?? zlg85c30.h
字號:
#ifndef ZLG85C30_H
#define ZLG85C30_H
#include "..\sysparams.h"
#define GetTxBufNByte 1
#define GetTxBufFreeBytes 2
#define GetRxBufNByte 3
#define GetRxBufFreeBytes 4
#define ComMaxUnit 14
#define ComMaxData 1600
#define com13_dataport 0x3f8
#define com14_dataport 0x2f8
#define com_dataport 0
#define com_intenable 1
#define com_intflag 2
#define com_lineclt 3
#define com_modemclt 4
#define com_lineflag 5
#define com_modemflag 6
#define com_brlsb 0
#define com_brmsb 1
#define IIR_RDA 0x04 /* received data available */
#define IIR_THRE 0x02 /* transmit holding register empty */
#define IIR_TIMEOUT 0x0c /* char receiv tiemout */
#define RxFIFO_BIT 0x01
#define TxFIFO_BIT 0x02
#define MCR_DTR 0x01 /* dtr output */
#define MCR_RTS 0x02 /* rts output */
#define MCR_OUT1 0x04 /* output #1 */
#define MCR_OUT2 0x08 /* output #2 */
#define MSR_CTS 0x10 /* complement of cts */
#define MSR_DCD 0x80
#define Flag_Send_Enable 0x01
#define Flag_Rcev_Enable 0x02
#define com2_commandport 0x2d2
#define com2_dataport 0x2d3
#define com1_commandport 0x2d0
#define com1_dataport 0x2d1
#define com4_commandport 0x2d6
#define com4_dataport 0x2d7
#define com3_commandport 0x2d4
#define com3_dataport 0x2d5
#define com6_commandport 0x2da
#define com6_dataport 0x2db
#define com5_commandport 0x2d8
#define com5_dataport 0x2d9
#define com8_commandport 0x2de
#define com8_dataport 0x2df
#define com7_commandport 0x2dc
#define com7_dataport 0x2dd
#define com10_commandport 0x2e2
#define com10_dataport 0x2e3
#define com9_commandport 0x2e0
#define com9_dataport 0x2e1
#define com12_commandport 0x2e6
#define com12_dataport 0x2e7
#define com11_commandport 0x2e4
#define com11_dataport 0x2e5
#define clock_f 7372800
#define intcommand1 0x20
#define intcommand2 0xa0
#define intmask1 0x21
#define intmask2 0xa1
struct PortSetTable
{
char portName[10];
int unit;
int commandport;
int dataport;
int sync_async;/*0:async; 1:sync*/
//int dltype;
unsigned long baudRate;
int clockType; /*0:DPLL; 1:Iclock; 2:Oclock;*/
int stopBit;
int dataBit;
int checktype; /*0:None; 1:ODD; 2:EVEN*/
unsigned char intLevel;
int flag;
unsigned int intNum;
unsigned int RevByteNum;
unsigned int RevFrameNum;
unsigned int SendByteNum;
unsigned int SendFrameNum;
unsigned int RevFrameErrorNum;
int open;
//unsigned char intVectorStatic[ComMaxData];
//unsigned int pintVectorStatic;
};
extern struct PortSetTable portconfig[ComMaxUnit];
extern int dataAddr[ComMaxUnit];
extern int commandAddr[ComMaxUnit];
extern int portsending[ComMaxUnit];
extern int Zlg85C30Debugstatus;
extern struct SysCmdFormat_T usrPortParams[ComMaxUnit];
#endif
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -