Menu 'PCBMenu'
Begin
     Popup '文件(&F) {F}'
     Begin
          MenuItem '新建(&N)...'  'Client:CreateNewDocument(SingleDocument=True)'
          MenuItem '新建設計(&G)...'  Client:CreateNewDocument
          MenuItem '打開(&O)...'  Client:OpenDocument
          MenuItem '關閉(&C)'  Client:CloseDocument
          MenuItem '關閉設計(&D)'  Client:CloseProject
          MenuItem SEPARATOR
          MenuItem '導入(&I)...'  PCB:Import
          MenuItem '導出(&E)...'  PCB:Export
          MenuItem SEPARATOR
          MenuItem '保存(&S)'  Client:SaveDocument
          MenuItem '另存為(&A)'  'Client:SaveDocumentAs(Action=SaveAs)'
          MenuItem '保存復制件(&Y)'  Client:SaveDocumentAs
          MenuItem '全部保存(&L)'  Client:SaveAllDocuments
          MenuItem SEPARATOR
          MenuItem 'CAM 管理器(&M)'  CAMManager:DisplayCAMOutputs
          MenuItem '打印/預覽(&P)'  PCBPrint:PrintPreview
          MenuItem SEPARATOR
          MenuItem '退出(&X)'  Client:QuitFromEDAClient
     End
     Popup '編輯(&E){E}'
     Begin
          MenuItem SEPARATOR
          MenuItem '剪切(&T)\tCtrl+X'  PCB:Cut
          MenuItem '復制(&C)\tCtrl+C'  PCB:Copy
          MenuItem '粘貼(&P)\tCtrl+V'  PCB:Paste
          MenuItem '特殊粘貼(&A)...'  'PCB:Paste(Mode=Special)'
          MenuItem '清除(&L)\tCtrl+Del'  PCB:Clear
          MenuItem SEPARATOR
          Popup '選擇(&S){S}'
          Begin
               MenuItem '區域內(&I)'  'PCB:Select(Scope = InsideArea)'
               MenuItem '區域外(&O)'  'PCB:Select(Scope = OutsideArea)'
               MenuItem '全部(&A)'  'PCB:Select(Scope = All)'
               MenuItem SEPARATOR
               MenuItem '網絡(&N)'  'PCB:Select(Scope = Net)'
               MenuItem '連接的銅層(&P)'  'PCB:Select(Scope = ConnectedCopper)'
               MenuItem '物理連接(&C)'  'PCB:Select(Scope = PhysicalConnection)'
               MenuItem SEPARATOR
               MenuItem '層上全部(&Y)'  'PCB:Select(Scope = Layer)'
               MenuItem '可活動實體(&F)'  'PCB:Select(Scope = Free)'
               MenuItem '所有鎖定的(&K)'  'PCB:Select(Scope = Locked)'
               MenuItem '不在網格的焊盤(&G)'  'PCB:Select(Scope = OffGridPads)'
               MenuItem '孔徑(&H)...'  'Macro:RunMacro(DesignName=\system\templates.ddb | DocumentName=macros\HoleSize.bas | Language=ClientBasic)'
               MenuItem SEPARATOR
               MenuItem '連續選擇(&)'  PCB:ToggleSelection
          End
          Popup '撤消選擇(&E){X}'
          Begin
               MenuItem '區域內(&I)'  'PCB:DeSelect(Scope = InsideArea)'
               MenuItem '區域外(&O)'  'PCB:DeSelect(Scope = OutsideArea)'
               MenuItem '全部(&A)'  'PCB:DeSelect(Scope = All)'
               MenuItem SEPARATOR
               MenuItem '層上全部(&Y)'  'PCB:DeSelect(Scope = Layer)'
               MenuItem '可活動實體(&F)'  'PCB:DeSelect(Scope = Free)'
               MenuItem SEPARATOR
               MenuItem '連續選擇(&)'  PCB:ToggleSelection
          End
          MenuItem '疑問管理器(&Q)...'  Query:RunWizard
          MenuItem SEPARATOR
          MenuItem '刪除(&D'  'PCB:DeleteObjects(Object = Prompt)'
          MenuItem '修改(&H)'  PCB:ChangeObject
          Popup '移動(&M){M}'
          Begin
               MenuItem '移動(&M)'  PCB:MoveObject
               MenuItem '拖拽(&D)'  'PCB:MoveObject(Drag = True|$Description=Drag any object on the current document)'
               MenuItem '元件(&C)'  'PCB:MoveObject(Object = Component|Drag=True|$Description=Move or Drag components)'
               MenuItem SEPARATOR
               MenuItem '重布(&R)'  'PCB:MoveObject(Object=ReRoute|$Description=Re-Route track segments on the current document)'
               MenuItem '折斷連線(&B)'  PCB:BreakTrack
               MenuItem '拖拉端點(&E)'  'PCB:MoveObject(Object=TrackEnd|$Description=Drag connected track vertices on the current document)'
               MenuItem SEPARATOR
               MenuItem '移動選擇(&S)'  'PCB:MoveObject(Object = Selection|$Description=Move selected objects)'
               MenuItem '旋轉選擇(&O)'  PCB:RotateSelectedObjects
               MenuItem '翻轉選擇(&I)'  'PCB:FlipSelectedObjects(Axis=Horizontal)'
               MenuItem SEPARATOR
               MenuItem '多邊形頂點(&G)'  'PCB:MoveObject(Object = PolygonVertices|$Description=Move polygon vertices)'
               MenuItem '分割的內電層頂點(&)'  'PCB:MoveObject(Object = PolygonVertices|$Description=Move split plane vertices)'
          End
          MenuItem SEPARATOR
          Popup '原點(&O)'
          Begin
               MenuItem '設置(&S)'  PCB:SetOrigin
               MenuItem '復位(&R)'  PCB:ResetOrigin
          End
          Popup '跳轉(&J){J}'
          Begin
               MenuItem '絕對原點(&A)'  'PCB:Jump(Object = Absolute)'
               MenuItem '當前原點(&O)'  'PCB:Jump(Object = Relative)'
               MenuItem '新位置(&L)...'  'PCB:Jump(Object = Location)'
               MenuItem SEPARATOR
               MenuItem '元件(&C)...'  'PCB:Jump(Object = Component)'
               MenuItem '網絡(&N)...'  'PCB:Jump(Object = Net)'
               MenuItem '焊盤(&P)...'  'PCB:Jump(Object = Pad)'
               MenuItem '字符串(&S)...'  'PCB:Jump(Object = String)'
               MenuItem '錯誤標記(&E)'  'PCB:Jump(Object = DRCError)'
               MenuItem '選擇(&T)'  'PCB:Jump(Object = Selected)'
               MenuItem SEPARATOR
               Popup '位置標記(&M)'
               Begin
                    MenuItem '&1'  'PCB:Jump(Object = JumpToLocation1)'
                    MenuItem '&2'  'PCB:Jump(Object = JumpToLocation2)'
                    MenuItem '&3'  'PCB:Jump(Object = JumpToLocation3)'
                    MenuItem '&4'  'PCB:Jump(Object = JumpToLocation4)'
                    MenuItem '&5'  'PCB:Jump(Object = JumpToLocation5)'
                    MenuItem '&6'  'PCB:Jump(Object = JumpToLocation6)'
                    MenuItem '&7'  'PCB:Jump(Object = JumpToLocation7)'
                    MenuItem '&8'  'PCB:Jump(Object = JumpToLocation8)'
                    MenuItem '&9'  'PCB:Jump(Object = JumpToLocation9)'
                    MenuItem '1&0'  'PCB:Jump(Object = JumpToLocation10)'
               End
               Popup '設置位置標記'
               Begin
                    MenuItem '&1'  'PCB:Jump(Object = PlaceLocation1)'
                    MenuItem '&2'  'PCB:Jump(Object = PlaceLocation2)'
                    MenuItem '&3'  'PCB:Jump(Object = PlaceLocation3)'
                    MenuItem '&4'  'PCB:Jump(Object = PlaceLocation4)'
                    MenuItem '&5'  'PCB:Jump(Object = PlaceLocation5)'
                    MenuItem '&6'  'PCB:Jump(Object = PlaceLocation6)'
                    MenuItem '&7'  'PCB:Jump(Object = PlaceTLocation7)'
                    MenuItem '&8'  'PCB:Jump(Object = PlaceLocation8)'
                    MenuItem '&9'  'PCB:Jump(Object = PlaceLocation9)'
                    MenuItem '1&0'  'PCB:Jump(Object = PlaceLocation10)'
               End
          End
          MenuItem SEPARATOR
          MenuItem '導出到電子表格(&X)'  PCB_SS:Export
     End
     Popup '視圖(&V){V}'
     Begin
          MenuItem '適合文檔(&D)'  'PCB:Zoom(Action = All)'
          MenuItem '適合整板(&F)'  'PCB:Zoom(Action = Document)'
          MenuItem '區域(&A)'  'PCB:Zoom(Action = Area)'
          MenuItem '以點為中心(&P)'  'PCB:Zoom(Action = Point)'
          MenuItem '選中實體(&E)'  'PCB:Zoom(Action = Selected|$Description=Fit all selected objects in current view)'
          MenuItem SEPARATOR
          MenuItem '放大(&I)'  'PCB:Zoom(Action = In)'
          MenuItem '縮小(&O)'  'PCB:Zoom(Action = Out)'
          MenuItem '恢復上一次(&Z)'  'PCB:Zoom(Action = Last)'
          MenuItem '搖景(&N)'  'PCB:Zoom(Action = Pan)'
          MenuItem '刷新(&R)'  'PCB:Zoom(Action = Redraw)'
          MenuItem SEPARATOR
          MenuItem '3D顯示(&3)'  PCB3D:ViewPCB3D
          MenuItem SEPARATOR
          MenuItem '設計管理器(&M)'  Client:ToggleDocumentManager
          MenuItem '狀態欄(&S)'  Client:ToggleClientStatusBar
          MenuItem '命令狀態欄'  Client:ToggleProcessStatusBar
