?? connect.c
字號:
/*
***************************************************************************
* Ralink Tech Inc.
* 4F, No. 2 Technology 5th Rd.
* Science-based Industrial Park
* Hsin-chu, Taiwan, R.O.C.
*
* (c) Copyright 2002-2006, Ralink Technology, Inc.
*
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
* *
************************************************************************
Module Name:
connect.c
Abstract:
Revision History:
Who When What
-------- ---------- ----------------------------------------------
John 2004-08-08 Major modification from RT2560
*/
#include "rt_config.h"
UCHAR CipherSuiteWpaNoneTkip[] = {
0x00, 0x50, 0xf2, 0x01, // oui
0x01, 0x00, // Version
0x00, 0x50, 0xf2, 0x02, // Multicast
0x01, 0x00, // Number of unicast
0x00, 0x50, 0xf2, 0x02, // unicast
0x01, 0x00, // number of authentication method
0x00, 0x50, 0xf2, 0x00 // authentication
};
UCHAR CipherSuiteWpaNoneTkipLen = (sizeof(CipherSuiteWpaNoneTkip) / sizeof(UCHAR));
UCHAR CipherSuiteWpaNoneAes[] = {
0x00, 0x50, 0xf2, 0x01, // oui
0x01, 0x00, // Version
0x00, 0x50, 0xf2, 0x04, // Multicast
0x01, 0x00, // Number of unicast
0x00, 0x50, 0xf2, 0x04, // unicast
0x01, 0x00, // number of authentication method
0x00, 0x50, 0xf2, 0x00 // authentication
};
UCHAR CipherSuiteWpaNoneAesLen = (sizeof(CipherSuiteWpaNoneAes) / sizeof(UCHAR));
// The following MACRO is called after 1. starting an new IBSS, 2. succesfully JOIN an IBSS,
// or 3. succesfully ASSOCIATE to a BSS, 4. successfully RE_ASSOCIATE to a BSS
// All settings successfuly negotiated furing MLME state machines become final settings
// and are copied to pAd->ActiveCfg
#define COPY_SETTINGS_FROM_MLME_AUX_TO_ACTIVE_CFG(_pAd) \
{ \
_pAd->PortCfg.SsidLen = _pAd->MlmeAux.SsidLen; \
NdisMoveMemory(_pAd->PortCfg.Ssid, _pAd->MlmeAux.Ssid, _pAd->MlmeAux.SsidLen); \
COPY_MAC_ADDR(_pAd->PortCfg.Bssid, _pAd->MlmeAux.Bssid); \
_pAd->PortCfg.Channel = _pAd->MlmeAux.Channel; \
_pAd->ActiveCfg.Aid = _pAd->MlmeAux.Aid; \
_pAd->ActiveCfg.AtimWin = _pAd->MlmeAux.AtimWin; \
_pAd->ActiveCfg.CapabilityInfo = _pAd->MlmeAux.CapabilityInfo; \
_pAd->PortCfg.BeaconPeriod = _pAd->MlmeAux.BeaconPeriod; \
_pAd->ActiveCfg.CfpMaxDuration = _pAd->MlmeAux.CfpMaxDuration; \
_pAd->ActiveCfg.CfpPeriod = _pAd->MlmeAux.CfpPeriod; \
_pAd->ActiveCfg.SupRateLen = _pAd->MlmeAux.SupRateLen; \
NdisMoveMemory(_pAd->ActiveCfg.SupRate, _pAd->MlmeAux.SupRate, _pAd->MlmeAux.SupRateLen); \
_pAd->ActiveCfg.ExtRateLen = _pAd->MlmeAux.ExtRateLen; \
NdisMoveMemory(_pAd->ActiveCfg.ExtRate, _pAd->MlmeAux.ExtRate, _pAd->MlmeAux.ExtRateLen); \
NdisMoveMemory(&_pAd->PortCfg.APEdcaParm, &_pAd->MlmeAux.APEdcaParm, sizeof(EDCA_PARM)); \
NdisMoveMemory(&_pAd->PortCfg.APQosCapability, &_pAd->MlmeAux.APQosCapability, sizeof(QOS_CAPABILITY_PARM)); \
NdisMoveMemory(&_pAd->PortCfg.APQbssLoad, &_pAd->MlmeAux.APQbssLoad, sizeof(QBSS_LOAD_PARM)); \
}
/*
==========================================================================
Description:
==========================================================================
*/
VOID MlmeCntlInit(
IN PRTMP_ADAPTER pAd,
IN STATE_MACHINE *S,
OUT STATE_MACHINE_FUNC Trans[])
{
// Control state machine differs from other state machines, the interface
// follows the standard interface
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
}
/*
==========================================================================
Description:
==========================================================================
*/
VOID MlmeCntlMachinePerformAction(
IN PRTMP_ADAPTER pAd,
IN STATE_MACHINE *S,
IN MLME_QUEUE_ELEM *Elem)
{
switch(pAd->Mlme.CntlMachine.CurrState)
{
case CNTL_IDLE:
CntlIdleProc(pAd, Elem);
break;
case CNTL_WAIT_DISASSOC:
CntlWaitDisassocProc(pAd, Elem);
break;
case CNTL_WAIT_JOIN:
CntlWaitJoinProc(pAd, Elem);
break;
// CNTL_WAIT_REASSOC is the only state in CNTL machine that does
// not triggered directly or indirectly by "RTMPSetInformation(OID_xxx)".
// Therefore not protected by NDIS's "only one outstanding OID request"
// rule. Which means NDIS may SET OID in the middle of ROAMing attempts.
// Current approach is to block new SET request at RTMPSetInformation()
// when CntlMachine.CurrState is not CNTL_IDLE
case CNTL_WAIT_REASSOC:
CntlWaitReassocProc(pAd, Elem);
break;
case CNTL_WAIT_START:
CntlWaitStartProc(pAd, Elem);
break;
case CNTL_WAIT_AUTH:
CntlWaitAuthProc(pAd, Elem);
break;
case CNTL_WAIT_AUTH2:
CntlWaitAuthProc2(pAd, Elem);
break;
case CNTL_WAIT_ASSOC:
CntlWaitAssocProc(pAd, Elem);
break;
case CNTL_WAIT_OID_LIST_SCAN:
if(Elem->MsgType == MT2_SCAN_CONF)
{
// Resume TxRing after SCANING complete. We hope the out-of-service time
// won't be too long to let upper layer time-out the waiting frames
RTUSBResumeMsduTransmission(pAd);
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
}
break;
case CNTL_WAIT_OID_DISASSOC:
if (Elem->MsgType == MT2_DISASSOC_CONF)
{
LinkDown(pAd, FALSE);
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
}
break;
default:
DBGPRINT_ERR("!ERROR! CNTL - Illegal message type(=%d)", Elem->MsgType);
break;
}
}
/*
==========================================================================
Description:
==========================================================================
*/
VOID CntlIdleProc(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
{
MLME_DISASSOC_REQ_STRUCT DisassocReq;
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_RADIO_OFF))
{
if (pAd->MlmeAux.CurrReqIsFromNdis)
pAd->MlmeAux.CurrReqIsFromNdis = FALSE;
return;
}
switch(Elem->MsgType)
{
case OID_802_11_SSID:
CntlOidSsidProc(pAd, Elem);
break;
case OID_802_11_BSSID:
CntlOidRTBssidProc(pAd,Elem);
break;
case OID_802_11_BSSID_LIST_SCAN:
CntlOidScanProc(pAd,Elem);
break;
case OID_802_11_DISASSOCIATE:
DisassocParmFill(pAd, &DisassocReq, pAd->PortCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_DISASSOC;
// Set the AutoReconnectSsid to prevent it reconnect to old SSID
// Since calling this indicate user don't want to connect to that SSID anymore.
pAd->MlmeAux.AutoReconnectSsidLen= 32;
NdisZeroMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.AutoReconnectSsidLen);
break;
case MT2_MLME_ROAMING_REQ:
CntlMlmeRoamingProc(pAd, Elem);
break;
default:
DBGPRINT(RT_DEBUG_TRACE, "CNTL - Illegal message in CntlIdleProc(MsgType=%d)\n",Elem->MsgType);
break;
}
}
VOID CntlOidScanProc(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM *Elem)
{
MLME_SCAN_REQ_STRUCT ScanReq;
ULONG BssIdx = BSS_NOT_FOUND;
BSS_ENTRY CurrBss;
DBGPRINT(RT_DEBUG_INFO, "CNTL - SCAN starts\n");
// record current BSS if network is connected.
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED))
{
BssIdx = BssSsidTableSearch(&pAd->ScanTab, pAd->PortCfg.Bssid, pAd->PortCfg.Ssid, pAd->PortCfg.SsidLen, pAd->PortCfg.Channel);
if (BssIdx != BSS_NOT_FOUND)
{
NdisMoveMemory(&CurrBss, &pAd->ScanTab.BssEntry[BssIdx], sizeof(BSS_ENTRY));
// 2003-2-20 reset this RSSI to a low value but not zero. In normal case, the coming SCAN
// should return a correct RSSI to overwrite this. If no BEEACON received after SCAN,
// at least we still report a "greater than 0" RSSI since we claim it's CONNECTED.
//CurrBss.Rssi = pAd->BbpRssiToDbmDelta - 85; // assume -85 dB
}
}
// clean up previous SCAN result, add current BSS back to table if any
BssTableInit(&pAd->ScanTab);
if (BssIdx != BSS_NOT_FOUND)
{
// DDK Note: If the NIC is associated with a particular BSSID and SSID
// that are not contained in the list of BSSIDs generated by this scan, the
// BSSID description of the currently associated BSSID and SSID should be
// appended to the list of BSSIDs in the NIC's database.
// To ensure this, we append this BSS as the first entry in SCAN result
NdisMoveMemory(&pAd->ScanTab.BssEntry[0], &CurrBss, sizeof(BSS_ENTRY));
pAd->ScanTab.BssNr = 1;
}
ScanParmFill(pAd, &ScanReq, "", 0, BSS_ANY, SCAN_PASSIVE);
MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ,
sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
}
/*
==========================================================================
Description:
recorded in PortCfg.Ssid[]
==========================================================================
*/
VOID CntlOidSsidProc(
IN PRTMP_ADAPTER pAd,
IN MLME_QUEUE_ELEM * Elem)
{
PNDIS_802_11_SSID pOidSsid = (NDIS_802_11_SSID *)Elem->Msg;
MLME_DISASSOC_REQ_STRUCT DisassocReq;
ULONG Now;
// Step 1. record the desired user settings to MlmeAux
NdisMoveMemory(pAd->MlmeAux.Ssid, pOidSsid->Ssid, pOidSsid->SsidLength);
pAd->MlmeAux.SsidLen = (UCHAR)pOidSsid->SsidLength;
NdisZeroMemory(pAd->MlmeAux.Bssid, MAC_ADDR_LEN);
pAd->MlmeAux.BssType = pAd->PortCfg.BssType;
//
// Update Reconnect Ssid, that user desired to connect.
//
NdisMoveMemory(pAd->MlmeAux.AutoReconnectSsid, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
pAd->MlmeAux.AutoReconnectSsidLen = pAd->MlmeAux.SsidLen;
// step 2. find all matching BSS in the lastest SCAN result (inBssTab)
// & log them into MlmeAux.SsidBssTab for later-on iteration. Sort by RSSI order
BssTableSsidSort(pAd, &pAd->MlmeAux.SsidBssTab, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen);
DBGPRINT(RT_DEBUG_TRACE, "CNTL - %d BSS match the desire SSID - %s\n",pAd->MlmeAux.SsidBssTab.BssNr, pAd->MlmeAux.Ssid);
Now = jiffies;
if (OPSTATUS_TEST_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED) &&
(pAd->PortCfg.SsidLen == pAd->MlmeAux.SsidBssTab.BssEntry[0].SsidLen) &&
NdisEqualMemory(pAd->PortCfg.Ssid, pAd->MlmeAux.SsidBssTab.BssEntry[0].Ssid, pAd->PortCfg.SsidLen) &&
MAC_ADDR_EQUAL(pAd->PortCfg.Bssid, pAd->MlmeAux.SsidBssTab.BssEntry[0].Bssid))
{
// Case 1. already connected with an AP who has the desired SSID
// with highest RSSI
if (((pAd->PortCfg.AuthMode == Ndis802_11AuthModeWPA) ||
(pAd->PortCfg.AuthMode == Ndis802_11AuthModeWPAPSK) ||
(pAd->PortCfg.AuthMode == Ndis802_11AuthModeWPA2) ||
(pAd->PortCfg.AuthMode == Ndis802_11AuthModeWPA2PSK)
#if WPA_SUPPLICANT_SUPPORT
|| (pAd->PortCfg.IEEE8021X == TRUE)
#endif
) &&
(pAd->PortCfg.PortSecured == WPA_802_1X_PORT_NOT_SECURED))
{
// case 1.1 For WPA, WPA-PSK, if the 1x port is not secured, we have to redo
// connection process
DBGPRINT(RT_DEBUG_TRACE, "CNTL - disassociate with current AP...\n");
DisassocParmFill(pAd, &DisassocReq, pAd->PortCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
}
else if (pAd->bConfigChanged == TRUE)
{
// case 1.2 Important Config has changed, we have to reconnect to the same AP
DBGPRINT(RT_DEBUG_TRACE, "CNTL - disassociate with current AP Because config changed...\n");
DisassocParmFill(pAd, &DisassocReq, pAd->PortCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
}
else
{
// case 1.3. already connected to the SSID with highest RSSI.
DBGPRINT(RT_DEBUG_TRACE, "CNTL - already with this BSSID. ignore this SET_SSID request\n");
// We only check if same to the BSSID with highest RSSI.
// If roaming of same SSID required, we still do the reconnection.
// same BSSID, go back to idle state directly
if (pAd->MlmeAux.CurrReqIsFromNdis)
{
}
pAd->Mlme.CntlMachine.CurrState = CNTL_IDLE;
}
}
else if (INFRA_ON(pAd))
{
// case 2. active INFRA association existent
// roaming is done within miniport driver, nothing to do with configuration
// utility. so upon a new SET(OID_802_11_SSID) is received, we just
// disassociate with the current associated AP,
// then perform a new association with this new SSID, no matter the
// new/old SSID are the same or not.
DBGPRINT(RT_DEBUG_TRACE, "CNTL - disassociate with current AP...\n");
DisassocParmFill(pAd, &DisassocReq, pAd->PortCfg.Bssid, REASON_DISASSOC_STA_LEAVING);
MlmeEnqueue(pAd, ASSOC_STATE_MACHINE, MT2_MLME_DISASSOC_REQ,
sizeof(MLME_DISASSOC_REQ_STRUCT), &DisassocReq);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_DISASSOC;
}
else
{
if (ADHOC_ON(pAd))
{
DBGPRINT(RT_DEBUG_TRACE, "CNTL - drop current ADHOC\n");
LinkDown(pAd, FALSE);
OPSTATUS_CLEAR_FLAG(pAd, fOP_STATUS_MEDIA_STATE_CONNECTED);
DBGPRINT(RT_DEBUG_TRACE, "NDIS_STATUS_MEDIA_DISCONNECT Event C!\n");
}
if ((pAd->MlmeAux.SsidBssTab.BssNr == 0) &&
(pAd->PortCfg.bAutoReconnect == TRUE) &&
(pAd->MlmeAux.BssType == BSS_INFRA) &&
(MlmeValidateSSID(pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen) == TRUE))
{
MLME_SCAN_REQ_STRUCT ScanReq;
DBGPRINT(RT_DEBUG_TRACE, "CNTL - No matching BSS, start a new scan\n");
ScanParmFill(pAd, &ScanReq, pAd->MlmeAux.Ssid, pAd->MlmeAux.SsidLen, BSS_ANY, SCAN_ACTIVE);
MlmeEnqueue(pAd, SYNC_STATE_MACHINE, MT2_MLME_SCAN_REQ,
sizeof(MLME_SCAN_REQ_STRUCT), &ScanReq);
pAd->Mlme.CntlMachine.CurrState = CNTL_WAIT_OID_LIST_SCAN;
// Reset Missed scan number
pAd->PortCfg.LastScanTime = Now;
}
else
{
pAd->MlmeAux.BssIdx = 0;
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -