//******************************************************************************
//  430Day 2004 watch.c - Multi-function demo with Clock & Temperature
//
//
//  Murugavel Raju
//  Lane Westlund
//  Texas Instruments, Inc
//  January, 2004
//  Built with IAR Embedded Workbench Version: 2.21B
//  Modified by Albus 3/25/2004
//
//
//******************************************************************************

#include  <msp430x43x.h>

#define PB_TEMP (1 << 1)                // Push Button 1, Temperature: P2.1
#define PB_ALT  (1 << 2)                // Push Button 2, Alternate: P2.2
#define TEMP_COMPENSATION 16802 / 4096

typedef unsigned int word;              // Type definition for 'word'

enum 
{
  ENGLISH,
  METRIC
};

static char *LCD = LCDMEM;
static int MODE_TIME = 5;
static int LCD_OFF_TIME = 5;

static int Refcal_ram = 1500;           // ADC12 1.5V reference calibration variable
static int Temp_slope_ram = 761;        // Temperature slope calibration variable
static int Temp_offset_ram = 469;       // Temperature offset calibration variable

int unitMode = ENGLISH;                 // The current state for measurements (metric/english)
static unsigned char seconds = 0, minutes = 0, hours = 0x12; // The default time values
int tempModeTime;                       // The number of seconds left to display the temperature
int lcdOffModeTime;                     // The number of seconds left to have the LCD off
int twoButtonsPressed;                  // The amount of time both buttons were pressed
signed int tempF;                       // Temperature variable
int held_down = 0;

void displayTime( void );               // Displays time
void displayValue( int value, int stop );// Displays an int value on the LCD.  Value can be moved in memory using the stop variable (in order to append metric characters to an int value)
void clearLCD(void);                    // Clears the LCD memory
void init(void);                        // Increments the hours variable (and rolls over to 12 if needed)
void decMinutes(void);
void incMinutes(void);
void incHours(void);
void displayTemp(void);                 // Gets the current temperature and displays it on the LCD
void changeUnitMode(void);              // Changes the units of measurement from English to Metric
void calibrate(void);                   // Calibrates the temperature
void getTemp(void);                     // Gets the current temperature
void flashLCD(void);

void flash_write(word* address, int data);// Write the (integer) data to the addressed flash
void flash_erase(word* address);        // Erase the addressed flash segment

//added the following SIX lines to declare variables in Flash INFO memory for IAR 2.x
#pragma dataseg=INFOA
__no_init static word Refcal_flash;     // ADC12 reference calibration in Flash INFO memory
__no_init static word Temp_slope;       // Temperature sensor slope calibration in Flash INFO memory
__no_init static word Temp_offset;      // Temperature sensor offset calibration in Flash INFO memory
#pragma dataseg=default

// LCD segment definitions.
#define d 0x80
#define c 0x40
#define b 0x20
#define a 0x10
#define h 0x08
#define e 0x04
#define g 0x02
#define f 0x01

const char char_gen[] = {
  a+b+c+d+e+f,                          // Displays "0"
  b+c,                                  // Displays "1"
  a+b+d+e+g,                            // Displays "2"
  a+b+c+d+g,                            // Displays "3"
  b+c+f+g,                              // Displays "4"
  a+c+d+f+g,                            // Displays "5"
  a+c+d+e+f+g,                          // Displays "6"
  a+b+c,                                // Displays "7"
  a+b+c+d+e+f+g,                        // Displays "8"
  a+b+c+d+f+g,                          // Displays "9"
  a+b+c+e+f+g,                          // Displays "A"
  0x00,                                 // Displays  Blank
  a+d+e+f,                              // Displays "C"
  a+b+f+g,                              // Displays "degrees" o
  a+d+e+f+g,                            // Displays "E"
  a+e+f+g,                              // Displays "F"   
  h,                                    // Displays ":" or "."
  g,                                    // Displays "-"
  f+g+e+d                               // Displays "t"                                                        
};


#undef a
#undef b
#undef c
#undef d
#undef e
#undef f
#undef g
#undef h

void main(void)
{ 
  
  init();
  clearLCD();                                          
    
  while( 1 )
  {
    LPM3;                               // Wait in LPM3 for the 1 second timer interrupt
    if( tempModeTime > 0 )              // Called if tempMode is the highest non-zero mode (temp was the most recent pushed)
    {
        LCDCTL |= LCDON;
        getTemp();
        
        if (tempF > 79)
          P1OUT |= 0x01;
        else
          P1OUT &= ~0x01;
          
        displayTemp();
        tempModeTime--;                 // Decrement the temp time counter (once a second)
    }
    else if( (~P2IN & (PB_ALT)) )       // if alt button held
    {
      P1OUT &= ~0x01;
      held_down++;
      if( held_down == 4 )
      {
        held_down = 0;

        unitMode ^= 1;                  // Toggle between 1 and 0
        calibrate();
        
      }
    } 
    else                                // Default, display the time
    {                               
      P1OUT &= ~0x01;
      if(lcdOffModeTime == 0)
      {
        LCDCTL |= LCDON;
        displayTime();                              
        twoButtonsPressed = 0;
      }
      else{
        lcdOffModeTime--;
      }
    }
  }
}

int __low_level_init(void)
{

  FLL_CTL0 |= XCAP18PF;                 // Set load capacitance for xtal
  WDTCTL = WDTPW + WDTHOLD;             // Disable the Watchdog
  while(FLL_CTL0 & LFOF);               // Wait until LF OSC stabilizes 
     
  return (1);                           // Flag to initialize the data segment
}

void init( void )
{
  P1OUT = 0x00;                         // P1.0 = LED
  P1DIR = 0xFF;
  P2OUT = 0x00;
  P2DIR = 0xF9;
  P3OUT = 0x00;
  P3DIR = 0xFF;
  
  P6OUT = 0x00;
  P6DIR = 0xFF;
    
  LCDCTL = LCDON + LCDSG0_3 + LCD4MUX;  // 4mux LCD, segs0-15 = outputs
    
  BTCTL = BT_fLCD_DIV128 + BTDIV + BTIP2 + BTIP1;// Set LCD frame freq = ACLK/128, set interrupt interval
  IE2 |= BTIE;                          // Enable Basic Timer interrupt
  P5SEL  = 0xFC;                        // Set Rxx and COM pins for LCD    
  clearLCD();
    
  P2DIR = ~(PB_TEMP + PB_ALT);          // Set ports to input for temperature and alternate switches
  
  P2IFG = 0;                            // Clear pending P2 interrupts
  P2IES = PB_TEMP + PB_ALT;             // Set interrupt to occur on high-to-low transition on switches
  P2IE = PB_TEMP + PB_ALT;              // Enable interrupts for switches
    
  FCTL2 ^= FXKEY + FN2 + FN1 + FN0;     // Set FLASH timing generator 447.5Khz                             
         
  ADC12CTL1 = SHP;                      // Pulse mode select for ADC12
  ADC12IE = BIT0;                       // Enable interrupts for ADC12
  
  Refcal_ram = Refcal_flash;            // Make RAM copy of Vref cal value
  Temp_slope_ram = Temp_slope;          // Make RAM copy of Temp slope value
  Temp_offset_ram = Temp_offset;        // Make RAM copy of Temp offset value
  
  _EINT();                                                         
} 

void flashLCD(void)
{
  int i;
  TACTL = TASSEL0 + TACLR + MC1;        // TACLK = ACLK, 16-bit up-mode
  for( i = 0; i < 20; i++)
  {
    LCD[i] = 0xff;
  }
  for( i = 0 ; i < 7; i++)
  {
    LCDCTL |= LCDSON;
    CCR1 = 60000;                       // Delay
    CCTL1 = CCIE;                       // Compare-mode interrupt
    LPM3;                               // Wait for delay
  }
}

void calibrate()
{      
  _DINT();
    
  Refcal_ram = 1500;                    // Make RAM copy of Vref cal value
  Temp_slope_ram = 761;                 // Make RAM copy of Temp slope value
  Temp_offset_ram = 469;                // Make RAM copy of Temp offset value
        
  _EINT();
  getTemp();
  Temp_offset_ram += tempF - 75;        // Make default temp 75 (user will be near there)
    
  while( !((~P2IN & PB_TEMP) && (~P2IN & PB_ALT)))// Loop until user holds down both buttons
  {
    
    TACTL = TASSEL0 + TACLR + MC1;      // TACLK = ACLK, 16-bit up-mode.
    P2IE &= ~(PB_TEMP + PB_ALT);        // disable interrupts for switches
 
    if(~P2IN & PB_TEMP)
    {
      Temp_offset_ram++;
    }
    if(~P2IN & PB_ALT)
    {
      Temp_offset_ram--;
    }
     
    CCR1 = 10000;                       // Delay
    CCTL1 = CCIE;                       // Compare-mode interrupt
        
    LPM3;                               // Wait for delay
        
    getTemp();
    displayTemp();
  } 
  while( (~P2IN & PB_TEMP) && (~P2IN & PB_ALT) ); // pause until user stops holding down buttons
  tempModeTime = 0;
  P2IFG = 0;
  P2IE |= PB_TEMP + PB_ALT;           // Enable interrupts for switches
 
  flash_erase((void *)&Refcal_flash);   // Erase Flash INFO segment A
  flash_write((void *)&Refcal_flash, Refcal_ram);// Write cal data to Refcal
  flash_write((void *)&Temp_offset, Temp_offset_ram);// Write offset data
  flash_write((void *)&Temp_slope, Temp_slope_ram);// Write slope data
  
  _EINT();                              // Re-enable general interrupts
  
  Refcal_ram = Refcal_flash;            // Make RAM copy of Vref cal value