?? iwpriv_usage.txt
字號:
iwpriv
=================
This is detailed explanation of each parameters for iwpriv.
Before reading this document, make sure you already read README.
-------------------------------------------------------------------------------------------------------
USAGE_1:
iwpriv rausb0 set [parameters]=[val]
NOTE:
Execute one iwpriv/set command simultaneously.
DESCRIPTION
[parameters] [val] /{range}
----------------- -------------------------------------------------
CountryRegion {0~7}
::Set country region
0: 1 ~ 11 ch
1: 1 ~ 13 ch
2: 10, 11 ch
3: 10 ~ 13 ch
4: 14 ch
5: 1 ~ 14 ch
6: 3 ~ 9 ch
7: 5 ~ 13 ch
CountryRegionABand {0~10}
::Set country region for A band
0: 36, 40, 44, 48, 52, 56, 60, 64, 149, 153, 157, 161, 165 ch
1: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140 ch
2: 36, 40, 44, 48, 52, 56, 60, 64 ch
3: 52, 56, 60, 64, 149, 153, 157, 161 ch
4: 149, 153, 157, 161, 165 ch
5: 149, 153, 157, 161 ch
6: 36, 40, 44, 48 ch
7: 36, 40, 44, 48, 52, 56, 60, 64, 100, 104, 108, 112, 116, 120, 124, 128, 132, 136, 140, 149, 153, 157, 161, 165 ch
8: 52, 56, 60, 64 ch
9: 34, 38, 42, 46 ch
10: 34, 36, 38, 40, 42, 44, 46, 48, 52, 56, 60, 64 ch
SSID {0~z, 1~32 ascii characters}
::Set AP SSID
WirelessMode {0~4}
::Set Wireless Mode
0:11b/g mixed,
1:11B only,
2:11A only
3:11a/b/g mixed,
4:11G only
TxRate {0~12}
::Set TxRate of Infrastructure mode
0:Auto, 1:1Mbps,
2:2Mbps, 3:5.5Mbps,
4:11Mbps, 5:6Mbps,
6:9Mbps, 7:12Mbps,
8:18Mbps, 9:24Mbps,
10:36Mbps, 11:48Mbps,
12:54Mbps
Channel depends on CountryRegion or CountryRegionABand
::Set Channel
BGProtection {0~2}
::Set 11B/11G Protection
0:Auto,
1:Always on,
2:Always off
TxPreamble {0~2}
::Set TxPreamble
0:Preamble Long,
1:Preamble Short,
2:Auto
RTSThreshold {1~2347}
::Set RTS Threshold
FragThreshold {256~2346}
::Set Fragment Threshold
TxBurst {0,1}
::Set TxBurst Enable or Disable
0:Disable,
1:Enable
NetworkType {Infra,Adhoc}
::Set Network type
AdhocOfdm {0~3}
::Set Adhoc Wireless Mode
0: WIFI mode(11b rates only),
1: b/g mixed,
2: 11g only,
3: 11a only
AuthMode {OPEN,SHARED,WEPAUTO,WPAPSK,WPA2PSK,WPANONE}
::Set Authentication Mode
EncrypType {NONE,WEP,TKIP,AES}
::Set Encryption Type
DefaultKeyID {1~4}
::Set Default Key ID
Key1 {5 ascii characters or 10 hex number or
13 ascii characters or 26 hex numbers}
::Set Key1 String
Key2 {5 ascii characters or 10 hex number or
13 ascii characters or 26 hex numbers}
::Set Key2 String
Key3 {5 ascii characters or 10 hex number or
13 ascii characters or 26 hex numbers}
::Set Key3 String
Key4 {5 ascii characters or 10 hex number or
13 ascii characters or 26 hex numbers}
::Set Key4 String
WPAPSK {8~63 ascii or 64 hex characters}
::WPA Pre-Shared Key
PSMode {CAM, MAX_PSP, FAST_PSP}
::Set Power Saving Mode
IEEE80211H {0,1}
::Set IEEE80211H Enable or Disable
0: Disable
1: Enable spectrum management
(This field can be enable only in A band)
-------------------------------------------------------------------------------------------------------
USAGE_2:
iwpriv rausb0 [parameters] [val]
DESCRIPTION
[parameters] [val] range explaination
----------------- ----------------------- ------------------------------------------
auth {1~5} 1:OPEN Authentication Mode
2:SHARED
3:WPAPSK
4:WPA2PSK
5:WPANONE
enc {1~4} 1:NONE Encryption Type
2:WEP
3:TKIP
4:AES
wpapsk {8~64 chars} WPAPSK/WPA2PSK Password
psm {0~2} 0:constantly awake mode (CAM) Power Saving Mode
1:MAX_PSP
2:FAST_PSP
-------------------------------------------------------------------------------------------------------
Examples
=================
-------------------------------------------------------------------------------------------------------
a> Config STA to link with AP which is OPEN/NONE(Authentication/Encryption)
1. iwpriv rausb0 set NetworkType=Infra
2. iwpriv rausb0 set AuthMode=OPEN
3. iwpriv rausb0 set EncrypType=NONE
4. iwpriv rausb0 set SSID="AP's SSID"
b> Config STA to link with AP and OPEN/WEP(Authentication/Encryption).
