONF_FS_COMPRESSED),y)DECOMP = decompress.oendif# Don't use PMUCFLAGS  = -MD -g -Wall -D$(NetRate) $(KERN)SFLAGS  = -D__ASSEMBLY__ -D__KERNEL__ -Wa,-gstabs,-mapcs-32,-marmv4 OBJCOPY = $(PREFIX)objcopyCC      = $(PREFIX)gccLD      = $(PREFIX)ldAR      = $(PREFIX)arNM      = $(PREFIX)nmBASE_OBJECTS = $(HEAD) $(DECOMP) $(HW_INIT) $(USB) $(VECTOR) \               boot.o btldr_ui.o btldr_pi.o srec.o rawbin.o util.o tftp.o net.o i2c.o pmu.oDRV_OBJECTS = $(SDRAM) $(FLASH) $(IO) $(ETHER) $(OSD)DRV_H = sdram.h flash.h io.h ether.hEXPORT_LIST = index.html $(SETUP) $(EXPORT_MAKE) $(HEAD) $(VECTOR) \              $(DRV_OBJECTS) $(DRV_H) $(L_SCRIPT_1) $(L_SCRIPT_2) \              util.h sdram_dsc24.S.example rrload.cmm setup_$(BSPCONF_ARCH).cmmRRLOAD_LIST = $(BASE_OBJECTS) $(SDRAM) $(ETHER) $(FLASH) $(IO) $(OSD) $(CACHE)ifeq ($(BSPCONF_BTLDR_MEMORY_DEBUG),y)RRLOAD_LIST += rwmem.oendif%.o: %.c	$(CC) $(CFLAGS) $(EXTRA_CFLAGS) -c -o $@ $<%.o: %.S	$(CC) $(SFLAGS) $(EXTRA_SFLAGS) $(CFLAGS) -c -o $@ $<all: checkenv rrload setupcheckenv:	@if [ -z ${IO} ]; then \	  echo "make: *** [checkenv] BSPCONF_ARCH(${BSPCONF_ARCH}) - unsupported platform!" && false; \	  echo "Did you foget to source the environment? . ../setenv" && false; \	 fi.PHONY: clean do_exportclean:	rm -f *.o *.d *.map rrload $(RR_IMAGE) rrload.ForUpgrade $(RR_UPGRADE_IMAGE) $(SETUP) *.out msetup	for export_obj in $(EXPORT_LIST); do \	  rm -f export/$$export_obj; \	done	rm -f export/Makefileifeq ($(BSPCONF_ARCH),x86)rrload: $(BASE_OBJECTS) $(DRV_OBJECTS)	@rm *.d	@rm -f $@	gcc -O3 $(BASE_OBJECTS) $(DRV_OBJECTS) -o $@	@if [ -f rrload ] ; then   \          echo "---------------" ; \          echo "--- SUCCESS ---" ; \          echo "---------------" ; \        fiendififeq ($(BSPCONF_ARCH),omap1510)setup: head_omap1510.S sdram_omap1510.S	@rm -f $@ $@.out setup1of2.o setup2of2.o