//  A filemark was detected.
//
#define STATUS_FILEMARK_DETECTED         ((NTSTATUS)0x8000001BL)

//
// MessageId: STATUS_MEDIA_CHANGED
//
// MessageText:
//
//  {Media Changed}
//  The media may have changed.
//
#define STATUS_MEDIA_CHANGED             ((NTSTATUS)0x8000001CL)

//
// MessageId: STATUS_BUS_RESET
//
// MessageText:
//
//  {I/O Bus Reset}
//  An I/O bus reset was detected.
//
#define STATUS_BUS_RESET                 ((NTSTATUS)0x8000001DL)

//
// MessageId: STATUS_END_OF_MEDIA
//
// MessageText:
//
//  {End of Media}
//  The end of the media was encountered.
//
#define STATUS_END_OF_MEDIA              ((NTSTATUS)0x8000001EL)

//
// MessageId: STATUS_BEGINNING_OF_MEDIA
//
// MessageText:
//
//  Beginning of tape or partition has been detected.
//
#define STATUS_BEGINNING_OF_MEDIA        ((NTSTATUS)0x8000001FL)

//
// MessageId: STATUS_MEDIA_CHECK
//
// MessageText:
//
//  {Media Changed}
//  The media may have changed.
//
#define STATUS_MEDIA_CHECK               ((NTSTATUS)0x80000020L)

//
// MessageId: STATUS_SETMARK_DETECTED
//
// MessageText:
//
//  A tape access reached a setmark.
//
#define STATUS_SETMARK_DETECTED          ((NTSTATUS)0x80000021L)

//
// MessageId: STATUS_NO_DATA_DETECTED
//
// MessageText:
//
//  During a tape access, the end of the data written is reached.
//
#define STATUS_NO_DATA_DETECTED          ((NTSTATUS)0x80000022L)

//
// MessageId: STATUS_REDIRECTOR_HAS_OPEN_HANDLES
//
// MessageText:
//
//  The redirector is in use and cannot be unloaded.
//
#define STATUS_REDIRECTOR_HAS_OPEN_HANDLES ((NTSTATUS)0x80000023L)

//
// MessageId: STATUS_SERVER_HAS_OPEN_HANDLES
//
// MessageText:
//
//  The server is in use and cannot be unloaded.
//
#define STATUS_SERVER_HAS_OPEN_HANDLES   ((NTSTATUS)0x80000024L)

//
// MessageId: STATUS_ALREADY_DISCONNECTED
//
// MessageText:
//
//  The specified connection has already been disconnected.
//
#define STATUS_ALREADY_DISCONNECTED      ((NTSTATUS)0x80000025L)

//
// MessageId: STATUS_LONGJUMP
//
// MessageText:
//
//  A long jump has been executed.
//
#define STATUS_LONGJUMP                  ((NTSTATUS)0x80000026L)



/////////////////////////////////////////////////////////////////////////
//
//  Standard Error values
//
/////////////////////////////////////////////////////////////////////////

//
// MessageId: STATUS_UNSUCCESSFUL
//
// MessageText:
//
//  {Operation Failed}
//  The requested operation was unsuccessful.
//
#define STATUS_UNSUCCESSFUL              ((NTSTATUS)0xC0000001L)

//
// MessageId: STATUS_NOT_IMPLEMENTED
//
// MessageText:
//
//  {Not Implemented}
//  The requested operation is not implemented.
//
#define STATUS_NOT_IMPLEMENTED           ((NTSTATUS)0xC0000002L)

//
// MessageId: STATUS_INVALID_INFO_CLASS
//
// MessageText:
//
//  {Invalid Parameter}
//  The specified information class is not a valid information class for
//  the specified object.
//
#define STATUS_INVALID_INFO_CLASS        ((NTSTATUS)0xC0000003L)    // ntsubauth

//
// MessageId: STATUS_INFO_LENGTH_MISMATCH
//
// MessageText:
//
//  The specified information record length does not match the length
//  required for the specified information class.
//
#define STATUS_INFO_LENGTH_MISMATCH      ((NTSTATUS)0xC0000004L)

//
// MessageId: STATUS_ACCESS_VIOLATION
//
// MessageText:
//
//  The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory
//  could not be "%s".
//
#define STATUS_ACCESS_VIOLATION          ((NTSTATUS)0xC0000005L)    // winnt ntsubauth

//
// MessageId: STATUS_IN_PAGE_ERROR
//
// MessageText:
//
//  The instruction at "0x%08lx" referenced memory at "0x%08lx". The required
//  data was not placed into memory because of an I/O error status of "0x%08lx".
//
#define STATUS_IN_PAGE_ERROR             ((NTSTATUS)0xC0000006L)    // winnt

//
// MessageId: STATUS_PAGEFILE_QUOTA
//
// MessageText:
//
//  The pagefile quota for the process has been exhausted.
//
#define STATUS_PAGEFILE_QUOTA            ((NTSTATUS)0xC0000007L)

//
// MessageId: STATUS_INVALID_HANDLE
//
// MessageText:
//
//  An invalid HANDLE was specified.
//
#define STATUS_INVALID_HANDLE            ((NTSTATUS)0xC0000008L)    // winnt

//
// MessageId: STATUS_BAD_INITIAL_STACK
//
// MessageText:
//
//  An invalid initial stack was specified in a call to NtCreateThread.
//
#define STATUS_BAD_INITIAL_STACK         ((NTSTATUS)0xC0000009L)

//
// MessageId: STATUS_BAD_INITIAL_PC
//
// MessageText:
//
//  An invalid initial start address was specified in a call to NtCreateThread.
//
#define STATUS_BAD_INITIAL_PC            ((NTSTATUS)0xC000000AL)

//
// MessageId: STATUS_INVALID_CID
//
// MessageText:
//
//  An invalid Client ID was specified.
//
#define STATUS_INVALID_CID               ((NTSTATUS)0xC000000BL)

//
// MessageId: STATUS_TIMER_NOT_CANCELED
//
// MessageText:
//
//  An attempt was made to cancel or set a timer that has an associated APC
//  and the subject thread is not the thread that originally set the timer
//  with an associated APC routine.
//
#define STATUS_TIMER_NOT_CANCELED        ((NTSTATUS)0xC000000CL)

//
// MessageId: STATUS_INVALID_PARAMETER
//
// MessageText:
//
//  An invalid parameter was passed to a service or function.
//
#define STATUS_INVALID_PARAMETER         ((NTSTATUS)0xC000000DL)

//
// MessageId: STATUS_NO_SUCH_DEVICE
//
// MessageText:
//
//  A device which does not exist was specified.
//
#define STATUS_NO_SUCH_DEVICE            ((NTSTATUS)0xC000000EL)

//
// MessageId: STATUS_NO_SUCH_FILE
//
// MessageText:
//
//  {File Not Found}
//  The file %s does not exist.
//
#define STATUS_NO_SUCH_FILE              ((NTSTATUS)0xC000000FL)

//
// MessageId: STATUS_INVALID_DEVICE_REQUEST
//
// MessageText:
//
//  The specified request is not a valid operation for the target device.
//
#define STATUS_INVALID_DEVICE_REQUEST    ((NTSTATUS)0xC0000010L)

//
// MessageId: STATUS_END_OF_FILE
//
// MessageText:
//
//  The end-of-file marker has been reached.  There is no valid data in the
//  file beyond this marker.
//
#define STATUS_END_OF_FILE               ((NTSTATUS)0xC0000011L)

//
// MessageId: STATUS_WRONG_VOLUME
//
// MessageText:
//
//  {Wrong Volume}
//  The wrong volume is in the drive.
//  Please insert volume %s into drive %s.
//
#define STATUS_WRONG_VOLUME              ((NTSTATUS)0xC0000012L)

//
// MessageId: STATUS_NO_MEDIA_IN_DEVICE
//
// MessageText:
//
//  {No Disk}
//  There is no disk in the drive.
//  Please insert a disk into drive %s.
//
#define STATUS_NO_MEDIA_IN_DEVICE        ((NTSTATUS)0xC0000013L)

//
// MessageId: STATUS_UNRECOGNIZED_MEDIA
//
// MessageText:
//
//  {Unknown Disk Format}
//  The disk in drive %s is not formatted properly.
//  Please check the disk, and reformat if necessary.
//
#define STATUS_UNRECOGNIZED_MEDIA        ((NTSTATUS)0xC0000014L)

//
// MessageId: STATUS_NONEXISTENT_SECTOR
//
// MessageText:
//
//  {Sector Not Found}
//  The specified sector does not exist.
//
#define STATUS_NONEXISTENT_SECTOR        ((NTSTATUS)0xC0000015L)

//
// MessageId: STATUS_MORE_PROCESSING_REQUIRED
//
// MessageText:
//
//  {Still Busy}
//  The specified I/O request packet (IRP) cannot be disposed of because the
//  I/O operation is not complete.
//
#define STATUS_MORE_PROCESSING_REQUIRED  ((NTSTATUS)0xC0000016L)

//
// MessageId: STATUS_NO_MEMORY
//
// MessageText:
//
//  {Not Enough Quota}
//  Not enough virtual memory or paging file quota is available to complete
//  the specified operation.
//
#define STATUS_NO_MEMORY                 ((NTSTATUS)0xC0000017L)    // winnt

//
// MessageId: STATUS_CONFLICTING_ADDRESSES
//
// MessageText:
//
//  {Conflicting Address Range}
//  The specified address range conflicts with the address space.
//
#define STATUS_CONFLICTING_ADDRESSES     ((NTSTATUS)0xC0000018L)

//
// MessageId: STATUS_NOT_MAPPED_VIEW
//
// MessageText:
//
//  Address range to unmap is not a mapped view.
//
#define STATUS_NOT_MAPPED_VIEW           ((NTSTATUS)0xC0000019L)

//
// MessageId: STATUS_UNABLE_TO_FREE_VM
//
// MessageText:
//
//  Virtual memory cannot be freed.
//
#define STATUS_UNABLE_TO_FREE_VM         ((NTSTATUS)0xC000001AL)

//
// MessageId: STATUS_UNABLE_TO_DELETE_SECTION
//
// MessageText:
//
//  Specified section cannot be deleted.
//
#define STATUS_UNABLE_TO_DELETE_SECTION  ((NTSTATUS)0xC000001BL)

//
// MessageId: STATUS_INVALID_SYSTEM_SERVICE
//
// MessageText:
//
//  An invalid system service was specified in a system service call.
//
#define STATUS_INVALID_SYSTEM_SERVICE    ((NTSTATUS)0xC000001CL)

//
// MessageId: STATUS_ILLEGAL_INSTRUCTION
//
// MessageText:
//
//  {EXCEPTION}
//  Illegal Instruction
//  An attempt was made to execute an illegal instruction.
//
#define STATUS_ILLEGAL_INSTRUCTION       ((NTSTATUS)0xC000001DL)    // winnt

//
// MessageId: STATUS_INVALID_LOCK_SEQUENCE
//
// MessageText:
//
//  {Invalid Lock Sequence}
//  An attempt was made to execute an invalid lock sequence.
//
#define STATUS_INVALID_LOCK_SEQUENCE     ((NTSTATUS)0xC000001EL)

//
// MessageId: STATUS_INVALID_VIEW_SIZE
//
// MessageText:
//
//  {Invalid Mapping}
//  An attempt was made to create a view for a section which is bigger
//  than the section.
//
#define STATUS_INVALID_VIEW_SIZE         ((NTSTATUS)0xC000001FL)

//
// MessageId: STATUS_INVALID_FILE_FOR_SECTION
//
// MessageText:
//
//  {Bad File}
//  The attributes of the specified mapping file for a section of memory
//  cannot be read.
//
#define STATUS_INVALID_FILE_FOR_SECTION  ((NTSTATUS)0xC0000020L)

//
// MessageId: STATUS_ALREADY_COMMITTED
//
// MessageText:
//
//  {Already Committed}
//  The specified address range is already committed.
//
#define STATUS_ALREADY_COMMITTED         ((NTSTATUS)0xC0000021L)

//
// MessageId: STATUS_ACCESS_DENIED
//
// MessageText:
//
//  {Access Denied}
//  A process has requested access to an object, but has not been granted
//  those access rights.
//
#define STATUS_ACCESS_DENIED             ((NTSTATUS)0xC0000022L)

//
// MessageId: STATUS_BUFFER_TOO_SMALL
//
// MessageText:
//
//  {Buffer Too Small}
//  The buffer is too small to contain the entry.  No information has been
//  written to the buffer.
//
#define STATUS_BUFFER_TOO_SMALL          ((NTSTATUS)0xC0000023L)

//
// MessageId: STATUS_OBJECT_TYPE_MISMATCH
//
// MessageText:
//
//  {Wrong Type}
//  There is a mismatch between the type of object required by the requested
//  operation and the type of object that is specified in the request.
//
#define STATUS_OBJECT_TYPE_MISMATCH      ((NTSTATUS)0xC0000024L)

//
// MessageId: STATUS_NONCONTINUABLE_EXCEPTION
//
// MessageText:
//
//  {EXCEPTION}
//  Cannot Continue
//  Windows NT cannot continue from this exception.
//
#define STATUS_NONCONTINUABLE_EXCEPTION  ((NTSTATUS)0xC0000025L)    // winnt

//
// MessageId: STATUS_INVALID_DISPOSITION
//
// MessageText:
//
//  An invalid exception disposition was returned by an exception handler.
//
#define STATUS_INVALID_DISPOSITION       ((NTSTATUS)0xC0000026L)    // winnt

//
// MessageId: STATUS_UNWIND
//
// MessageText:
//
//  Unwind exception code.
//
#define STATUS_UNWIND                    ((NTSTATUS)0xC0000027L)

//
// MessageId: STATUS_BAD_STACK
//
// MessageText:
//
//  An invalid or unaligned stack was encountered during an unwind operation.
//
#define STATUS_BAD_STACK                 ((NTSTATUS)0xC0000028L)

//
// MessageId: STATUS_INVALID_UNWIND_TARGET
//
// MessageText:
//
//  An invalid unwind target was encountered during an unwind operation.
//
#define STATUS_INVALID_UNWIND_TARGET     ((NTSTATUS)0xC0000029L)

//
// MessageId: STATUS_NOT_LOCKED
//
// MessageText:
//
//  An attempt was made to unlock a page of memory which was not locked.
//
#define STATUS_NOT_LOCKED                ((NTSTATUS)0xC000002AL)

//
// MessageId: STATUS_PARITY_ERROR
//
// MessageText:
//
//  Device parity error on I/O operation.
//
#define STATUS_PARITY_ERROR              ((NTSTATUS)0xC000002BL)

//
// MessageId: STATUS_UNABLE_TO_DECOMMIT_VM
//
// MessageText:
//
//  An attempt was made to decommit uncommitted virtual memory.
//