          Popup '工具條(&B){B}'
          Begin
               MenuItem '主工具條(&M)'  'Client:CustomizeResources(ToggleToolbar=PCBToolbar)'
               MenuItem '放置工具(&P)'  'Client:CustomizeResources(ToggleToolbar=PlacementTools)'
               MenuItem '元件放置(&M)'  'Client:CustomizeResources(ToggleToolbar=ComponentPlacement)'
               MenuItem '查找選擇(&F)'  'Client:CustomizeResources(ToggleToolbar=FindSelections)'
               MenuItem SEPARATOR
               MenuItem '定制(&C)'  'Client:CustomizeResources(Tab=Toolbars)'
          End
          MenuItem SEPARATOR
          Popup '連接(&C)'
          Begin
               MenuItem '顯示網絡(&N)'  'PCB:ShowConnections(Show = Net)'
               MenuItem '顯示元件網絡(&C)'  'PCB:ShowConnections(Show = ComponentNets)'
               MenuItem '全部顯示(&S)'  'PCB:ShowConnections(Show = All)'
               MenuItem SEPARATOR
               MenuItem '隱藏網絡'  'PCB:HideConnections(Hide = Net)'
               MenuItem '隱藏元件網絡'  'PCB:HideConnections(Hide = ComponentNets)'
               MenuItem '全部隱藏(&H)'  'PCB:HideConnections(Hide = All)'
          End
          MenuItem '公/英制轉換(&U)'  'PCB:DocumentPreferences(MeasurementUnit=Toggle)'
     End
     Popup '放置(&P) {P}'
     Begin
          MenuItem '圓心弧(&A)'  'PCB:PlaceArc($Description=Place arcs by center on the current document)'
          MenuItem '邊沿弧(&E)'  'PCB:PlaceArc(Method=Edge|$Description=Place arcs by edge on the current document)'
          MenuItem '任意角度弧(&N)'  'PCB:PlaceArc(Method=EdgeAnyAngle|$Description=Place any angle arcs by edge on the current document)'
          MenuItem '整圓(&U)'  'PCB:PlaceArc(Method=Circle|$Description=Place full circle arcs on the current document)'
          MenuItem SEPARATOR
          MenuItem '填充(&F)'  PCB:PlaceFill
          MenuItem '線(&L)'  'ManRoute:RunExternalManualRouter(mode = line|$Description=Place lines on the current document)'
          MenuItem '字符串(&S)'  PCB:PlaceString
          MenuItem '焊盤(&P)'  PCB:PlacePad
          MenuItem '過孔(&V)'  PCB:PlaceVia
          MenuItem '漢字'  'Macro:RunMacro(designname=\font.ddb|documentname=documents\font.bas|language=clientbasic)'
          MenuItem SEPARATOR
          MenuItem '交互方式布線(&T)'  'ManRoute:RunExternalManualRouter($Description=Interactively route connections)'
          MenuItem SEPARATOR
          MenuItem '元件(&C)...'  PCB:PlaceComponent
          MenuItem '坐標(&O)'  PCB:PlaceCoordinate
          MenuItem '尺寸(&D)'  PCB:PlaceDimension
          MenuItem SEPARATOR
          MenuItem '多邊形覆銅(&G)'  PCB:PlacePolygonPlane
          MenuItem '內電層分割(&I)'  PCB:PlaceSplitPlane
          MenuItem SEPARATOR
          Popup '保持層(&K){K}'
          Begin
               MenuItem '圓心弧(&A)'  'PCB:PlaceArc(Keepout=True|$Description=Place keepout arcs by center)'
               MenuItem '邊沿弧(&E)'  'PCB:PlaceArc(Method=Edge|Keepout=True|$Description=Place keepout arcs by edge)'
               MenuItem '任意角度弧(&N)'  'PCB:PlaceArc(Method=EdgeAnyAngle|Keepout=True|$Description=Place keepout arcs by edge, any angle)'
               MenuItem '整圓(&U)'  'PCB:PlaceArc(Method=Circle|Keepout=True|$Description=Place keepout circles)'
               MenuItem SEPARATOR
               MenuItem '填充(&F)'  'PCB:PlaceFill(Keepout=True|$Description=Place keepout fills)'
               MenuItem '線(&T)'  'ManRoute:RunExternalManualRouter(mode = line|Keepout=True|$Description=Place keepout tracks)'
          End
          MenuItem '&Room'  PCB:PlaceRoom
     End
     Popup '設計(&D) {D}'
     Begin
          MenuItem '規則(&R)'  PCB:EditRules
          MenuItem SEPARATOR
          MenuItem '加載網絡表(&N)'  PCB:Netlist
          MenuItem '網絡表管理器(&E)'  'PCB:Netlist(NetlistManager=True)'
          MenuItem '更新原理圖(&S)'  'EDS:SynchronizeDesign(Action = Backward)'
          MenuItem SEPARATOR
          MenuItem '層堆棧管理器(&K)'  'PCB:EditInternalPlanes(LayerStack=True)'
          MenuItem '內電層分割(&I)'  PCB:EditInternalPlanes