?? 1.lst
字號:
Sunplus u'nSP Assembler - Ver. 1.10.0
Listing File Has Been Relocated
.include hardware.inc
< //========================================================================================
< // Progarm: The file be included by modules
< // Arranged by: Andy Hsu
< // Date: 2000/06/23: first version
< // 2000/07/24: modified
< // 2000/10/20: modified for version 52A
< //========================================================================================
< //////////////////////////////////////////////////////////////////
< // Definitions for I/O Port
< //////////////////////////////////////////////////////////////////
< .DEFINE P_IOA_Data 0x7000; // Write Data into data register and read from IOA pad
< .DEFINE P_IOA_Buffer 0x7001; // Write Data into buffer register and read from buffer register
< .DEFINE P_IOA_Dir 0x7002; // Direction vector for IOA
< .DEFINE P_IOA_Attrib 0x7003; // Attribute vector for IOA
< .DEFINE P_IOA_Latch 0x7004; // Latch PortA data for key change wake-up
<
< .DEFINE P_IOB_Data 0x7005; // Write Data into the data register and read from IOB pad
< .DEFINE P_IOB_Buffer 0x7006; // Write Data into buffer register and read from buffer register
< .DEFINE P_IOB_Dir 0x7007; // Direction vector for IOB
< .DEFINE P_IOB_Attrib 0x7008; // Attribute vector for IOB
<
< .DEFINE P_FeedBack 0x7009; // Clock form external R,C
< .DEFINE P_TimerA_Data 0x700A; // Data port for TimerA
< .DEFINE P_TimerA_Ctrl 0x700B; // Control Port for TimerA
< .DEFINE P_TimerB_Data 0x700C; // Data port for TimerB
< .DEFINE P_TimerB_Ctrl 0x700D; // Control Port for TimerB
< .DEFINE P_TimeBase_Setup 0x700E; // TimerBase Freq. Set
< .DEFINE P_TimeBase_Clear 0x700F; // Reset Timerbase counter
< .DEFINE P_INT_Ctrl 0x7010; // Control port for interrupt source
< .DEFINE P_INT_Clear 0x7011; // Clear interrupt source
< .DEFINE P_Watchdog_Clear 0x7012; // Watchdog Reset
< .DEFINE P_SystemClock 0x7013; // Change system clock frequency(include go to standby mode)
<
< //... PA6442 Old version (for EC-02) ...........
< //.DEFINE P_ADDA 0x7014; //10-bit DA(W) AD(R)
< //.DEFINE P_DAC1 0x7014; //
< //.DEFINE P_AD_Ctrl 0x7015; //AD/DA control
< //.DEFINE P_AD_Status 0x7015; //AD status
< //.DEFINE P_DAC2 0x7016; //DAC channel 2
< //.DEFINE P_PWM 0x7016; //PWM output
< //.DEFINE P_DA_Ctrl 0x7017; //DAC latch control
<
< //... PA6442 New version MC52A (For EC-03)....
< .DEFINE P_ADC 0x7014; // Data Port for AD
< .DEFINE P_ADC_Ctrl 0x7015; // Control Port for AD control
< //.DEFINE P_ADC_Status 0x7015; // AD Port Status
< .DEFINE P_DAC2 0x7016; // Data Port for DAC2
< //.DEFINE P_PWM 0x7016; // Data Port for PWM
< .DEFINE P_DAC1 0x7017; // Data Port for DAC1
< .DEFINE P_DAC_Ctrl 0x702A; // Control Port for two DAC and audio output mode
< //............................................
<
< //.DEFINE P_IR_Ctrl 0x7018; // Control Port for IR
< .DEFINE P_LVD_Ctrl 0x7019; // Control Port for LVD
<
< .DEFINE P_SIO_Addr_Low 0x701B; // Address Port low
< .DEFINE P_SIO_Addr_Mid 0x701C; // Address Port middle
< .DEFINE P_SIO_Addr_High 0x701D; // Address Port high
< .DEFINE P_SIO_Ctrl 0x701E; // Control Port
< .DEFINE P_SIO_Start 0x701F; // Start port for serial interface
< .DEFINE P_SIO_Stop 0x7020; // Stop port for serial interface
<
< .DEFINE P_UART_Command1 0x7021; // Command1 Port for UART
< .DEFINE P_UART_Command2 0x7022; // Command2 Port for UART
< .DEFINE P_UART_Data 0x7023; // Data Port for UART
< .DEFINE P_UART_BaudScalarLow 0x7024; // Set Baud Rate scalar low
< .DEFINE P_UART_BaudScalarHigh 0x7025; // Set Baud Rate scalar high
<
<
< //... Definitions for P_INT_Ctrl ..............
< .DEFINE C_IRQ6_TMB2 0x0001; // Timer B IRQ6
< .DEFINE C_IRQ6_TMB1 0x0002; // Timer A IRQ6
< .DEFINE C_IRQ5_2Hz 0x0004; // 2Hz IRQ5
< .DEFINE C_IRQ5_4Hz 0x0008; // 4Hz IRQ5
< .DEFINE C_IRQ4_1KHz 0x0010; // 1024Hz IRQ4
< .DEFINE C_IRQ4_2KHz 0x0020; // 2048Hz IRQ4
< .DEFINE C_IRQ4_4KHz 0x0040; // 4096Hz IRQ4
< .DEFINE C_IRQ3_KEY 0x0080; // Key Change IRQ3
< .DEFINE C_IRQ3_EXT1 0x0100; // Ext1 IRQ3
< .DEFINE C_IRQ3_EXT2 0x0200; // Ext2 IRQ3
< .DEFINE C_IRQ2_TMB 0x0400; // Timer B IRQ2
< .DEFINE C_FIQ_TMB 0x0800; // Timer B FIQ
< .DEFINE C_IRQ1_TMA 0x1000; // Timer A IRQ1
< .DEFINE C_FIQ_TMA 0x2000; // Timer A FIQ
< .DEFINE C_IRQ0_PWM 0x4000; // PWM IRQ0
< .DEFINE C_FIQ_PWM 0x8000; // PWM FIQ
<
< // Definitions for P_TimerA/B_Ctrl ............
< .DEFINE C_Fosc_2 0x0000; //
< .DEFINE C_Fosc_256 0x0001; //
< .DEFINE C_32768Hz 0x0002; //
< .DEFINE C_8192Hz 0x0003; //
< .DEFINE C_4096Hz 0x0004; //
< .DEFINE C_A1 0x0005; //
< .DEFINE C_A0 0x0006; //
< .DEFINE C_Ext1 0x0007; //
<
< .DEFINE C_2048Hz 0x0000; //
< .DEFINE C_1024Hz 0x0008; //
< .DEFINE C_256Hz 0x0010; //
< .DEFINE C_TMB1Hz 0x0018; //
< .DEFINE C_4Hz 0x0020; //
< .DEFINE C_2Hz 0x0028; //
< .DEFINE C_B1 0x0030; //
< .DEFINE C_Ext2 0x0038; //
<
< .DEFINE C_Off 0x0000; //
< .DEFINE C_D1 0x0040; //
< .DEFINE C_D2 0x0080; //
< .DEFINE C_D3 0x00C0; //
< .DEFINE C_D4 0x0100; //
< .DEFINE C_D5 0x0140; //
< .DEFINE C_D6 0x0180; //
< .DEFINE C_D7 0x01C0; //
< .DEFINE C_D8 0x0200; //
< .DEFINE C_D9 0x0240; //
< .DEFINE C_D10 0x0280; //
< .DEFINE C_D11 0x02C0; //
< .DEFINE C_D12 0x0300; //
< .DEFINE C_D13 0x0340; //
< .DEFINE C_D14 0x0380; //
< .DEFINE C_TA_Div_2 0x03C0; // Timer A
< .DEFINE C_TB_Div_2 0x03C0; // Timer B
<
< //... Definition for P_SystemClock ............
< .DEFINE C_Fosc 0x0000; // b3..b0
< .DEFINE C_Fosc_Div_2 0x0001; //
< .DEFINE C_Fosc_Div_4 0x0002; //
< .DEFINE C_Fosc_Div_8 0x0003; // (default)
< .DEFINE C_Fosc_Div_16 0x0004; //
< .DEFINE C_Fosc_Div_32 0x0005; //
< .DEFINE C_Fosc_Div_64 0x0006; //
< .DEFINE C_Sleep 0x0007; //
<
< .DEFINE C_32K_Work 0x0000; // b4
< .DEFINE C_32K_Off 0x0000; //
< .DEFINE C_StrongMode 0x0000; // b5
< .DEFINE C_AutoMode 0x0000; //
<
< //... Define for P_AD_Ctrl ....................
< .DEFINE C_AD 0x0001; //
< .DEFINE C_DA 0x0000; //
< .DEFINE C_MIC 0x0000; //
< .DEFINE C_LINE 0x0002; //
<
< //... Define for P_DA_Ctrl ....................
< .DEFINE C_PushPull 0x0000; // b0, (default)
< .DEFINE C_DoubleEnd 0x0001; // b0
< .DEFINE C_DAC_Mode 0x0000; // b1, (default)
< .DEFINE C_PWM_Mode 0x0002; // b1
<
< .DEFINE C_D1_Direct 0x0000; // DAC1 latch
< .DEFINE C_D1_LatchA 0x0008; //
< .DEFINE C_D1_LatchB 0x0010; //
< .DEFINE C_D1_LatchAB 0x0018; //
<
< .DEFINE C_D2_Direct 0x0000; // DAC2 latch
< .DEFINE C_D2_LatchA 0x0020; //
< .DEFINE C_D2_LatchB 0x0040; //
< .DEFINE C_D2_LatchAB 0x00C0; //
<
< //... Define for P_LVD_Ctrl ...................
< .DEFINE C_LVD24V 0x0000; // LVD = 2.4V
< .DEFINE C_LVD28V 0x0001; // LVD = 2.8V
< .DEFINE C_LVD32V 0x0002; // LVD = 3.2V
< .DEFINE C_LVD36V 0x0003; // LVD = 3.6V
<
<
< .EXTERNAL F_SP_Read_INT_Status; // for further use
< .EXTERNAL F_SP_Write_INT_Status; // for further use
< .EXTERNAL F_SP_Set_INT_Vector; // for further use
< .EXTERNAL F_SP_Clear_INT_Vector; // for further use
<
< .EXTERNAL F_SP_Send_Out; //
< .EXTERNAL F_SP_Send_DAC1; //
< .EXTERNAL F_SP_Send_DAC2; //
< .EXTERNAL F_SP_Send_Two_DAC; //
< .EXTERNAL F_SP_Init_HW; //
<
< .EXTERNAL R_InterruptStatus;
<
<
< .EXTERNAL F_SP_RampUpDAC1;
< .EXTERNAL F_SP_RampDnDAC1;
< .EXTERNAL F_SP_RampUpDAC2;
< .EXTERNAL F_SP_RampDnDAC2;
<
< .EXTERNAL F_SP_InitQueue;
< .EXTERNAL F_SP_ReadQueue;
< .EXTERNAL F_SP_WriteQueue;
< .EXTERNAL F_SP_TestQueue;
<
<
<
< .EXTERNAL F_SP_Get_ADC
<
< .EXTERNAL F_SP_Set_P_TimerA_Ctrl
< .EXTERNAL F_SP_Set_P_TimerA_Data
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -