?? rtmp_info.c
字號:
{
Status = copy_from_user(&BssType, wrq->u.data.pointer, wrq->u.data.length);
if (BssType == Ndis802_11IBSS)
{
if (pAdapter->PortCfg.BssType != BSS_ADHOC)
{
// Config has changed
if (INFRA_ON(pAdapter))
{
RTUSBEnqueueInternalCmd(pAdapter, RT_OID_LINK_DOWN);
// First cancel linkdown timer
DBGPRINT(RT_DEBUG_TRACE, "NDIS_STATUS_MEDIA_DISCONNECT Event BB!\n");
}
//pAdapter->bConfigChanged = TRUE;
}
pAdapter->PortCfg.BssType = BSS_ADHOC;
DBGPRINT(RT_DEBUG_TRACE, "Set::OID_802_11_INFRASTRUCTURE_MODE (AD-HOC)\n");
}
else if (BssType == Ndis802_11Infrastructure)
{
if (pAdapter->PortCfg.BssType != BSS_INFRA)
{
// Config has changed
//pAdapter->bConfigChanged = TRUE;
if (ADHOC_ON(pAdapter))
RTUSBEnqueueInternalCmd(pAdapter, RT_OID_LINK_DOWN);
}
pAdapter->PortCfg.BssType = BSS_INFRA;
DBGPRINT(RT_DEBUG_TRACE, "Set::OID_802_11_INFRASTRUCTURE_MODE (INFRA)\n");
}
else
{
Status = -EINVAL;
DBGPRINT(RT_DEBUG_TRACE, "Set::OID_802_11_INFRASTRUCTURE_MODE (unknown)\n");
}
}
// Reset Ralink supplicant to not use, it will be set to start when UI set PMK key
pAdapter->PortCfg.WpaState = SS_NOTUSE;
break;
case OID_802_11_REMOVE_WEP:
DBGPRINT(RT_DEBUG_TRACE, "Set::OID_802_11_REMOVE_WEP\n");
if (wrq->u.data.length != sizeof(NDIS_802_11_KEY_INDEX)){
Status = -EINVAL;
}
else
{
KeyIdx = *(NDIS_802_11_KEY_INDEX *) wrq->u.data.pointer;
if (KeyIdx & 0x80000000)
{
// Should never set default bit when remove key
Status = -EINVAL;
}
else
{
KeyIdx = KeyIdx & 0x0fffffff;
if (KeyIdx >= 4){
Status = -EINVAL;
}
else
{
pAdapter->SharedKey[KeyIdx].KeyLen = 0;
pAdapter->SharedKey[KeyIdx].CipherAlg = CIPHER_NONE;
AsicRemoveSharedKeyEntry(pAdapter, 0, (UCHAR)KeyIdx);
}
}
}
break;
case RT_OID_802_11_RESET_COUNTERS:
NdisZeroMemory(&pAdapter->WlanCounters, sizeof(COUNTER_802_11));
NdisZeroMemory(&pAdapter->Counters8023, sizeof(COUNTER_802_3));
NdisZeroMemory(&pAdapter->RalinkCounters, sizeof(COUNTER_RALINK));
pAdapter->Counters8023.RxNoBuffer = 0;
pAdapter->Counters8023.GoodReceives = 0;
pAdapter->Counters8023.RxNoBuffer = 0;
DBGPRINT(RT_DEBUG_TRACE, "Set::RT_OID_802_11_RESET_COUNTERS (=%d)\n", pAdapter->Counters8023.GoodReceives);
break;
case OID_802_11_RTS_THRESHOLD:
if (wrq->u.data.length != sizeof(NDIS_802_11_RTS_THRESHOLD))
Status = -EINVAL;
else
{
Status = copy_from_user(&RtsThresh, wrq->u.data.pointer, wrq->u.data.length);
if (RtsThresh > MAX_RTS_THRESHOLD)
Status = -EINVAL;
else
pAdapter->PortCfg.RtsThreshold = (USHORT)RtsThresh;
}
DBGPRINT(RT_DEBUG_TRACE, "Set::OID_802_11_RTS_THRESHOLD (=%d)\n",RtsThresh);
break;
case OID_802_11_FRAGMENTATION_THRESHOLD:
if (wrq->u.data.length != sizeof(NDIS_802_11_FRAGMENTATION_THRESHOLD))
Status = -EINVAL;
else
{
Status = copy_from_user(&FragThresh, wrq->u.data.pointer, wrq->u.data.length);
pAdapter->PortCfg.bFragmentZeroDisable = FALSE;
if (FragThresh > MAX_FRAG_THRESHOLD || FragThresh < MIN_FRAG_THRESHOLD)
{
if (FragThresh == 0)
{
pAdapter->PortCfg.FragmentThreshold = MAX_FRAG_THRESHOLD;
pAdapter->PortCfg.bFragmentZeroDisable = TRUE;
}
else
Status = -EINVAL;
}
else
pAdapter->PortCfg.FragmentThreshold = (USHORT)FragThresh;
}
DBGPRINT(RT_DEBUG_TRACE, "Set::OID_802_11_FRAGMENTATION_THRESHOLD (=%d) \n",FragThresh);
break;
case OID_802_11_POWER_MODE:
if (wrq->u.data.length != sizeof(NDIS_802_11_POWER_MODE))
Status = -EINVAL;
else
{
Status = copy_from_user(&PowerMode, wrq->u.data.pointer, wrq->u.data.length);
// save user's policy here, but not change PortCfg.Psm immediately
if (PowerMode == Ndis802_11PowerModeCAM)
{
// clear PSM bit immediately
MlmeSetPsmBit(pAdapter, PWR_ACTIVE);
OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
if (pAdapter->PortCfg.bWindowsACCAMEnable == FALSE)
pAdapter->PortCfg.WindowsPowerMode = PowerMode;
pAdapter->PortCfg.WindowsBatteryPowerMode = PowerMode;
}
else if (PowerMode == Ndis802_11PowerModeMAX_PSP)
{
// do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
// to exclude certain situations.
// MlmeSetPsmBit(pAdapter, PWR_SAVE);
if (pAdapter->PortCfg.bWindowsACCAMEnable == FALSE)
pAdapter->PortCfg.WindowsPowerMode = PowerMode;
pAdapter->PortCfg.WindowsBatteryPowerMode = PowerMode;
OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
pAdapter->PortCfg.DefaultListenCount = 5;
}
else if (PowerMode == Ndis802_11PowerModeFast_PSP)
{
// do NOT turn on PSM bit here, wait until MlmeCheckForPsmChange()
// to exclude certain situations.
// MlmeSetPsmBit(pAdapter, PWR_SAVE);
OPSTATUS_SET_FLAG(pAdapter, fOP_STATUS_RECEIVE_DTIM);
if (pAdapter->PortCfg.bWindowsACCAMEnable == FALSE)
pAdapter->PortCfg.WindowsPowerMode = PowerMode;
pAdapter->PortCfg.WindowsBatteryPowerMode = PowerMode;
pAdapter->PortCfg.DefaultListenCount = 3;
}
else
Status = -EINVAL;
}
DBGPRINT(RT_DEBUG_TRACE, "Set::OID_802_11_POWER_MODE (=%d)\n",PowerMode);
break;
case OID_802_11_TX_POWER_LEVEL:
if (wrq->u.data.length != sizeof(NDIS_802_11_TX_POWER_LEVEL))
Status = -EINVAL;
else
{
Status = copy_from_user(&TxPowerLevel, wrq->u.data.pointer, wrq->u.data.length);
if (TxPowerLevel > MAX_TX_POWER_LEVEL)
Status = -EINVAL;
else
pAdapter->PortCfg.TxPower = (UCHAR)TxPowerLevel;
}
DBGPRINT(RT_DEBUG_TRACE, "Set::OID_802_11_TX_POWER_LEVEL (=%d) \n",TxPowerLevel);
break;
case RT_OID_802_11_TX_POWER_LEVEL_1:
if (wrq->u.data.length < sizeof(ULONG))
Status = -EINVAL;
else
{
ULONG PowerTemp;
Status = copy_from_user(&PowerTemp, wrq->u.data.pointer, wrq->u.data.length);
if (PowerTemp > 100)
PowerTemp = 0xffffffff; // AUTO
pAdapter->PortCfg.TxPowerDefault = PowerTemp; //keep current setting.
// Only update TxPowerPercentage if the value is smaller than current AP setting
// TODO: 2005-03-08 john removed the following line.
// if (pAdapter->PortCfg.TxPowerDefault < pAdapter->PortCfg.TxPowerPercentage)
pAdapter->PortCfg.TxPowerPercentage = pAdapter->PortCfg.TxPowerDefault;
DBGPRINT(RT_DEBUG_TRACE, "Set::RT_OID_802_11_TX_POWER_LEVEL_1 (=%d)\n", pAdapter->PortCfg.TxPowerPercentage);
}
break;
case OID_802_11_PRIVACY_FILTER:
if (wrq->u.data.length != sizeof(NDIS_802_11_PRIVACY_FILTER))
Status = -EINVAL;
else
{
NDIS_802_11_PRIVACY_FILTER Filter;
Status = copy_from_user(&Filter, wrq->u.data.pointer, wrq->u.data.length);
if ((Filter == Ndis802_11PrivFilterAcceptAll) || (Filter == Ndis802_11PrivFilter8021xWEP))
pAdapter->PortCfg.PrivacyFilter = Filter;
else
Status = -EINVAL;
}
DBGPRINT(RT_DEBUG_TRACE, "Set::OID_802_11_PRIVACY_FILTER (=%d) \n",pAdapter->PortCfg.PrivacyFilter);
break;
case OID_802_11_NETWORK_TYPE_IN_USE:
if (wrq->u.data.length != sizeof(NDIS_802_11_NETWORK_TYPE))
Status = -EINVAL;
else
{
Status = copy_from_user(&NetType, wrq->u.data.pointer, wrq->u.data.length);
RTUSBEnqueueCmdFromNdis(pAdapter, OID_802_11_NETWORK_TYPE_IN_USE, TRUE, &NetType, wrq->u.data.length);
DBGPRINT(RT_DEBUG_TRACE, "Set::OID_802_11_NETWORK_TYPE_IN_USE (=%d)\n",NetType);
}
break;
case OID_802_11_RX_ANTENNA_SELECTED:
if (wrq->u.data.length != sizeof(NDIS_802_11_ANTENNA))
Status = -EINVAL;
else
{
Status = copy_from_user(&AntDiv, wrq->u.data.pointer, wrq->u.data.length);
RTUSBEnqueueCmdFromNdis(pAdapter, OID_802_11_RX_ANTENNA_SELECTED, FALSE, &AntDiv, wrq->u.data.length);
}
break;
case OID_802_11_TX_ANTENNA_SELECTED:
if (wrq->u.data.length != sizeof(NDIS_802_11_ANTENNA))
Status = -EINVAL;
else
{
Status = copy_from_user(&AntDiv, wrq->u.data.pointer, wrq->u.data.length);
RTUSBEnqueueCmdFromNdis(pAdapter, OID_802_11_TX_ANTENNA_SELECTED, FALSE, &AntDiv, wrq->u.data.length);
}
break;
// For WPA PSK PMK key
case RT_OID_802_11_ADD_WPA:
DBGPRINT(RT_DEBUG_ERROR, "!!!!!!!!!!!!!!!!!!!!!Set::RT_OID_802_11_ADD_WPA !!\n");
pKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
if(pKey == NULL)
{
Status = -ENOMEM;
break;
}
Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
if (pKey->Length != wrq->u.data.length)
{
Status = -EINVAL;
DBGPRINT(RT_DEBUG_TRACE, "Set::RT_OID_802_11_ADD_WPA, Failed!!\n");
}
else
{
if ((pAdapter->PortCfg.AuthMode != Ndis802_11AuthModeWPAPSK) &&\
(pAdapter->PortCfg.AuthMode != Ndis802_11AuthModeWPA2PSK) &&\
(pAdapter->PortCfg.AuthMode != Ndis802_11AuthModeWPANone) )
{
Status = -EOPNOTSUPP;
DBGPRINT(RT_DEBUG_TRACE, "Set::RT_OID_802_11_ADD_WPA, Failed!! [AuthMode != WPAPSK/WPA2PSK/WPANONE]\n");
}
else if ((pAdapter->PortCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||\
(pAdapter->PortCfg.AuthMode == Ndis802_11AuthModeWPA2PSK) ) // Only for WPA PSK mode
{
INT i;
pAdapter->PortCfg.PskKey.KeyLen = (UCHAR) pKey->KeyLength;
NdisMoveMemory(pAdapter->PortCfg.PskKey.Key, &pKey->KeyMaterial, pKey->KeyLength);
// Use RaConfig as PSK agent.
// Start STA supplicant state machine
pAdapter->PortCfg.WpaState = SS_START;
DBGPRINT(RT_DEBUG_TRACE,"PskKey = Len = %d \n ",pKey->KeyLength);
for (i = 0; i < 32; i++)
{
DBGPRINT_RAW(RT_DEBUG_TRACE,"%02x:", pAdapter->PortCfg.PskKey.Key[i]);
}
DBGPRINT(RT_DEBUG_TRACE,"\n");
// Use RaConfig as PSK agent.
// Start STA supplicant state machine
pAdapter->PortCfg.WpaState = SS_START;
DBGPRINT(RT_DEBUG_TRACE, "Set::RT_OID_802_11_ADD_WPA (id=0x%x, Len=%d-byte)\n", pKey->KeyIndex, pKey->KeyLength);
}
else
{
Status = RTUSBEnqueueCmdFromNdis(pAdapter, OID_802_11_ADD_KEY, TRUE, pKey, pKey->Length);
}
}
kfree(pKey);
break;
case OID_802_11_REMOVE_KEY:
pRemoveKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
if(pRemoveKey == NULL)
{
Status = -ENOMEM;
break;
}
Status = copy_from_user(pRemoveKey, wrq->u.data.pointer, wrq->u.data.length);
if (pRemoveKey->Length != wrq->u.data.length)
{
Status = -EINVAL;
DBGPRINT(RT_DEBUG_TRACE, "Set::OID_802_11_REMOVE_KEY, Failed!!\n");
}
else
{
Status = RTMPRemoveKeySanity(pAdapter, pRemoveKey);
if (Status == NDIS_STATUS_SUCCESS)
{
RTUSBEnqueueCmdFromNdis(pAdapter, OID_802_11_REMOVE_KEY, TRUE, pRemoveKey, wrq->u.data.length);
}
}
DBGPRINT(RT_DEBUG_TRACE, "Set::OID_802_11_REMOVE_KEY (id=0x%x, Len=%d-byte)\n", pRemoveKey->KeyIndex, pRemoveKey->Length);
kfree(pRemoveKey);
break;
// New for WPA
case OID_802_11_ADD_KEY:
DBGPRINT(RT_DEBUG_ERROR, "!!!!!!!!!!!!!!!!!!!!!Set::OID_802_11_ADD_KEY !!\n");
pKey = kmalloc(wrq->u.data.length, MEM_ALLOC_FLAG);
if(pKey == NULL)
{
Status = -ENOMEM;
break;
}
Status = copy_from_user(pKey, wrq->u.data.pointer, wrq->u.data.length);
if (pKey->Length != wrq->u.data.length)
{
Status = -EINVAL;
DBGPRINT(RT_DEBUG_TRACE, "Set::OID_802_11_ADD_KEY, Failed!!\n");
}
else
{
if (pAdapter->PortCfg.AuthMode >= Ndis802_11AuthModeWPA)
{
// Probably PortCfg.Bssid reset to zero as linkdown,
// Set pKey.BSSID to Broadcast bssid in order to ensure AsicAddSharedKeyEntry done
if(pAdapter->PortCfg.AuthMode == Ndis802_11AuthModeWPANone)
{
NdisMoveMemory(pKey->BSSID, BROADCAST_ADDR, 6);
}
RTUSBEnqueueCmdFromNdis(pAdapter, OID_802_11_ADD_KEY, TRUE, pKey, pKey->Length);
}
else // Old WEP stuff
{
Status = RTMPWPAWepKeySanity(pAdapter, pKey);
if (Status == NDIS_STATUS_SUCCESS)
RTUSBEnqueueCmdFromNdis(pAdapter, OID_802_11_ADD_KEY_WEP, TRUE, pKey, wrq->u.data.length);
}
KeyIdx = pKey->KeyIndex & 0x0fffffff;
DBGPRINT(RT_DEBUG_TRACE, "Set::OID_802_11_ADD_KEY (id=0x%x, Len=%d-byte)\n", KeyIdx, pKey->KeyLength);
}
kfree(pKey);
break;
#if WPA_SUPPLICANT_SUPPORT
case OID_802_11_SET_IEEE8021X:
if (wrq->u.data.length != sizeof(BOOLEAN))
Status = -EINVAL;
else
{
Status = copy_from_user(&IEEE8021xState, wrq->u.data.pointer, wrq->u.data.length);
pAdapter->PortCfg.IEEE8021X = IEEE8021xState;
// set WEP key to ASIC for static wep mode
if(pAdapter->PortCfg.IEEE8021X == FALSE && pAdapter->PortCfg.AuthMode < Ndis802_11AuthModeWPA )
{
int idx;
idx = pAdapter->PortCfg.DefaultKeyId;
//for (idx=0; idx < 4; idx++)
{
DBGPRINT_RAW(RT_DEBUG_TRACE, "Set WEP key to Asic for static wep mode =>\n");
if(pAdapter->PortCfg.DesireSharedKey[idx].KeyLen != 0)
{
pAdapter->SharedKey[idx].KeyLen = pAdapter->PortCfg.DesireSharedKey[idx].KeyLen;
NdisMoveMemory(pAdapter->SharedKey[idx].Key, pAdapter->PortCfg.DesireSharedKey[idx].Key, pAdapter->SharedKey[idx].KeyLen);
pAdapter->SharedKey[idx].CipherAlg = pAdapter->PortCfg.DesireSharedKey[idx].CipherAlg;
AsicAddSharedKeyEntry(pAdapter, 0, (UCHAR)idx, pAdapter->SharedKey[idx].CipherAlg, pAdapter->SharedKey[idx].Key, NULL, NULL);
}
}
}
DBGPRINT(RT_DEBUG_TRACE, "Set::OID_802_11_SET_IEEE8021X (=%d)\n", pAdapter->PortCfg.IEEE8021X);
}
break;
case OID_802_11_SET_IEEE8021X_REQUIRE_KEY:
if (wrq->u.data.length != sizeof(B?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -