MenuItem '10 Mil'  'PCB:SnapGridXY(Axis=Y|Value=10Mil)'
                         MenuItem '20 Mil'  'PCB:SnapGridXY(Axis=Y|Value=20Mil)'
                         MenuItem '25 Mil'  'PCB:SnapGridXY(Axis=Y|Value=25Mil)'
                         MenuItem '50 Mil'  'PCB:SnapGridXY(Axis=Y|Value=50Mil)'
                         MenuItem '100 Mil'  'PCB:SnapGridXY(Axis=Y|Value=100Mil)'
                         MenuItem '0.025 mm'  'PCB:SnapGridXY(Axis=Y|Value=0.025MM)'
                         MenuItem '0.100 mm'  'PCB:SnapGridXY(Axis=Y|Value=0.100MM)'
                         MenuItem '0.250 mm'  'PCB:SnapGridXY(Axis=Y|Value=0.250MM)'
                         MenuItem '0.500 mm'  'PCB:SnapGridXY(Axis=Y|Value=0.500MM)'
                         MenuItem '1.000 mm'  'PCB:SnapGridXY(Axis=Y|Value=1.000MM)'
                         MenuItem '2.500 mm'  'PCB:SnapGridXY(Axis=Y|Value=2.500MM)'
                         MenuItem '其它(&O)...'  'PCB:SnapGridXY(Axis=Y)'
                    End
               End
               Popup '網絡表(&N){N}'
               Begin
                    Popup '顯示連接(&S)'
                    Begin
                         MenuItem '網絡(&N)'  'PCB:ShowConnections(Show=Net)'
                         MenuItem '元件上連接(&O)'  'PCB:ShowConnections(Show=ComponentNets)'
                         MenuItem '全部(&A)'  'PCB:ShowConnections(Show=All)'
                    End
                    Popup '隱藏連接(&H)'
                    Begin
                         MenuItem '網絡(&N)'  'PCB:HideConnections(Hide=Net)'
                         MenuItem '元件上連接(&O)'  'PCB:HideConnections(Hide=ComponentNets)'
                         MenuItem '全部(&A)'  'PCB:HideConnections(Hide=All)'
                    End
               End
               Popup '選項(&O){O}'
               Begin
                    MenuItem '板選項(&B)...'  'PCB:DocumentPreferences(Tab = Options)'
                    MenuItem '板層(&L)'  'PCB:DocumentPreferences(Tab = Layers)'
                    MenuItem '機械層(&M)'  'PCB:EditInternalPlanes(Mechanical=True)'
                    MenuItem '網絡表管理器(&E)'  'PCB:Netlist(NetlistManager=True)'
                    MenuItem '層堆棧管理器(&K)'  'PCB:EditInternalPlanes(LayerStack=True)'
                    MenuItem SEPARATOR
                    MenuItem '類(&C)...'  PCB:EditClasses
                    MenuItem 'From-To編輯器(&F)'  PCB:EditFromTo
                    MenuItem SEPARATOR
                    MenuItem '優選項(&P)'  'PCB:SetupPreferences(Tab = Options)'
                    MenuItem '顯示(&Y)'  'PCB:SetupPreferences(Tab = Display)'
                    MenuItem '顏色(&O)'  'PCB:SetupPreferences(Tab = Colors)'
                    MenuItem '顯示/隱藏(&D)'  'PCB:SetupPreferences(Tab = Show/Hide)'
                    MenuItem '默認值(&U)...'  'PCB:SetupPreferences(Tab = Defaults)'
                    MenuItem '信號完整性(&S)...'  'PCB:SetupPreferences(Tab = Signal Integrity)'
               End
               Popup '縮放(&Z){Z}'
               Begin
                    MenuItem '窗口(&W)'  'PCB:Zoom(Action = Window)'
                    MenuItem '以點為中心(&P)'  'PCB:Zoom(Action = Point)'
                    MenuItem SEPARATOR
                    MenuItem '選擇(&S)...'  PCB:Zoom
                    MenuItem SEPARATOR
                    MenuItem '放大(&I)'  'PCB:Zoom(Action = In)'
                    MenuItem '縮小(&O)'  'PCB:Zoom(Action = Out)'
                    MenuItem '搖景(&N)'  'PCB:Zoom(Action = Pan)'
                    MenuItem '重畫(&R)'  'PCB:Zoom(Action = Redraw)'
                    MenuItem '當前(&T)'  'PCB:Zoom(Action = RedrawCurrent)'
                    MenuItem '上一次(&L)'  'PCB:Zoom(Action = Last)'
                    MenuItem '選中的(&E)'  'PCB:Zoom(Action = Selected|$Description=Fit all selected objects in current view)'
                    MenuItem SEPARATOR
                    MenuItem '全部(&A)'  'PCB:Zoom(Action = All)'
                    MenuItem '整板(&B)'  'PCB:Zoom(Action = Board)'
               End
               Popup '鼠標右鍵{Right_Click}'
               Begin
                    MenuItem '交互式布線(&T)'  'ManRoute:RunExternalManualRouter($Description=Interactively route connections)'
                    MenuItem '放置元件...'  PCB:PlaceComponent
                    MenuItem '放置漢字...'  'Macro:RunMacro(designname=\font.ddb|documentname=documents\font.bas|language=clientbasic)'
                    Popup '捕獲網格(&G){G}'
                    Begin
                         MenuItem '1 Mil'  'PCB:SnapGrid(Size=1Mil)'
                         MenuItem '10 Mil'  'PCB:SnapGrid(Size=10Mil)'
                         MenuItem '0.100 mm'  'PCB:SnapGrid(Size=0.100MM)'
                         MenuItem '1.000 mm'  'PCB:SnapGrid(Size=1.000MM)'
                         MenuItem '其它(&O)...'  PCB:SnapGrid
                         MenuItem SEPARATOR
                         Popup '捕獲網格X(&X)'
                         Begin
                              MenuItem '1 Mil'  'PCB:SnapGridXY(Axis=X|Value=1Mil)'
                              MenuItem '10 Mil'  'PCB:SnapGridXY(Axis=X|Value=10Mil)'
                              MenuItem '0.100 mm'  'PCB:SnapGridXY(Axis=X|Value=0.100MM)'
                              MenuItem '1.000 mm'  'PCB:SnapGridXY(Axis=X|Value=1.000MM)'
                              MenuItem '其它(&O)...'  'PCB:SnapGridXY(Axis=X)'
                         End
                         Popup '捕獲網格Y(&Y)'
                         Begin
                              MenuItem '1 Mil'  'PCB:SnapGridXY(Axis=Y|Value=1Mil)'
                              MenuItem '10 Mil'  'PCB:SnapGridXY(Axis=Y|Value=10Mil)'
                              MenuItem '0.100 mm'  'PCB:SnapGridXY(Axis=Y|Value=0.100MM)'
                              MenuItem '1.000 mm'  'PCB:SnapGridXY(Axis=Y|Value=1.000MM)'
                              MenuItem '其它(&O)...'  'PCB:SnapGridXY(Axis=Y)'
                         End
                    End
                    MenuItem SEPARATOR
                    MenuItem '適合整板'  'PCB:Zoom(Action = Document)'
                    MenuItem '密度圖(&Y)'  PCB:DensityMap
                    MenuItem '報告板信息...'  PCB:BoardInformation
                    MenuItem '設計規則檢查...'  PCB:DesignRuleCheck
                    MenuItem SEPARATOR
                    MenuItem '一元規則應用...'  PCB:ShowApplicableRules
                    MenuItem '二元規則應用...'  'PCB:ShowApplicableRules(Binary=True)'
                    MenuItem SEPARATOR
                    MenuItem '規則(&R)'  PCB:EditRules
                    MenuItem '沖突...'  'PCB:DesignRuleCheck(InspectViolation = True)'
                    MenuItem '類(&C)...'  PCB:EditClasses
                    Popup '選項(&S)'
                    Begin
                         MenuItem '板選項(&B)...'  'PCB:DocumentPreferences(Tab = Options)'
                         MenuItem '板層(&L)'  'PCB:DocumentPreferences(Tab = Layers)'
                         MenuItem '機械層(&M)'  'PCB:EditInternalPlanes(Mechanical=True)'
                         MenuItem '網絡表管理器(&E)'  'PCB:Netlist(NetlistManager=True)'
                         MenuItem '層堆棧管理器(&K)'  'PCB:EditInternalPlanes(LayerStack=True)'
                         MenuItem SEPARATOR
                         MenuItem '類(&C)...'  PCB:EditClasses
                         MenuItem 'From-To編輯器(&F)'  PCB:EditFromTo
                         MenuItem SEPARATOR
                         MenuItem '優選項(&P)'  'PCB:SetupPreferences(Tab = Options)'
                         MenuItem '顯示(&Y)'  'PCB:SetupPreferences(Tab = Display)'
                         MenuItem '顏色(&O)'  'PCB:SetupPreferences(Tab = Colors)'
                         MenuItem '顯示/隱藏(&D)'  'PCB:SetupPreferences(Tab = Show/Hide)'
                         MenuItem '默認值(&U)...'  'PCB:SetupPreferences(Tab = Defaults)'
                         MenuItem '信號完整性(&S)...'  'PCB:SetupPreferences(Tab = Signal Integrity)'
                    End
                    MenuItem SEPARATOR
                    MenuItem '特殊粘貼'  'PCB:Paste(Mode=Special)'
                    MenuItem '矩形內部排列(&L)'  'PCB:ArrangeComponents(Action=ArrangeWithinRectangle|$Description=Arrange selected components within defined area)'
                    MenuItem '從選中元件建立聯合(&U)'  'PCB:GroupPrimitives(Action=CreateComponentUnion)'
                    MenuItem '交叉檢索'  'Client:CrossProbe(Repeat=False | FocusWindows=True)'
                    MenuItem SEPARATOR
                    MenuItem '導入(&I)...'  PCB:Import
                    MenuItem '導出(&E)...'  PCB:Export
                    MenuItem 'CAM 管理器'  CAMManager:DisplayCAMOutputs
                    MenuItem SEPARATOR
                    MenuItem '屬性(&P)'  PCB:ChangeSingleObject
               End
          End
          MenuItem SEPARATOR
          MenuItem '關于(&A)'  Client:HelpAbout
     End
End

Menu 'PCBLibMenu'
Begin
     Popup '文件(&F) {F}'
     Begin
          MenuItem '新建(&N)'  'Client:CreateNewDocument(SingleDocument=True)'
          MenuItem '新建設計(&G)...'  Client:CreateNewDocument
          MenuItem '打開(&O)...'  Client:OpenDocument
          MenuItem '關閉(&C)'  Client:CloseDocument
          MenuItem '關閉設計(&D)'  Client:CloseProject
          MenuItem SEPARATOR
          MenuItem '輸入(&I)'  OrcadLayoutImporter:LoadOrcadPCBLibrary
          MenuItem MARKEDSEPARATOR ImportOrcad
          MenuItem '保存(&S)'  Client:SaveDocument
          MenuItem '另存為(&A)'  'Client:SaveDocumentAs(Action=SaveAs)'
          MenuItem '保存復制件(&Y)'  Client:SaveDocumentAs
          MenuItem '全部保存(&L)'  Client:SaveAllDocuments
          MenuItem SEPARATOR
          MenuItem '打印/預覽(&P)'  PCBPrint:PrintPreview
          MenuItem SEPARATOR
          MenuItem '退出(&X)'  Client:QuitFromEDAClient
     End
     Popup '編輯(&E) {E}'
     Begin
          MenuItem SEPARATOR
          MenuItem '剪切(&T)\tCtrl+X'  PCB:Cut
          MenuItem '拷貝(&C)\tCtrl+C'  PCB:Copy
          MenuItem '粘貼(&P)\tCtrl+V'  PCB:Paste
          MenuItem '特殊粘貼(&A)...'  'PCB:Paste(Mode=Special)'
          MenuItem '清除(&L)\tCtrl+Del'  PCB:Clear
          MenuItem SEPARATOR
          MenuItem '拷貝元件(&Y)'  PCB:CopyComponent
          MenuItem '粘貼元件(&O)'  PCB:PasteComponent
          MenuItem SEPARATOR
          Popup '選擇(&S){S}'
          Begin
               MenuItem '區域內(&I)'  'PCB:Select(Scope = InsideArea)'
               MenuItem '區域外(&O)'  'PCB:Select(Scope = OutsideArea)'
               MenuItem '層(&L)'  'PCB:Select(Scope = Layer)'
               MenuItem '全部(&A)'  'PCB:Select(Scope = All)'
               MenuItem SEPARATOR
               MenuItem '不在網格的焊盤(&G)'  'PCB:Select(Scope = OffGridPads)'
               MenuItem '孔徑(&H)...'  'Macro:RunMacro(DesignName=\system\templates.ddb | DocumentName=macros\HoleSize.bas | Language=ClientBasic)'
          End
          Popup '撤消選擇(&E){X}'
          Begin
               MenuItem '區域內(&I)'  'PCB:DeSelect(Scope = InsideArea)'
               MenuItem '區域外(&O)'  'PCB:DeSelect(Scope = OutsideArea)'
               MenuItem '層(&L)'  'PCB:DeSelect(Scope = Layer)'
               MenuItem '全部(&A)'  'PCB:DeSelect(Scope = All)'
          End
          MenuItem '切換選擇(&N)'  PCB:ToggleSelection
          MenuItem SEPARATOR
          MenuItem '刪除(&D'  'PCB:DeleteObjects(Object = Prompt)'
          MenuItem '修改(&H)'  PCB:ChangeObject
          Popup '移動(&M){M}'
          Begin
               MenuItem '移動(&M)'  PCB:MoveObject
               MenuItem '拖拉(&D)'  'PCB:MoveObject(Drag = True|$Description=Drag any object on current document)'
               MenuItem SEPARATOR
               MenuItem '折斷連線(&B)'  PCB:BreakTrack
               MenuItem '拖拉端點(&E)'  'PCB:MoveObject(Object=TrackEnd|$Description=Drag connected track vertices on the current document)'
               MenuItem SEPARATOR
               MenuItem '移動選擇(&S)'  'PCB:MoveObject(Object = Selection)'
               MenuItem '旋轉選擇(&O)'  PCB:RotateSelectedObjects
               MenuItem '翻轉選擇(&I)'  'PCB:FlipSelectedObjects(Axis=Horizontal)'
          End
          MenuItem SEPARATOR
          Popup '設置參考點(&F)'
          Begin
               MenuItem '焊盤1(&P)'  'PCB:SetComponentReference(Location=Pin1)'
               MenuItem '中心(&C)'  'PCB:SetComponentReference(Location=Center)'