/*++
THIS CODE AND INFORMATION IS PROVIDED "AS IS" WITHOUT WARRANTY OF
ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO
THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A
PARTICULAR PURPOSE.
Copyright (c) 2001. Samsung Electronics, co. ltd  All rights reserved.

Module Name:  

Abstract:

	ARM920(S3C2410) interrupt service routine

rev:
	2002.4.3	: first S3C2410 version (SOC)	

	2002.2.5	: system tick modification (kwangyoon LEE, kwangyoon@samsung.com)	
					- one shot timer
	2002.1.29	: bug fixups (kwangyoon LEE, kwangyoon@samsung.com)	
					- system tick interrupt
	2002.1.28	: CE.NET port (kwangyoon LEE, kwangyoon@samsung.com)
	2002.1.22	: Add USBD interrupt (kwangyoon LEE, kwangyoon@samsung.com)

Notes: 
--*/

#include <windows.h>
#include <nkintr.h>
#include <oalintr.h>
#include "p2.h"
#include "p2debug.h"
#include "drv_glob.h"

#include <S2410.h>

extern DWORD CurMSec;
extern DWORD DiffMSec;

#if (CE_MAJOR_VER == 0x0003)
	extern DWORD ticksleft, dwSleepMin, dwPreempt;
	extern DWORD DiffMSec;
#else
	extern DWORD dwReschedTime;
#endif

extern DWORD AlarmTime;
extern volatile LARGE_INTEGER CurTicks;
extern DWORD dwReschedIncrement;
extern int (*PProfileInterrupt)(void);

extern DWORD dwIsrTime1, dwIsrTime2;
extern BOOL fIntrTime, fIntrTimeToggle;
extern WORD wNumInterrupts;    // Reset by a read of the ISR times from the IST
extern DWORD dwIntrTimeCountdown;
extern DWORD dwIntrTimeCountdownRef;
extern DWORD dwSPC;
extern DWORD PerfCountSinceTick();
extern BOOL fInterruptFlag;
extern VOID CPUPowerReset();
extern VOID OEMEmergencyPowerOff();


static USBD_GLOBALS *usbdShMem=&((DRIVER_GLOBALS *)DRIVER_GLOBALS_PHYSICAL_MEMORY_START)->usbd; //:-)
void UsbdClearEir(void);  //:-)

DWORD OEMTranslateIrq(DWORD dwIrq)
{
    return dwIrq;
}
DWORD OEMTranslateSysIntr(DWORD SysIntr)
{
    return (SysIntr<SYSINTR_FIRMWARE?(DWORD)-1:SysIntr);
}

void OEMInterruptHandlerFIQ() 
{
	// This FIQ interrupt is from BAT_FLT.
	volatile IOPreg *s2410IOP = (IOPreg *)IOP_BASE;
	volatile INTreg *s2410INT = (INTreg *)INT_BASE;

	s2410IOP->rGPFDAT = ~(0xa << 4);   /* LED Off */
	OEMEmergencyPowerOff();
	while(1);
//	RETAILMSG(1, (TEXT(">>> OEMInterruptHandlerFIQ \r\n")));
}


int flag = 1;
unsigned int tCnt = 0;
unsigned int ttt = 0;



int OEMInterruptHandler(unsigned int ra) 
{
	static BYTE nLED = 0x1;
	volatile INTreg *s2410INT = (INTreg *)INT_BASE;
	volatile IOPreg *s2410IOP = (IOPreg *)IOP_BASE;
	volatile PWMreg *s2410PWM = (PWMreg *)PWM_BASE;
	volatile MMCreg *s2410SDIO = (MMCreg *)MMC_BACE;

	unsigned int IntPendVal;
	unsigned int SubIntPendVal;	// for serial
	DWORD			submask;

	// jylee
	volatile ADCreg *s2410ADC = (ADCreg *)ADC_BASE;

	static DWORD HeartBeatCnt, HeartBeatStat;
	static volatile struct udcreg *s2410USBD = (volatile struct udcreg *)(0xB1200140); // 0xB1200140
	volatile BYTE usbd_eir = 0, usbd_uir = 0;

    TOUCH_GLOBALS *odo_tsb;  //Sample buffer stuff
    // for this, You MUST modify bsp/inc/drv_glob.h.. check drv_glob.h_jylee
    odo_tsb = &((DRIVER_GLOBALS *)DRIVER_GLOBALS_PHYSICAL_MEMORY_START)->tch;

	// Update LEDs.
	//
//	if (nLED++ > 0xf) nLED = 0;
//	OEMWriteDebugLED(0, ~nLED);
    
	IntPendVal = s2410INT->rINTOFFSET;	// Get pending IRQ mode interrupt in INTPND.
    
	// Fake CPUEnterIdle needs to know about interrupt firing.
	fInterruptFlag = TRUE;

    if (fIntrTime) {
        //
        // We're doing interrupt timing. Get Time to ISR. We subtract TIMER_COUNTDOWN
        // here because the compare register has not been updated.
        //
        dwIsrTime1 = PerfCountSinceTick() - dwReschedIncrement;
        dwSPC = ra;
        wNumInterrupts++;
    }

	//
	// Check the timer interrupt.
	//
	if (IntPendVal == INTSRC_TIMER4) 
	{
		DWORD ttmp;

        if (++HeartBeatCnt > 10)
        {
            HeartBeatCnt   = 0;
            HeartBeatStat ^= 1;

            if (HeartBeatStat)                        
                s2410IOP->rGPFDAT &= ~(1 << 4); /* LED 0 On                 */
            else
                s2410IOP->rGPFDAT |=  (1 << 4); /* LED 0 Off                */
        }
                             
		s2410PWM->rTCNTB4 = dwReschedIncrement;
                             
		ttmp = s2410PWM->rTCON & (~(0xf << 20));
                             
		s2410PWM->rTCON = ttmp | (2 << 20);		/* update TCVNTB4, stop					*/
		s2410PWM->rTCON = ttmp | (1 << 20);		/* one-shot mode,  start				*/
                             
		// Update the tick counter.
		//
		CurTicks.QuadPart += dwReschedIncrement;
                                     
		// Call the profile ISR if it's enabled.
		//
        if (PProfileInterrupt)
        {
			DWORD dwRetVal = SYSINTR_NOP;

			dwRetVal = PProfileInterrupt();
            if (dwRetVal == SYSINTR_RESCHED)
			{
				// Update the millisecond counter.
				//
				CurMSec  += RESCHED_PERIOD;
#if (CE_MAJOR_VER == 0x0003)
                DiffMSec += RESCHED_PERIOD;
#endif
            }

			// Clear the interrupt
			//
			s2410INT->rSRCPND = BIT_TIMER4;        
			if (s2410INT->rINTPND & BIT_TIMER4) s2410INT->rINTPND = BIT_TIMER4;

            // Return whatever we got back from the profiling ISR.
			//
            return(dwRetVal);
        }

		// Update the millisecond counter.
		//
#if (CE_MAJOR_VER == 0x0003)
		DiffMSec += RESCHED_PERIOD;
#endif
		CurMSec  += RESCHED_PERIOD;

		//
		// Clear the interrupt
		//
		s2410INT->rSRCPND = BIT_TIMER4;        
		if (s2410INT->rINTPND & BIT_TIMER4) s2410INT->rINTPND = BIT_TIMER4;
                             		
		if (fIntrTime) 
		{
			//
			// We're doing interrupt timing. Every other tick is a RESCHED.
			//
			dwIntrTimeCountdown--;
                                                                          
			if (dwIntrTimeCountdown == 0) 
			{
				dwIntrTimeCountdown = dwIntrTimeCountdownRef;
				wNumInterrupts = 0;
                                                                              
				dwIsrTime2 = PerfCountSinceTick();
				return (SYSINTR_TIMING);
			} else {
#if (CE_MAJOR_VER == 0x0003)
				if (ticksleft || (dwSleepMin && (dwSleepMin <= DiffMSec)) || (dwPreempt && (dwPreempt <= DiffMSec)))
#else
				if ((int) (CurMSec - dwReschedTime) >= 0)
#endif
					return(SYSINTR_RESCHED);
			}    
		} else {
#if (CE_MAJOR_VER == 0x0003)
			if (ticksleft || (dwSleepMin && (DiffMSec >= dwSleepMin)) || (dwPreempt && (DiffMSec >= dwPreempt)))
#else
			if ((int) (CurMSec - dwReschedTime) >= 0)
#endif
                             
			{
				return(SYSINTR_RESCHED);
			}
			return(SYSINTR_NOP);
		}
	} 

	else if(IntPendVal == INTSRC_MMC)	// SD, MMC
	{
		s2410INT->rINTMSK |= BIT_MMC;
        s2410INT->rSRCPND = BIT_MMC;        
        if (s2410INT->rINTPND & BIT_MMC) s2410INT->rINTPND = BIT_MMC;
		//RETAILMSG(1, (TEXT("ARMINT.C-INT:INTSRC_MMC INT\r\n")));
		if( s2410SDIO->rSDIDATSTA & (0x1<<9) ){
			//RETAILMSG(1, (TEXT("INT:SYSINTR_SDMMC_SDIO_INTERRUPT INT\r\n")));
			return SYSINTR_SDMMC_SDIO_INTERRUPT;
		}
		else {
			//RETAILMSG(1, (TEXT("INT:SYSINTR_SDMMC INT\r\n")));
			return SYSINTR_SDMMC;
		}
	}	
	else if(IntPendVal == INTSRC_DMA0)	// SD DMA interrupt
	{
		s2410INT->rINTMSK |= BIT_DMA0;
		s2410INT->rSRCPND = BIT_DMA0;
		if (s2410INT->rINTPND & BIT_DMA0) s2410INT->rINTPND = BIT_DMA0;
		return SYSINTR_DMA0;
	}
	
	else if (IntPendVal == INTSRC_EINT1)	// Keyboard interrupt is connected to EINT1.
	{ 
		s2410INT->rINTMSK |= BIT_EINT1;
		s2410INT->rSRCPND  = BIT_EINT1;        
		if (s2410INT->rINTPND & BIT_EINT1) s2410INT->rINTPND  = BIT_EINT1;

		return(SYSINTR_KEYBOARD);

	} 
	
	else if (IntPendVal == INTSRC_EINT2)	// EINT2
	{ 
		s2410INT->rINTMSK |= BIT_EINT2;
		s2410INT->rSRCPND  = BIT_EINT2;	/* Interrupt Clear				*/
		if (s2410INT->rINTPND & BIT_EINT2) s2410INT->rINTPND  = BIT_EINT2;
//		RETAILMSG(1, (TEXT(">>> CPUPowerReset \r\n")));
		RETAILMSG(1,(TEXT(">>> >>> Reset Button Pressed <<< <<< \r\n")));
		CPUPowerReset();

		return(SYSINTR_POWER);
	}
	else if (IntPendVal == INTSRC_EINT3)	// PCMCIA interrupt is connected to EINT3. (nINT_P_DEV)
	{ 
   		s2410INT->rINTMSK |= BIT_EINT3;
   		s2410INT->rSRCPND  =  BIT_EINT3;        
   		if (s2410INT->rINTPND & BIT_EINT3) s2410INT->rINTPND = BIT_EINT3;
		//RETAILMSG(1, (TEXT("ARMINT.C - SYSINTR_PCMCIA_STATE\r\n")));			
                           
   		return(SYSINTR_PCMCIA_STATE);
	}  
	else if (IntPendVal == INTSRC_EINT8_23)		// EINT8 ~ 23
	{ 

		s2410INT->rINTMSK |= BIT_EINT8_23;	
		submask = s2410IOP->rEINTPEND;