/* * (C) Copyright 2004, Li-Pro.Net <www.li-pro.net> * Stephan Linz <linz@li-pro.net> * * See file CREDITS for list of people who contributed to this * project. * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License as * published by the Free Software Foundation; either version 2 of * the License, or (at your option) any later version. * * This program is distributed in the hope that it will be useful, * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License * along with this program; if not, write to the Free Software * Foundation, Inc., 59 Temple Place, Suite 330, Boston, * MA 02111-1307 USA */#include <common.h>#include <nios-io.h>#include <spi.h>#if	defined(CONFIG_HW_WATCHDOG)extern void ssv_wd_pio_init(void);	/* comes from ../common/wd_pio.c					   included by ./misc.c */#endifvoid _default_hdlr (void){	printf ("default_hdlr\n");}int board_early_init_f (void){#if	defined(CONFIG_HW_WATCHDOG)	ssv_wd_pio_init();#endif	return 0;}int checkboard (void){	puts (	"Board: SSV DilNetPC ADNP/ESC1"#if	defined(CONFIG_DNPEVA2)		" on DNP/EVA2"#endif		"\n");#if     defined(CONFIG_NIOS_BASE_32)	puts ("Conf.: SSV Base 32 (nios_32)\n");#endif	return 0;}long int initdram (int board_type){	return (0);}/* * The following are used to control the SPI chip selects for the SPI command. */#if (CONFIG_COMMANDS & CFG_CMD_SPI) && CONFIG_NIOS_SPI#define	SPI_RTC_CS_MASK	0x00000001void spi_rtc_chipsel(int cs){	nios_spi_t *spi = (nios_spi_t *)CFG_NIOS_SPIBASE;	if (cs)		spi->slaveselect = SPI_RTC_CS_MASK;	/* activate (1) */	else		spi->slaveselect = 0;			/* deactivate (0) */}/* * The SPI command uses this table of functions for controlling the SPI * chip selects: it calls the appropriate function to control the SPI * chip selects. */spi_chipsel_type spi_chipsel[] = {	spi_rtc_chipsel};int spi_chipsel_cnt = sizeof(spi_chipsel) / sizeof(spi_chipsel[0]);#endif /* CFG_CMD_SPI */#if	defined(CONFIG_POST)/* * Returns 1 if keys pressed to start the power-on long-running tests * Called from board_init_f(). */int post_hotkeys_pressed(void){	return 0;       /* No hotkeys supported */}#endif /* CONFIG_POST */