Default Key ID = 3
1. iwconfig rausb0 key [3]
2. iwconfig rausb0 key s:abcde
3. iwconfig rausb0 essid "AP's SSID"
c> Config STA to link with AP which is SHARED/WEP(Authentication/Encryption).
1. iwpriv rausb0 set NetworkType=Infra
2. iwpriv rausb0 set AuthMode=SHARED
3. iwpriv rausb0 set EncrypType=WEP
4. iwpriv rausb0 set Key1="AP's wep key"
5. iwpriv rausb0 set DefaultKeyID=1
6. iwpriv rausb0 set SSID="AP's SSID"
d> Config STA to link with AP which is WPAPSK/TKIP(Authentication/Encryption)
1. iwpriv rausb0 set NetworkType=Infra
2. iwpriv rausb0 set AuthMode=WPAPSK
3. iwpriv rausb0 set EncrypType=TKIP
4. iwpriv rausb0 set SSID="AP's SSID"
5. iwpriv rausb0 set WPAPSK="12345678"
6. iwpriv rausb0 set SSID="AP's SSID"
p.s Step 4 is part of generating wpapsk password and is necessary.
e> Config STA to link with AP which is WPAPSK/AES(Authentication/Encryption)
1. iwconfig rausb0 mode managed
2. iwpriv rausb0 auth 3
3. iwpriv rausb0 enc 4
4. iwconfig rausb0 essid "AP's SSID"
5. iwpriv rausb0 wpapsk 12345678
6. iwconfig rausb0 essid "AP's SSID"
f> Config STA to link with AP which is WPA2PSK/TKIP(Authentication/Encryption)
1. iwpriv rausb0 set NetworkType=Infra
2. iwpriv rausb0 set AuthMode=WPA2PSK
3. iwpriv rausb0 set EncrypType=TKIP
4. iwpriv rausb0 set SSID="AP's SSID"
5. iwpriv rausb0 set WPAPSK="12345678"
6. iwpriv rausb0 set SSID="AP's SSID"
g> Config STA to create/link as adhoc mode, which is OPEN/NONE(Authentication/Encryption)
1. iwpriv rausb0 set NetworkType=Adhoc
2. iwpriv rausb0 set AuthMode=OPEN
3. iwpriv rausb0 set EncrypType=NONE
4. iwpriv rausb0 set SSID="Adhoc's SSID"
h> Config STA to create/link as adhoc mode, which is WPANONE/TKIP(Authentication/Encryption)
1. iwpriv rausb0 set NetworkType=Adhoc
2. iwpriv rausb0 set AuthMode=WPANONE
3. iwpriv rausb0 set EncrypType=TKIP
4. iwpriv rausb0 set SSID="AP's SSID"
5. iwpriv rausb0 set WPAPSK=12345678
6. iwpriv rausb0 set SSID="AP's SSID"
i> Get site survey
iwpriv rausb0 get_site_survey
j> Get Statistics
iwpriv rausb0 stat ; read statistic counter
iwpriv rausb0 set ResetCounter=0 ; reset statistic counter
k> Link with any AP without security ; set ANY SSID (ssidLen=0)
usage: iwconfig ra0 essid ""
or
usage: iwpriv ra0 set SSID=""
===================================================================
iwlist
=================
This is detailed explanation of each parameters for iwlist.
-------------------------------------------------------------------------------------------------------
iwlist rausb0 scanning ; list the results after scanning(manual rescan)
=======================================================================================================
iwconfig
=================
The following are our support in standard configuration - iwconfig
-------------------------------------------------------------------------------------------------------
iwconfig rausb0 essid {NN|on|off} ; set ssid
iwconfig rausb0 mode {managed|ad-hoc|...} ; set wireless mode
iwconfig rausb0 freq N.NNNN[k|M|G]] ; set frequency
iwconfig rausb0 channel N ; set channel
iwconfig rausb0 ap {N|off|auto} ; set ap address
iwconfig rausb0 nick N ; set nickname
iwconfig rausb0 rate {N|auto|fixed} ; set rate
iwconfig rausb0 rts {N|auto|fixed|off} ; set rts threshold
iwconfig rausb0 frag {N|auto|fixed|off} ; set fragment threshold
iwconfig rausb0 enc {NNNN-NNNN|off} ; set encryption type
iwconfig rausb0 power {period N|timeout N} ; set power management modes
iwconfig rausb0 key {[id]|s:pswd|pswd} ; set wep key
*** Please refer to man page of 'iwconfig', 'iwlist' and 'iwpriv'. ***
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -