?? mlme.c
字號:
/*
***************************************************************************
* Ralink Tech Inc.
* 4F, No. 2 Technology 5th Rd.
* Science-based Industrial Park
* Hsin-chu, Taiwan, R.O.C.
*
* (c) Copyright 2002-2006, Ralink Technology, Inc.
*
* This program is free software; you can redistribute it and/or modify *
* it under the terms of the GNU General Public License as published by *
* the Free Software Foundation; either version 2 of the License, or *
* (at your option) any later version. *
* *
* This program is distributed in the hope that it will be useful, *
* but WITHOUT ANY WARRANTY; without even the implied warranty of *
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the *
* GNU General Public License for more details. *
* *
* You should have received a copy of the GNU General Public License *
* along with this program; if not, write to the *
* Free Software Foundation, Inc., *
* 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. *
* *
************************************************************************
Module Name:
mlme.c
Abstract:
Revision History:
Who When What
-------- ---------- ----------------------------------------------
John Chang 2004-08-25 Modify from RT2500 code base
John Chang 2004-09-06 modified for RT2600
*/
#include "rt_config.h"
#include <stdarg.h>
#include <net/iw_handler.h>
// since RT61 has better RX sensibility, we have to limit TX ACK rate not to exceed our normal data TX rate.
// otherwise the WLAN peer may not be able to receive the ACK thus downgrade its data TX rate
ULONG BasicRateMask[12] = {0xfffff001 /* 1-Mbps */, 0xfffff003 /* 2 Mbps */, 0xfffff007 /* 5.5 */, 0xfffff00f /* 11 */,
0xfffff01f /* 6 */ , 0xfffff03f /* 9 */ , 0xfffff07f /* 12 */ , 0xfffff0ff /* 18 */,
0xfffff1ff /* 24 */ , 0xfffff3ff /* 36 */ , 0xfffff7ff /* 48 */ , 0xffffffff /* 54 */};
UCHAR BROADCAST_ADDR[MAC_ADDR_LEN] = {0xff, 0xff, 0xff, 0xff, 0xff, 0xff};
UCHAR ZERO_MAC_ADDR[MAC_ADDR_LEN] = {0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
// e.g. RssiSafeLevelForTxRate[RATE_36]" means if the current RSSI is greater than
// this value, then it's quaranteed capable of operating in 36 mbps TX rate in
// clean environment.
// TxRate: 1 2 5.5 11 6 9 12 18 24 36 48 54 72 100
CHAR RssiSafeLevelForTxRate[] ={ -92, -91, -90, -87, -88, -86, -85, -83, -81, -78, -72, -71, -40, -40 };
// 1 2 5.5 11
UCHAR Phy11BNextRateDownward[] = {RATE_1, RATE_1, RATE_2, RATE_5_5};
UCHAR Phy11BNextRateUpward[] = {RATE_2, RATE_5_5, RATE_11, RATE_11};
// 1 2 5.5 11 6 9 12 18 24 36 48 54
UCHAR Phy11BGNextRateDownward[]= {RATE_1, RATE_1, RATE_2, RATE_5_5,RATE_11, RATE_6, RATE_11, RATE_12, RATE_18, RATE_24, RATE_36, RATE_48};
UCHAR Phy11BGNextRateUpward[] = {RATE_2, RATE_5_5, RATE_11, RATE_12, RATE_9, RATE_12, RATE_18, RATE_24, RATE_36, RATE_48, RATE_54, RATE_54};
// 1 2 5.5 11 6 9 12 18 24 36 48 54
UCHAR Phy11ANextRateDownward[] = {RATE_6, RATE_6, RATE_6, RATE_6, RATE_6, RATE_6, RATE_9, RATE_12, RATE_18, RATE_24, RATE_36, RATE_48};
UCHAR Phy11ANextRateUpward[] = {RATE_9, RATE_9, RATE_9, RATE_9, RATE_9, RATE_12, RATE_18, RATE_24, RATE_36, RATE_48, RATE_54, RATE_54};
// RATE_1, 2, 5.5, 11, 6, 9, 12, 18, 24, 36, 48, 54
static USHORT RateUpPER[] = { 40, 40, 35, 20, 20, 20, 20, 16, 10, 16, 10, 6 }; // in percentage
static USHORT RateDownPER[] = { 50, 50, 45, 45, 35, 35, 35, 35, 25, 25, 25, 13 }; // in percentage
UCHAR RateIdToMbps[] = { 1, 2, 5, 11, 6, 9, 12, 18, 24, 36, 48, 54, 72, 100};
USHORT RateIdTo500Kbps[] = { 2, 4, 11, 22, 12, 18, 24, 36, 48, 72, 96, 108, 144, 200};
UCHAR ZeroSsid[32] = {0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00};
UCHAR SsidIe = IE_SSID;
UCHAR SupRateIe = IE_SUPP_RATES;
UCHAR ExtRateIe = IE_EXT_SUPP_RATES;
UCHAR ErpIe = IE_ERP;
UCHAR DsIe = IE_DS_PARM;
UCHAR TimIe = IE_TIM;
UCHAR WpaIe = IE_WPA;
UCHAR Wpa2Ie = IE_WPA2;
UCHAR IbssIe = IE_IBSS_PARM;
extern UCHAR WPA_OUI[];
extern UCHAR RSN_OUI[];
RTMP_RF_REGS RF2528RegTable[] = {
// ch R1 R2 R3(TX0~4=0) R4
{1, 0x94002c0c, 0x94000786, 0x94068255, 0x940fea0b},
{2, 0x94002c0c, 0x94000786, 0x94068255, 0x940fea1f},
{3, 0x94002c0c, 0x9400078a, 0x94068255, 0x940fea0b},
{4, 0x94002c0c, 0x9400078a, 0x94068255, 0x940fea1f},
{5, 0x94002c0c, 0x9400078e, 0x94068255, 0x940fea0b},
{6, 0x94002c0c, 0x9400078e, 0x94068255, 0x940fea1f},
{7, 0x94002c0c, 0x94000792, 0x94068255, 0x940fea0b},
{8, 0x94002c0c, 0x94000792, 0x94068255, 0x940fea1f},
{9, 0x94002c0c, 0x94000796, 0x94068255, 0x940fea0b},
{10, 0x94002c0c, 0x94000796, 0x94068255, 0x940fea1f},
{11, 0x94002c0c, 0x9400079a, 0x94068255, 0x940fea0b},
{12, 0x94002c0c, 0x9400079a, 0x94068255, 0x940fea1f},
{13, 0x94002c0c, 0x9400079e, 0x94068255, 0x940fea0b},
{14, 0x94002c0c, 0x940007a2, 0x94068255, 0x940fea13}
};
UCHAR NUM_OF_2528_CHNL = (sizeof(RF2528RegTable) / sizeof(RTMP_RF_REGS));
RTMP_RF_REGS RF5226RegTable[] = {
// ch R1 R2 R3(TX0~4=0) R4
{1, 0x94002c0c, 0x94000786, 0x94068255, 0x940fea0b},
{2, 0x94002c0c, 0x94000786, 0x94068255, 0x940fea1f},
{3, 0x94002c0c, 0x9400078a, 0x94068255, 0x940fea0b},
{4, 0x94002c0c, 0x9400078a, 0x94068255, 0x940fea1f},
{5, 0x94002c0c, 0x9400078e, 0x94068255, 0x940fea0b},
{6, 0x94002c0c, 0x9400078e, 0x94068255, 0x940fea1f},
{7, 0x94002c0c, 0x94000792, 0x94068255, 0x940fea0b},
{8, 0x94002c0c, 0x94000792, 0x94068255, 0x940fea1f},
{9, 0x94002c0c, 0x94000796, 0x94068255, 0x940fea0b},
{10, 0x94002c0c, 0x94000796, 0x94068255, 0x940fea1f},
{11, 0x94002c0c, 0x9400079a, 0x94068255, 0x940fea0b},
{12, 0x94002c0c, 0x9400079a, 0x94068255, 0x940fea1f},
{13, 0x94002c0c, 0x9400079e, 0x94068255, 0x940fea0b},
{14, 0x94002c0c, 0x940007a2, 0x94068255, 0x940fea13},
{36, 0x94002c0c, 0x9400099a, 0x94098255, 0x940fea23},
{40, 0x94002c0c, 0x940009a2, 0x94098255, 0x940fea03},
{44, 0x94002c0c, 0x940009a6, 0x94098255, 0x940fea0b},
{48, 0x94002c0c, 0x940009aa, 0x94098255, 0x940fea13},
{52, 0x94002c0c, 0x940009ae, 0x94098255, 0x940fea1b},
{56, 0x94002c0c, 0x940009b2, 0x94098255, 0x940fea23},
{60, 0x94002c0c, 0x940009ba, 0x94098255, 0x940fea03},
{64, 0x94002c0c, 0x940009be, 0x94098255, 0x940fea0b},
{100, 0x94002c0c, 0x94000a2a, 0x940b8255, 0x940fea03},
{104, 0x94002c0c, 0x94000a2e, 0x940b8255, 0x940fea0b},
{108, 0x94002c0c, 0x94000a32, 0x940b8255, 0x940fea13},
{112, 0x94002c0c, 0x94000a36, 0x940b8255, 0x940fea1b},
{116, 0x94002c0c, 0x94000a3a, 0x940b8255, 0x940fea23},
{120, 0x94002c0c, 0x94000a82, 0x940b8255, 0x940fea03},
{124, 0x94002c0c, 0x94000a86, 0x940b8255, 0x940fea0b},
{128, 0x94002c0c, 0x94000a8a, 0x940b8255, 0x940fea13},
{132, 0x94002c0c, 0x94000a8e, 0x940b8255, 0x940fea1b},
{136, 0x94002c0c, 0x94000a92, 0x940b8255, 0x940fea23},
{140, 0x94002c0c, 0x94000a9a, 0x940b8255, 0x940fea03},
{149, 0x94002c0c, 0x94000aa2, 0x940b8255, 0x940fea1f},
{153, 0x94002c0c, 0x94000aa6, 0x940b8255, 0x940fea27},
{157, 0x94002c0c, 0x94000aae, 0x940b8255, 0x940fea07},
{161, 0x94002c0c, 0x94000ab2, 0x940b8255, 0x940fea0f},
{165, 0x94002c0c, 0x94000ab6, 0x940b8255, 0x940fea17},
//MMAC(Japan)J52 ch 34,38,42,46
{34, 0x94002c0c, 0x9408099a, 0x940da255, 0x940d3a0b},
{38, 0x94002c0c, 0x9408099e, 0x940da255, 0x940d3a13},
{42, 0x94002c0c, 0x940809a2, 0x940da255, 0x940d3a1b},
{46, 0x94002c0c, 0x940809a6, 0x940da255, 0x940d3a23},
};
UCHAR NUM_OF_5226_CHNL = (sizeof(RF5226RegTable) / sizeof(RTMP_RF_REGS));
// Reset the RFIC setting to new series
static RTMP_RF_REGS RF5225RegTable[] = {
// ch R1 R2 R3(TX0~4=0) R4
{1, 0x95002ccc, 0x95004786, 0x95068455, 0x950ffa0b},
{2, 0x95002ccc, 0x95004786, 0x95068455, 0x950ffa1f},
{3, 0x95002ccc, 0x9500478a, 0x95068455, 0x950ffa0b},
{4, 0x95002ccc, 0x9500478a, 0x95068455, 0x950ffa1f},
{5, 0x95002ccc, 0x9500478e, 0x95068455, 0x950ffa0b},
{6, 0x95002ccc, 0x9500478e, 0x95068455, 0x950ffa1f},
{7, 0x95002ccc, 0x95004792, 0x95068455, 0x950ffa0b},
{8, 0x95002ccc, 0x95004792, 0x95068455, 0x950ffa1f},
{9, 0x95002ccc, 0x95004796, 0x95068455, 0x950ffa0b},
{10, 0x95002ccc, 0x95004796, 0x95068455, 0x950ffa1f},
{11, 0x95002ccc, 0x9500479a, 0x95068455, 0x950ffa0b},
{12, 0x95002ccc, 0x9500479a, 0x95068455, 0x950ffa1f},
{13, 0x95002ccc, 0x9500479e, 0x95068455, 0x950ffa0b},
{14, 0x95002ccc, 0x950047a2, 0x95068455, 0x950ffa13},
// 802.11 UNI / HyperLan 2
{36, 0x95002ccc, 0x9500499a, 0x9509be55, 0x950ffa23},
{40, 0x95002ccc, 0x950049a2, 0x9509be55, 0x950ffa03},
{44, 0x95002ccc, 0x950049a6, 0x9509be55, 0x950ffa0b},
{48, 0x95002ccc, 0x950049aa, 0x9509be55, 0x950ffa13},
{52, 0x95002ccc, 0x950049ae, 0x9509ae55, 0x950ffa1b},
{56, 0x95002ccc, 0x950049b2, 0x9509ae55, 0x950ffa23},
{60, 0x95002ccc, 0x950049ba, 0x9509ae55, 0x950ffa03},
{64, 0x95002ccc, 0x950049be, 0x9509ae55, 0x950ffa0b},
// 802.11 HyperLan 2
{100, 0x95002ccc, 0x95004a2a, 0x950bae55, 0x950ffa03},
{104, 0x95002ccc, 0x95004a2e, 0x950bae55, 0x950ffa0b},
{108, 0x95002ccc, 0x95004a32, 0x950bae55, 0x950ffa13},
{112, 0x95002ccc, 0x95004a36, 0x950bae55, 0x950ffa1b},
{116, 0x95002ccc, 0x95004a3a, 0x950bbe55, 0x950ffa23},
{120, 0x95002ccc, 0x95004a82, 0x950bbe55, 0x950ffa03},
{124, 0x95002ccc, 0x95004a86, 0x950bbe55, 0x950ffa0b},
{128, 0x95002ccc, 0x95004a8a, 0x950bbe55, 0x950ffa13},
{132, 0x95002ccc, 0x95004a8e, 0x950bbe55, 0x950ffa1b},
{136, 0x95002ccc, 0x95004a92, 0x950bbe55, 0x950ffa23},
// 802.11 UNII
{140, 0x95002ccc, 0x95004a9a, 0x950bbe55, 0x950ffa03},
{149, 0x95002ccc, 0x95004aa2, 0x950bbe55, 0x950ffa1f},
{153, 0x95002ccc, 0x95004aa6, 0x950bbe55, 0x950ffa27},
{157, 0x95002ccc, 0x95004aae, 0x950bbe55, 0x950ffa07},
{161, 0x95002ccc, 0x95004ab2, 0x950bbe55, 0x950ffa0f},
{165, 0x95002ccc, 0x95004ab6, 0x950bbe55, 0x950ffa17},
//MMAC(Japan)J52 ch 34,38,42,46
{34, 0x95002ccc, 0x9500499a, 0x9509be55, 0x950ffa0b},
{38, 0x95002ccc, 0x9500499e, 0x9509be55, 0x950ffa13},
{42, 0x95002ccc, 0x950049a2, 0x9509be55, 0x950ffa1b},
{46, 0x95002ccc, 0x950049a6, 0x9509be55, 0x950ffa23},
};
UCHAR NUM_OF_5225_CHNL = (sizeof(RF5225RegTable) / sizeof(RTMP_RF_REGS));
/*
==========================================================================
Description:
initialize the MLME task and its data structure (queue, spinlock,
timer, state machines).
Return:
always return NDIS_STATUS_SUCCESS
==========================================================================
*/
NDIS_STATUS MlmeInit(
IN PRTMP_ADAPTER pAd)
{
NDIS_STATUS Status = NDIS_STATUS_SUCCESS;
DBGPRINT(RT_DEBUG_TRACE, "--> MLME Initialize\n");
do
{
Status = MlmeQueueInit(&pAd->Mlme.Queue);
if(Status != NDIS_STATUS_SUCCESS)
break;
// Initialize Mlme Memory Handler
// Allocate 20 nonpaged memory pool which size are MAX_LEN_OF_MLME_BUFFER for use
Status = MlmeInitMemoryHandler(pAd, 20, MAX_LEN_OF_MLME_BUFFER);
if(Status != NDIS_STATUS_SUCCESS)
{
MlmeQueueDestroy(&pAd->Mlme.Queue);
break;
}
pAd->Mlme.bRunning = FALSE;
NdisAllocateSpinLock(&pAd->Mlme.TaskLock);
// initialize table
BssTableInit(&pAd->ScanTab);
// init state machines
ASSERT(ASSOC_FUNC_SIZE == MAX_ASSOC_MSG * MAX_ASSOC_STATE);
AssocStateMachineInit(pAd, &pAd->Mlme.AssocMachine, pAd->Mlme.AssocFunc);
ASSERT(AUTH_FUNC_SIZE == MAX_AUTH_MSG * MAX_AUTH_STATE);
AuthStateMachineInit(pAd, &pAd->Mlme.AuthMachine, pAd->Mlme.AuthFunc);
ASSERT(AUTH_RSP_FUNC_SIZE == MAX_AUTH_RSP_MSG * MAX_AUTH_RSP_STATE);
AuthRspStateMachineInit(pAd, &pAd->Mlme.AuthRspMachine, pAd->Mlme.AuthRspFunc);
ASSERT(SYNC_FUNC_SIZE == MAX_SYNC_MSG * MAX_SYNC_STATE);
SyncStateMachineInit(pAd, &pAd->Mlme.SyncMachine, pAd->Mlme.SyncFunc);
ASSERT(WPA_PSK_FUNC_SIZE == MAX_WPA_PSK_MSG * MAX_WPA_PSK_STATE);
WpaPskStateMachineInit(pAd, &pAd->Mlme.WpaPskMachine, pAd->Mlme.WpaPskFunc);
// Since we are using switch/case to implement it, the init is different from the above
// state machine init
MlmeCntlInit(pAd, &pAd->Mlme.CntlMachine, NULL);
// Init mlme periodic timer
RTMPInitTimer(pAd, &pAd->Mlme.PeriodicTimer, &MlmePeriodicExec);
// Set mlme periodic timer
RTMPSetTimer(pAd, &pAd->Mlme.PeriodicTimer, MLME_TASK_EXEC_INTV);
// software-based RX Antenna diversity
RTMPInitTimer(pAd, &pAd->RxAnt.RxAntDiversityTimer, &AsicRxAntEvalTimeout);
// Init timer to report link down event
RTMPInitTimer(pAd, &pAd->Mlme.LinkDownTimer, &LinkDownExec);
} while (FALSE);
DBGPRINT(RT_DEBUG_TRACE, "<-- MLME Initialize\n");
return Status;
}
/*
==========================================================================
Description:
main loop of the MLME
Pre:
Mlme has to be initialized, and there are something inside the queue
Note:
This function is invoked from MPSetInformation and MPReceive;
This task guarantee only one MlmeHandler will run.
==========================================================================
*/
VOID MlmeHandler(
IN PRTMP_ADAPTER pAd)
{
MLME_QUEUE_ELEM *Elem = NULL;
ULONG IrqFlags;
// Only accept MLME and Frame from peer side, no other (control/data) frame should
// get into this state machine
NdisAcquireSpinLock(&pAd->Mlme.TaskLock, IrqFlags);
if(pAd->Mlme.bRunning)
{
NdisReleaseSpinLock(&pAd->Mlme.TaskLock, IrqFlags);
return;
}
else
{
pAd->Mlme.bRunning = TRUE;
}
NdisReleaseSpinLock(&pAd->Mlme.TaskLock, IrqFlags);
while (!MlmeQueueEmpty(&pAd->Mlme.Queue))
{
if (RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_MLME_RESET_IN_PROGRESS) ||
RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_HALT_IN_PROGRESS) ||
RTMP_TEST_FLAG(pAd, fRTMP_ADAPTER_NIC_NOT_EXIST))
{
DBGPRINT(RT_DEBUG_TRACE, "Device Halted or Removed or MlmeRest, exit MlmeHandler! (queue num = %d)\n", pAd->Mlme.Queue.Num);
break;
}
//From message type, determine which state machine I should drive
if (MlmeDequeue(&pAd->Mlme.Queue, &Elem))
{
if (Elem->MsgType == RT_CMD_RESET_MLME)
{
DBGPRINT_RAW(RT_DEBUG_TRACE, "!!! reset MLME state machine !!!\n");
MlmeRestartStateMachine(pAd);
MlmePostRestartStateMachine(pAd);
Elem->Occupied = FALSE;
Elem->MsgLen = 0;
continue;
}
// if dequeue success
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -