# Makefile for PO directory in any package using GNU gettext.# Copyright (C) 1995-1997, 2000-2006 by Ulrich Drepper <drepper@gnu.ai.mit.edu>## This file can be copied and used freely without restrictions.  It can# be used in projects which are not available under the GNU General Public# License but which still want to provide support for the GNU gettext# functionality.# Please note that the actual code of GNU gettext is covered by the GNU# General Public License and is *not* in the public domain.## Origin: gettext-0.16PACKAGE = @PACKAGE@VERSION = @VERSION@PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@SHELL = /bin/sh@SET_MAKE@srcdir = @srcdir@top_srcdir = @top_srcdir@VPATH = @srcdir@prefix = @prefix@exec_prefix = @exec_prefix@datarootdir = @datarootdir@datadir = @datadir@localedir = @localedir@gettextsrcdir = $(datadir)/gettext/poINSTALL = @INSTALL@INSTALL_DATA = @INSTALL_DATA@# We use $(mkdir_p).# In automake <= 1.9.x, $(mkdir_p) is defined either as "mkdir -p --" or as# "$(mkinstalldirs)" or as "$(install_sh) -d". For these automake versions,# @install_sh@ does not start with $(SHELL), so we add it.# In automake >= 1.10, @mkdir_p@ is derived from ${MKDIR_P}, which is defined# either as "/path/to/mkdir -p" or ".../install-sh -c -d". For these automake# versions, $(mkinstalldirs) and $(install_sh) are unused.mkinstalldirs = $(SHELL) @install_sh@ -dinstall_sh = $(SHELL) @install_sh@MKDIR_P = @MKDIR_P@mkdir_p = @mkdir_p@GMSGFMT_ = @GMSGFMT@GMSGFMT_no = @GMSGFMT@GMSGFMT_yes = @GMSGFMT_015@GMSGFMT = $(GMSGFMT_$(USE_MSGCTXT))MSGFMT_ = @MSGFMT@MSGFMT_no = @MSGFMT@MSGFMT_yes = @MSGFMT_015@MSGFMT = $(MSGFMT_$(USE_MSGCTXT))XGETTEXT_ = @XGETTEXT@XGETTEXT_no = @XGETTEXT@XGETTEXT_yes = @XGETTEXT_015@XGETTEXT = $(XGETTEXT_$(USE_MSGCTXT))MSGMERGE = msgmergeMSGMERGE_UPDATE = @MSGMERGE@ --updateMSGINIT = msginitMSGCONV = msgconvMSGFILTER = msgfilterPOFILES = @POFILES@GMOFILES = @GMOFILES@UPDATEPOFILES = @UPDATEPOFILES@DUMMYPOFILES = @DUMMYPOFILES@DISTFILES.common = Makefile.in.in remove-potcdate.sin \$(DISTFILES.common.extra1) $(DISTFILES.common.extra2) $(DISTFILES.common.extra3)DISTFILES = $(DISTFILES.common) Makevars POTFILES.in \$(POFILES) $(GMOFILES) \$(DISTFILES.extra1) $(DISTFILES.extra2) $(DISTFILES.extra3)POTFILES = \CATALOGS = @CATALOGS@# Makevars gets inserted here. (Don't remove this line!).SUFFIXES:.SUFFIXES: .po .gmo .mo .sed .sin .nop .po-create .po-update.po.mo:	@echo "$(MSGFMT) -c -o $@ $<"; \	$(MSGFMT) -c -o t-$@ $< && mv t-$@ $@.po.gmo:	@lang=`echo $* | sed -e 's,.*/,,'`; \	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \	echo "$${cdcmd}rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o $${lang}.gmo $${lang}.po"; \	cd $(srcdir) && rm -f $${lang}.gmo && $(GMSGFMT) -c --statistics -o t-$${lang}.gmo $${lang}.po && mv t-$${lang}.gmo $${lang}.gmo.sin.sed:	sed -e '/^#/d' $< > t-$@	mv t-$@ $@all: all-@USE_NLS@all-yes: stamp-poall-no:# $(srcdir)/$(DOMAIN).pot is only created when needed. When xgettext finds no# internationalized messages, no $(srcdir)/$(DOMAIN).pot is created (because# we don't want to bother translators with empty POT files). We assume that# LINGUAS is empty in this case, i.e. $(POFILES) and $(GMOFILES) are empty.# In this case, stamp-po is a nop (i.e. a phony target).# stamp-po is a timestamp denoting the last time at which the CATALOGS have# been loosely updated. Its purpose is that when a developer or translator# checks out the package via CVS, and the $(DOMAIN).pot file is not in CVS,# "make" will update the $(DOMAIN).pot and the $(CATALOGS), but subsequent# invocations of "make" will do nothing. This timestamp would not be necessary# if updating the $(CATALOGS) would always touch them; however, the rule for# $(POFILES) has been designed to not touch files that don't need to be# changed.stamp-po: $(srcdir)/$(DOMAIN).pot	test ! -f $(srcdir)/$(DOMAIN).pot || \	  test -z "$(GMOFILES)" || $(MAKE) $(GMOFILES)	@test ! -f $(srcdir)/$(DOMAIN).pot || { \	  echo "touch stamp-po" && \	  echo timestamp > stamp-poT && \	  mv stamp-poT stamp-po; \	}# Note: Target 'all' must not depend on target '$(DOMAIN).pot-update',# otherwise packages like GCC can not be built if only parts of the source# have been downloaded.# This target rebuilds $(DOMAIN).pot; it is an expensive operation.# Note that $(DOMAIN).pot is not touched if it doesn't need to be changed.$(DOMAIN).pot-update: $(POTFILES) $(srcdir)/POTFILES.in remove-potcdate.sed	if test -n '$(MSGID_BUGS_ADDRESS)' || test '$(PACKAGE_BUGREPORT)' = '@'PACKAGE_BUGREPORT'@'; then \	  msgid_bugs_address='$(MSGID_BUGS_ADDRESS)'; \	else \	  msgid_bugs_address='$(PACKAGE_BUGREPORT)'; \	fi; \	$(XGETTEXT) --default-domain=$(DOMAIN) --directory=$(top_srcdir) \	  --add-comments=TRANSLATORS: $(XGETTEXT_OPTIONS) \	  --files-from=$(srcdir)/POTFILES.in \	  --copyright-holder='$(COPYRIGHT_HOLDER)' \	  --msgid-bugs-address="$$msgid_bugs_address"	test ! -f $(DOMAIN).po || { \	  if test -f $(srcdir)/$(DOMAIN).pot; then \	    sed -f remove-potcdate.sed < $(srcdir)/$(DOMAIN).pot > $(DOMAIN).1po && \	    sed -f remove-potcdate.sed < $(DOMAIN).po > $(DOMAIN).2po && \	    if cmp $(DOMAIN).1po $(DOMAIN).2po >/dev/null 2>&1; then \	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(DOMAIN).po; \	    else \	      rm -f $(DOMAIN).1po $(DOMAIN).2po $(srcdir)/$(DOMAIN).pot && \	      mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \	    fi; \	  else \	    mv $(DOMAIN).po $(srcdir)/$(DOMAIN).pot; \	  fi; \	}# This rule has no dependencies: we don't need to update $(DOMAIN).pot at# every "make" invocation, only create it when it is missing.# Only "make $(DOMAIN).pot-update" or "make dist" will force an update.$(srcdir)/$(DOMAIN).pot:	$(MAKE) $(DOMAIN).pot-update# This target rebuilds a PO file if $(DOMAIN).pot has changed.# Note that a PO file is not touched if it doesn't need to be changed.$(POFILES): $(srcdir)/$(DOMAIN).pot	@lang=`echo $@ | sed -e 's,.*/,,' -e 's/\.po$$//'`; \	if test -f "$(srcdir)/$${lang}.po"; then \	  test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \	  echo "$${cdcmd}$(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot"; \	  cd $(srcdir) && $(MSGMERGE_UPDATE) $${lang}.po $(DOMAIN).pot; \	else \	  $(MAKE) $${lang}.po-create; \	fiinstall: install-exec install-datainstall-exec:install-data: install-data-@USE_NLS@	if test "$(PACKAGE)" = "gettext-tools"; then \	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \	  for file in $(DISTFILES.common) Makevars.template; do \	    $(INSTALL_DATA) $(srcdir)/$$file \			    $(DESTDIR)$(gettextsrcdir)/$$file; \	  done; \	  for file in Makevars; do \	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \	  done; \	else \	  : ; \	fiinstall-data-no: allinstall-data-yes: all	$(mkdir_p) $(DESTDIR)$(datadir)	@catalogs='$(CATALOGS)'; \	for cat in $$catalogs; do \	  cat=`basename $$cat`; \	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \	  dir=$(localedir)/$$lang/LC_MESSAGES; \	  $(mkdir_p) $(DESTDIR)$$dir; \	  if test -r $$cat; then realcat=$$cat; else realcat=$(srcdir)/$$cat; fi; \	  $(INSTALL_DATA) $$realcat $(DESTDIR)$$dir/$(DOMAIN).mo; \	  echo "installing $$realcat as $(DESTDIR)$$dir/$(DOMAIN).mo"; \	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \	    if test -n "$$lc"; then \	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \	         for file in *; do \	           if test -f $$file; then \	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \	           fi; \	         done); \	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \	      else \	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \	          :; \	        else \	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \	        fi; \	      fi; \	      rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \	      ln -s ../LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \	      ln $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo 2>/dev/null || \	      cp -p $(DESTDIR)$(localedir)/$$lang/LC_MESSAGES/$(DOMAIN).mo $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \	      echo "installing $$realcat link as $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo"; \	    fi; \	  done; \	doneinstall-strip: installinstalldirs: installdirs-exec installdirs-datainstalldirs-exec:installdirs-data: installdirs-data-@USE_NLS@	if test "$(PACKAGE)" = "gettext-tools"; then \	  $(mkdir_p) $(DESTDIR)$(gettextsrcdir); \	else \	  : ; \	fiinstalldirs-data-no:installdirs-data-yes:	$(mkdir_p) $(DESTDIR)$(datadir)	@catalogs='$(CATALOGS)'; \	for cat in $$catalogs; do \	  cat=`basename $$cat`; \	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \	  dir=$(localedir)/$$lang/LC_MESSAGES; \	  $(mkdir_p) $(DESTDIR)$$dir; \	  for lc in '' $(EXTRA_LOCALE_CATEGORIES); do \	    if test -n "$$lc"; then \	      if (cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc 2>/dev/null) | grep ' -> ' >/dev/null; then \	        link=`cd $(DESTDIR)$(localedir)/$$lang && LC_ALL=C ls -l -d $$lc | sed -e 's/^.* -> //'`; \	        mv $(DESTDIR)$(localedir)/$$lang/$$lc $(DESTDIR)$(localedir)/$$lang/$$lc.old; \	        mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \	        (cd $(DESTDIR)$(localedir)/$$lang/$$lc.old && \	         for file in *; do \	           if test -f $$file; then \	             ln -s ../$$link/$$file $(DESTDIR)$(localedir)/$$lang/$$lc/$$file; \	           fi; \	         done); \	        rm -f $(DESTDIR)$(localedir)/$$lang/$$lc.old; \	      else \	        if test -d $(DESTDIR)$(localedir)/$$lang/$$lc; then \	          :; \	        else \	          rm -f $(DESTDIR)$(localedir)/$$lang/$$lc; \	          mkdir $(DESTDIR)$(localedir)/$$lang/$$lc; \	        fi; \	      fi; \	    fi; \	  done; \	done# Define this as empty until I found a useful application.installcheck:uninstall: uninstall-exec uninstall-datauninstall-exec:uninstall-data: uninstall-data-@USE_NLS@	if test "$(PACKAGE)" = "gettext-tools"; then \	  for file in $(DISTFILES.common) Makevars.template; do \	    rm -f $(DESTDIR)$(gettextsrcdir)/$$file; \	  done; \	else \	  : ; \	fiuninstall-data-no:uninstall-data-yes:	catalogs='$(CATALOGS)'; \	for cat in $$catalogs; do \	  cat=`basename $$cat`; \	  lang=`echo $$cat | sed -e 's/\.gmo$$//'`; \	  for lc in LC_MESSAGES $(EXTRA_LOCALE_CATEGORIES); do \	    rm -f $(DESTDIR)$(localedir)/$$lang/$$lc/$(DOMAIN).mo; \	  done; \	donecheck: allinfo dvi ps pdf html tags TAGS ctags CTAGS ID:mostlyclean:	rm -f remove-potcdate.sed	rm -f stamp-poT	rm -f core core.* $(DOMAIN).po $(DOMAIN).1po $(DOMAIN).2po *.new.po	rm -fr *.oclean: mostlycleandistclean: clean	rm -f Makefile Makefile.in POTFILES *.momaintainer-clean: distclean	@echo "This command is intended for maintainers to use;"	@echo "it deletes files that may require special tools to rebuild."	rm -f stamp-po $(GMOFILES)distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir)dist distdir:	$(MAKE) update-po	@$(MAKE) dist2# This is a separate target because 'update-po' must be executed before.dist2: stamp-po $(DISTFILES)	dists="$(DISTFILES)"; \	if test "$(PACKAGE)" = "gettext-tools"; then \	  dists="$$dists Makevars.template"; \	fi; \	if test -f $(srcdir)/$(DOMAIN).pot; then \	  dists="$$dists $(DOMAIN).pot stamp-po"; \	fi; \	if test -f $(srcdir)/ChangeLog; then \	  dists="$$dists ChangeLog"; \	fi; \	for i in 0 1 2 3 4 5 6 7 8 9; do \	  if test -f $(srcdir)/ChangeLog.$$i; then \	    dists="$$dists ChangeLog.$$i"; \	  fi; \	done; \	if test -f $(srcdir)/LINGUAS; then dists="$$dists LINGUAS"; fi; \	for file in $$dists; do \	  if test -f $$file; then \	    cp -p $$file $(distdir) || exit 1; \	  else \	    cp -p $(srcdir)/$$file $(distdir) || exit 1; \	  fi; \	doneupdate-po: Makefile	$(MAKE) $(DOMAIN).pot-update	test -z "$(UPDATEPOFILES)" || $(MAKE) $(UPDATEPOFILES)	$(MAKE) update-gmo# General rule for creating PO files..nop.po-create:	@lang=`echo $@ | sed -e 's/\.po-create$$//'`; \	echo "File $$lang.po does not exist. If you are a translator, you can create it through 'msginit'." 1>&2; \	exit 1# General rule for updating PO files..nop.po-update:	@lang=`echo $@ | sed -e 's/\.po-update$$//'`; \	if test "$(PACKAGE)" = "gettext-tools"; then PATH=`pwd`/../src:$$PATH; fi; \	tmpdir=`pwd`; \	echo "$$lang:"; \	test "$(srcdir)" = . && cdcmd="" || cdcmd="cd $(srcdir) && "; \	echo "$${cdcmd}$(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$lang.new.po"; \	cd $(srcdir); \	if $(MSGMERGE) $$lang.po $(DOMAIN).pot -o $$tmpdir/$$lang.new.po; then \	  if cmp $$lang.po $$tmpdir/$$lang.new.po >/dev/null 2>&1; then \	    rm -f $$tmpdir/$$lang.new.po; \	  else \	    if mv -f $$tmpdir/$$lang.new.po $$lang.po; then \	      :; \	    else \	      echo "msgmerge for $$lang.po failed: cannot move $$tmpdir/$$lang.new.po to $$lang.po" 1>&2; \	      exit 1; \	    fi; \	  fi; \	else \	  echo "msgmerge for $$lang.po failed!" 1>&2; \	  rm -f $$tmpdir/$$lang.new.po; \	fi$(DUMMYPOFILES):update-gmo: Makefile $(GMOFILES)	@:Makefile: Makefile.in.in Makevars $(top_builddir)/config.status @POMAKEFILEDEPS@	cd $(top_builddir) \	  && $(SHELL) ./config.status $(subdir)/$@.in po-directoriesforce:# Tell versions [3.59,3.63) of GNU make not to export all variables.# Otherwise a system limit (for SysV at least) may be exceeded..NOEXPORT: