?? ntstatus.h
字號:
// To satisfy a read request, the NT fault-tolerant file system successfully
// read the requested data from a redundant copy. This was done because
// the file system encountered a failure on a member of the fault-tolerant
// volume, but was unable to reassign the failing area of the device.
//
#define STATUS_FT_READ_RECOVERY_FROM_BACKUP ((NTSTATUS)0x4000000AL)
//
// MessageId: STATUS_FT_WRITE_RECOVERY
//
// MessageText:
//
// {Redundant Write}
// To satisfy a write request, the NT fault-tolerant file system successfully
// wrote a redundant copy of the information. This was done because the
// file system encountered a failure on a member of the fault-tolerant
// volume, but was not able to reassign the failing area of the device.
//
#define STATUS_FT_WRITE_RECOVERY ((NTSTATUS)0x4000000BL)
//
// MessageId: STATUS_SERIAL_COUNTER_TIMEOUT
//
// MessageText:
//
// {Serial IOCTL Timeout}
// A serial I/O operation completed because the time-out period expired.
// (The IOCTL_SERIAL_XOFF_COUNTER had not reached zero.)
//
#define STATUS_SERIAL_COUNTER_TIMEOUT ((NTSTATUS)0x4000000CL)
//
// MessageId: STATUS_NULL_LM_PASSWORD
//
// MessageText:
//
// {Password Too Complex}
// The NT password is too complex to be converted to a LAN Manager password.
//
#define STATUS_NULL_LM_PASSWORD ((NTSTATUS)0x4000000DL)
//
// MessageId: STATUS_IMAGE_MACHINE_TYPE_MISMATCH
//
// MessageText:
//
// {Machine Type Mismatch}
// The image file %s is valid, but is for a machine type other than the current machine. Select OK to continue, or CANCEL to fail the DLL load.
//
#define STATUS_IMAGE_MACHINE_TYPE_MISMATCH ((NTSTATUS)0x4000000EL)
//
// MessageId: STATUS_RECEIVE_PARTIAL
//
// MessageText:
//
// {Partial Data Received}
// The network transport returned partial data to its client. The remaining
// data will be sent later.
//
#define STATUS_RECEIVE_PARTIAL ((NTSTATUS)0x4000000FL)
//
// MessageId: STATUS_RECEIVE_EXPEDITED
//
// MessageText:
//
// {Expedited Data Received}
// The network transport returned data to its client that was marked as
// expedited by the remote system.
//
#define STATUS_RECEIVE_EXPEDITED ((NTSTATUS)0x40000010L)
//
// MessageId: STATUS_RECEIVE_PARTIAL_EXPEDITED
//
// MessageText:
//
// {Partial Expedited Data Received}
// The network transport returned partial data to its client and this data
// was marked as expedited by the remote system. The remaining data will
// be sent later.
//
#define STATUS_RECEIVE_PARTIAL_EXPEDITED ((NTSTATUS)0x40000011L)
//
// MessageId: STATUS_EVENT_DONE
//
// MessageText:
//
// {TDI Event Done}
// The TDI indication has completed successfully.
//
#define STATUS_EVENT_DONE ((NTSTATUS)0x40000012L)
//
// MessageId: STATUS_EVENT_PENDING
//
// MessageText:
//
// {TDI Event Pending}
// The TDI indication has entered the pending state.
//
#define STATUS_EVENT_PENDING ((NTSTATUS)0x40000013L)
//
// MessageId: STATUS_CHECKING_FILE_SYSTEM
//
// MessageText:
//
// Checking file system on %wZ
//
#define STATUS_CHECKING_FILE_SYSTEM ((NTSTATUS)0x40000014L)
//
// MessageId: STATUS_FATAL_APP_EXIT
//
// MessageText:
//
// {Fatal Application Exit}
// %s
//
#define STATUS_FATAL_APP_EXIT ((NTSTATUS)0x40000015L)
//
// MessageId: STATUS_PREDEFINED_HANDLE
//
// MessageText:
//
// The specified registry key is referenced by a predefined handle.
//
#define STATUS_PREDEFINED_HANDLE ((NTSTATUS)0x40000016L)
//
// MessageId: STATUS_WAS_UNLOCKED
//
// MessageText:
//
// {Page Unlocked}
// The page protection of a locked page was changed to 'No Access'
// and the page was unlocked from memory and from the process.
//
#define STATUS_WAS_UNLOCKED ((NTSTATUS)0x40000017L)
//
// MessageId: STATUS_SERVICE_NOTIFICATION
//
// MessageText:
//
// %s
//
#define STATUS_SERVICE_NOTIFICATION ((NTSTATUS)0x40000018L)
//
// MessageId: STATUS_WAS_LOCKED
//
// MessageText:
//
// {Page Locked}
// One of the pages to lock was already locked.
//
#define STATUS_WAS_LOCKED ((NTSTATUS)0x40000019L)
//
// MessageId: STATUS_LOG_HARD_ERROR
//
// MessageText:
//
// Application popup: %1 : %2
//
#define STATUS_LOG_HARD_ERROR ((NTSTATUS)0x4000001AL)
//
// MessageId: STATUS_ALREADY_WIN32
//
// MessageText:
//
// STATUS_ALREADY_WIN32
//
#define STATUS_ALREADY_WIN32 ((NTSTATUS)0x4000001BL)
//
// MessageId: STATUS_WX86_UNSIMULATE
//
// MessageText:
//
// Exception status code used by Win32 x86 emulation subsystem.
//
#define STATUS_WX86_UNSIMULATE ((NTSTATUS)0x4000001CL)
//
// MessageId: STATUS_WX86_CONTINUE
//
// MessageText:
//
// Exception status code used by Win32 x86 emulation subsystem.
//
#define STATUS_WX86_CONTINUE ((NTSTATUS)0x4000001DL)
//
// MessageId: STATUS_WX86_SINGLE_STEP
//
// MessageText:
//
// Exception status code used by Win32 x86 emulation subsystem.
//
#define STATUS_WX86_SINGLE_STEP ((NTSTATUS)0x4000001EL)
//
// MessageId: STATUS_WX86_BREAKPOINT
//
// MessageText:
//
// Exception status code used by Win32 x86 emulation subsystem.
//
#define STATUS_WX86_BREAKPOINT ((NTSTATUS)0x4000001FL)
//
// MessageId: STATUS_WX86_EXCEPTION_CONTINUE
//
// MessageText:
//
// Exception status code used by Win32 x86 emulation subsystem.
//
#define STATUS_WX86_EXCEPTION_CONTINUE ((NTSTATUS)0x40000020L)
//
// MessageId: STATUS_WX86_EXCEPTION_LASTCHANCE
//
// MessageText:
//
// Exception status code used by Win32 x86 emulation subsystem.
//
#define STATUS_WX86_EXCEPTION_LASTCHANCE ((NTSTATUS)0x40000021L)
//
// MessageId: STATUS_WX86_EXCEPTION_CHAIN
//
// MessageText:
//
// Exception status code used by Win32 x86 emulation subsystem.
//
#define STATUS_WX86_EXCEPTION_CHAIN ((NTSTATUS)0x40000022L)
//
// MessageId: STATUS_IMAGE_MACHINE_TYPE_MISMATCH_EXE
//
// MessageText:
//
// {Machine Type Mismatch}
// The image file %s is valid, but is for a machine type other than the current machine.
//
#define STATUS_IMAGE_MACHINE_TYPE_MISMATCH_EXE ((NTSTATUS)0x40000023L)
//
// MessageId: STATUS_NO_YIELD_PERFORMED
//
// MessageText:
//
// A yield execution was performed and no thread was available to run.
//
#define STATUS_NO_YIELD_PERFORMED ((NTSTATUS)0x40000024L)
//
// MessageId: STATUS_TIMER_RESUME_IGNORED
//
// MessageText:
//
// The resumeable flag to a timer API was ignored.
//
#define STATUS_TIMER_RESUME_IGNORED ((NTSTATUS)0x40000025L)
//
// MessageId: STATUS_ARBITRATION_UNHANDLED
//
// MessageText:
//
// The arbiter has deferred arbitration of these resources to its parent
//
#define STATUS_ARBITRATION_UNHANDLED ((NTSTATUS)0x40000026L)
/////////////////////////////////////////////////////////////////////////
//
// Standard Warning values
//
//
// Note: Do NOT use the value 0x80000000L, as this is a non-portable value
// for the NT_SUCCESS macro. Warning values start with a code of 1.
//
/////////////////////////////////////////////////////////////////////////
//
// MessageId: STATUS_GUARD_PAGE_VIOLATION
//
// MessageText:
//
// {EXCEPTION}
// Guard Page Exception
// A page of memory that marks the end of a data structure, such as a stack
// or an array, has been accessed.
//
#define STATUS_GUARD_PAGE_VIOLATION ((NTSTATUS)0x80000001L) // winnt
//
// MessageId: STATUS_DATATYPE_MISALIGNMENT
//
// MessageText:
//
// {EXCEPTION}
// Alignment Fault
// A datatype misalignment was detected in a load or store instruction.
//
#define STATUS_DATATYPE_MISALIGNMENT ((NTSTATUS)0x80000002L) // winnt
//
// MessageId: STATUS_BREAKPOINT
//
// MessageText:
//
// {EXCEPTION}
// Breakpoint
// A breakpoint has been reached.
//
#define STATUS_BREAKPOINT ((NTSTATUS)0x80000003L) // winnt
//
// MessageId: STATUS_SINGLE_STEP
//
// MessageText:
//
// {EXCEPTION}
// Single Step
// A single step or trace operation has just been completed.
//
#define STATUS_SINGLE_STEP ((NTSTATUS)0x80000004L) // winnt
//
// MessageId: STATUS_BUFFER_OVERFLOW
//
// MessageText:
//
// {Buffer Overflow}
// The data was too large to fit into the specified buffer.
//
#define STATUS_BUFFER_OVERFLOW ((NTSTATUS)0x80000005L)
//
// MessageId: STATUS_NO_MORE_FILES
//
// MessageText:
//
// {No More Files}
// No more files were found which match the file specification.
//
#define STATUS_NO_MORE_FILES ((NTSTATUS)0x80000006L)
//
// MessageId: STATUS_WAKE_SYSTEM_DEBUGGER
//
// MessageText:
//
// {Kernel Debugger Awakened}
// the system debugger was awakened by an interrupt.
//
#define STATUS_WAKE_SYSTEM_DEBUGGER ((NTSTATUS)0x80000007L)
//
// MessageId: STATUS_HANDLES_CLOSED
//
// MessageText:
//
// {Handles Closed}
// Handles to objects have been automatically closed as a result of the
// requested operation.
//
#define STATUS_HANDLES_CLOSED ((NTSTATUS)0x8000000AL)
//
// MessageId: STATUS_NO_INHERITANCE
//
// MessageText:
//
// {Non-Inheritable ACL}
// An access control list (ACL) contains no components that can be inherited.
//
#define STATUS_NO_INHERITANCE ((NTSTATUS)0x8000000BL)
//
// MessageId: STATUS_GUID_SUBSTITUTION_MADE
//
// MessageText:
//
// {GUID Substitution}
// During the translation of a global identifier (GUID) to a Windows NT
// security ID (SID), no administratively-defined GUID prefix was found.
// A substitute prefix was used, which will not compromise system security.
// However, this may provide a more restrictive access than intended.
//
#define STATUS_GUID_SUBSTITUTION_MADE ((NTSTATUS)0x8000000CL)
//
// MessageId: STATUS_PARTIAL_COPY
//
// MessageText:
//
// {Partial Copy}
// Due to protection conflicts not all the requested bytes could be
// copied.
//
#define STATUS_PARTIAL_COPY ((NTSTATUS)0x8000000DL)
//
// MessageId: STATUS_DEVICE_PAPER_EMPTY
//
// MessageText:
//
// {Out of Paper}
// The printer is out of paper.
//
#define STATUS_DEVICE_PAPER_EMPTY ((NTSTATUS)0x8000000EL)
//
// MessageId: STATUS_DEVICE_POWERED_OFF
//
// MessageText:
//
// {Device Power Is Off}
// The printer power has been turned off.
//
#define STATUS_DEVICE_POWERED_OFF ((NTSTATUS)0x8000000FL)
//
// MessageId: STATUS_DEVICE_OFF_LINE
//
// MessageText:
//
// {Device Offline}
// The printer has been taken offline.
//
#define STATUS_DEVICE_OFF_LINE ((NTSTATUS)0x80000010L)
//
// MessageId: STATUS_DEVICE_BUSY
//
// MessageText:
//
// {Device Busy}
// The device is currently busy.
//
#define STATUS_DEVICE_BUSY ((NTSTATUS)0x80000011L)
//
// MessageId: STATUS_NO_MORE_EAS
//
// MessageText:
//
// {No More EAs}
// No more extended attributes (EAs) were found for the file.
//
#define STATUS_NO_MORE_EAS ((NTSTATUS)0x80000012L)
//
// MessageId: STATUS_INVALID_EA_NAME
//
// MessageText:
//
// {Illegal EA}
// The specified extended attribute (EA) name contains at least one illegal
// character.
//
#define STATUS_INVALID_EA_NAME ((NTSTATUS)0x80000013L)
//
// MessageId: STATUS_EA_LIST_INCONSISTENT
//
// MessageText:
//
// {Inconsistent EA List}
// The extended attribute (EA) list is inconsistent.
//
#define STATUS_EA_LIST_INCONSISTENT ((NTSTATUS)0x80000014L)
//
// MessageId: STATUS_INVALID_EA_FLAG
//
// MessageText:
//
// {Invalid EA Flag}
// An invalid extended attribute (EA) flag was set.
//
#define STATUS_INVALID_EA_FLAG ((NTSTATUS)0x80000015L)
//
// MessageId: STATUS_VERIFY_REQUIRED
//
// MessageText:
//
// {Verifying Disk}
// The media has changed and a verify operation is in progress so no
// reads or writes may be performed to the device, except those used in
// the verify operation.
//
#define STATUS_VERIFY_REQUIRED ((NTSTATUS)0x80000016L)
//
// MessageId: STATUS_EXTRANEOUS_INFORMATION
//
// MessageText:
//
// {Too Much Information}
// The specified access control list (ACL) contained more information than
// was expected.
//
#define STATUS_EXTRANEOUS_INFORMATION ((NTSTATUS)0x80000017L)
//
// MessageId: STATUS_RXACT_COMMIT_NECESSARY
//
// MessageText:
//
// This warning level status indicates that the transaction state already
// exists for the registry sub-tree, but that a transaction commit was
// previously aborted. The commit has NOT been completed, but has not been
// rolled back either (so it may still be committed if desired).
// This status value is returned by the runtime library (RTL) registry
// transaction package (RXact).
//
#define STATUS_RXACT_COMMIT_NECESSARY ((NTSTATUS)0x80000018L)
//
// MessageId: STATUS_NO_MORE_ENTRIES
//
// MessageText:
//
// {No More Entries}
// No more entries are available from an enumeration operation.
//
#define STATUS_NO_MORE_ENTRIES ((NTSTATUS)0x8000001AL)
//
// MessageId: STATUS_FILEMARK_DETECTED
//
// MessageText:
//
// {Filemark Found}
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -