/*-----------------------------------------------------*
*文件名:vectors08.c                                    *
*功  能:用于定義中斷矢量表                             *
*-----------------------------------------------------*/
//[頭文件]
#include "GP32C.H"          //包含頭文件
#include "SCI.h"            //串行通信子程序頭文件
/*isrRe:接收中斷處理函數-------------------------------*
*功  能:接收1個數據, 發送接到的數據                    *
*-----------------------------------------------------*/
//#pragma interrupt_handler是編譯器的偽指令 
#pragma interrupt_handler isrRe  
void isrRe(void) 
  {
    unsigned char SerialBuff[1];    //存放接收數據的數組
  	unsigned char i;
	  asm("SEI");	       //禁止所有中斷
        //接收1個數據
        i=SCIReN(1,SerialBuff);
        //若收到數據,則發送接到的數據 
        if(i==0) SCISendN(1,SerialBuff); 
	  asm("CLI");		   //開放總中斷	
  }
//未定義的中斷處理函數,本函數不能刪除
#pragma interrupt_handler isrDummy  
void isrDummy(void) 
  {
  }
//中斷矢量表，需定義中斷函數，可修改下表中的相應項目
//(interrupt service routine，isr 中斷處理程序)
#pragma abs_address:0xffdc    //中斷向量表起始地址
void (* const _vectab[])(void) = {            
	isrDummy,   //時基中斷 
	isrDummy,		//AD轉換中斷      
	isrDummy, 	//鍵盤中斷    
	isrDummy,		//SCI TC/TE 
	isrRe,      //SCI RF/IDLE 
	isrDummy,		//SCI PE/FE/NF/OR
	isrDummy,		//SPI TE  
	isrDummy,		//SPI MOD/OVR/RF
	isrDummy,		//TIM2溢出中斷 
	isrDummy,		//TIM2通道1
	isrDummy,		//TIM2通道0
	isrDummy,		//TIM1溢出中斷      
	isrDummy,		//TIM1通道1
	isrDummy,		//TIM1通道0
	isrDummy,		//CGM     
	isrDummy,		//IRQ     
	isrDummy		//SWI       
    //RESET也是中斷，定義在 crt08.o中 
   };
#pragma end_abs_address