#include "option.h"
#include "def.h"
#include "44b.h"
#include "44blib.h"

////////////////////////////////////////
void Isr_Init(void);
void HaltUndef(void);
void HaltSwi(void);
void HaltPabort(void);      
void HaltDabort(void);

void __irq Wdt_Int(void);
volatile int isWdtInt;

void Main(void)
{
    unsigned char *src, *dst;
    int i;
    unsigned int memSum;
char aa;
    rSYSCFG=SYSCFG_8KB;
#if (PLLON==1)
    ChangePllValue(PLL_M,PLL_P,PLL_S);
#endif

    Isr_Init();
    Port_Init();
    Uart_Init(0,115200);
    Uart_Select(0);
  
   Uart_Printf("\n*                            杭州萊頓電子                               *");
	Uart_Printf("\n*                     -S3C44B0X功能部件:WDT實驗測試-                    *");
	Uart_Printf("\n*                            Version 1.1                                *");    
	Uart_Printf("\n*                        Email:aedkhz@163.com                           *");
	Uart_Printf("\n*             UART Config--COM:115.2kbps,8Bit,NP,UART0                  *");
	Uart_Printf("\n*------------------Begin to Start WDT實驗測試,OK? (Y/N)-----------------*");
	Uart_Printf("\n");
    aa= Uart_Getch();
	if((aa=='Y')||(aa=='y'))
    rINTMSK=~(BIT_GLOBAL|BIT_WDT);
    pISR_WDT=(unsigned)Wdt_Int;
    isWdtInt=0;
	
    rWTCON=((MCLK/1000000-1)<<8)|(3<<3)|(1<<2);  //  t_watchdog = 1/66/128, interrupt enable
    rWTDAT=8448/4;
    rWTCNT=8448/4;
    rWTCON=rWTCON|(1<<5);   // 1/40/128,interrupt 

    while(isWdtInt!=10);

    rWTCON=((MCLK/1000000-1)<<8)|(3<<3)|(1);  //   1/66/128, reset enable
    Uart_Printf("\nI will restart after 2 sec!!!\n");
    rWTCNT=8448*2;
    rWTCON=rWTCON|(1<<5);   // 1/40/128,interrupt 
    while(1);
    rINTMSK|=BIT_GLOBAL;
}

void __irq Wdt_Int(void)
{
    rI_ISPC=BIT_WDT;
    Uart_Printf("%d ",++isWdtInt);
}



/******************************************************************/

void Isr_Init(void)
{
    U32 i;
    
    pISR_UNDEF=(unsigned)HaltUndef;
    pISR_SWI  =(unsigned)HaltSwi;
    pISR_PABORT=(unsigned)HaltPabort;
    pISR_DABORT=(unsigned)HaltDabort;
    
     for(i=_RAM_STARTADDRESS;i<(_RAM_STARTADDRESS+0x20);i+=4)
    {
	*((volatile unsigned *)i)=0xEA000000+0x1FFE;
    }

    rINTCON=0x5;	  // Non-vectored,IRQ enable,FIQ disable    

    rINTMOD=0x0;	  // All=IRQ mode
    rINTMSK|=BIT_GLOBAL|BIT_EINT3;	  // All interrupt is masked.
}


void HaltUndef(void)
{
    Uart_Printf("Undefined instruction exception!!!\n");
    while(1);
}

void HaltSwi(void)
{
    Uart_Printf("SWI exception!!!\n");
    while(1);
}

void HaltPabort(void)
{
    Uart_Printf("Pabort exception!!!\n");
    while(1);
}

void HaltDabort(void)
{
    Uart_Printf("Dabort exception!!!\n");
    while(1);
}