?? lcd.c
字號:
Glib_Line(0+320,239,319+320,0,255);
// 00
// #0
Glib_Rectangle(0,0+240,319,239+240,255);
Glib_Line(0,0+240,319,239+240,255);
Glib_Line(0,239+240,319,0+240,255);
// 00
// 0#
Glib_Rectangle(0+320,0+240,319+320,239+240,255);
Glib_Line(0+320,0+240,319+320,239+240,255);
Glib_Line(0+320,239+240,319+320,0+240,255);
Glib_Rectangle(50+320,50+240,269+320,189+240,255);
Uart_Printf("TFT 256 color mode test 4. Press any key!\n");
Uart_Getch();
Glib_ClearScr(0, MODE_TFT_8BIT_640480);
k=0;
for(i=320;i<960;i+=40)
for(j=240;j<720;j+=30)
{
Glib_FilledRectangle(i,j,i+39,j+29,(k%256));
k++;
}
// #0
// 00
Glib_Rectangle(0,0,639,479,255);
Glib_Line(0,0,639,479,255);
Glib_Line(0,479,639,0,255);
// 0#
// 00
Glib_Rectangle(0+640,0,639+640,479,255);
Glib_Line(0+640,0,639+640,479,255);
Glib_Line(0+640,479,639+640,0,255);
// 00
// #0
Glib_Rectangle(0,0+480,639,479+480,255);
Glib_Line(0,0+480,639,479+480,255);
Glib_Line(0,479+480,639,0+480,255);
// 00
// 0#
Glib_Rectangle(0+640,0+480,639+640,479+480,255);
Glib_Line(0+640,0+480,639+640,479+480,255);
Glib_Line(0+640,479+480,639+640,0+480,255);
Glib_Rectangle(50+640,50+480,639+640-50,479+480-50,255);
Uart_Printf("Virtual Screen Test(TFT 256 color). Press any key[ijkm\\r]!\n");
MoveViewPort(MODE_TFT_8BIT_640480);
Lcd_MoveViewPort(0,0,MODE_TFT_8BIT_640480);
Lcd_EnvidOnOff(0);
Lcd_Port_Return();
}
void Test_Lcd_Tft_8Bit_640480_Palette(void)
{
int i,j,k;
unsigned char cdata, p_red, p_green, p_blue;
U32 *palette;
Lcd_Palette8Bit_Init();
Lcd_Port_Init();
Lcd_Init(MODE_TFT_8BIT_640480);
Glib_Init(MODE_TFT_8BIT_640480);
Uart_Printf("[TFT 256 COLOR(8bit/1pixel) Palette TEST]\n");
Glib_ClearScr(0, MODE_TFT_8BIT_640480);
rTPAL = (1<<24)|((0xff)<<0); // Enable Temporary Palette : Blue
Lcd_PowerEnable(0, 1);
Lcd_EnvidOnOff(1);
Uart_Printf("Temporary palette test. Press any key!\n");
Uart_Getch();
k=0;
for(i=0;i<640;i+=40)
for(j=0;j<480;j+=30)
{
Glib_FilledRectangle(i,j,i+39,j+29,(k%256));
k++;
}
rTPAL = 0;
Uart_Printf("Press any key to test writing palette during non-active.\n");
palette=(U32 *)PALETTE;
for(cdata=0;cdata<255;cdata++)
{
p_red=(cdata | 0xe0);
p_green=(cdata | 0x1c);
p_blue=(cdata | 0x03);
while((rLCDCON5>>19)==2);
*palette++=((U32)((p_red<<8)|(p_green<<6)|(p_blue<<3)));
Uart_Printf("VSTATUS=%x\n",(rLCDCON5>>19));
Uart_Printf("cdata=%d\n",(int)cdata);
}
*palette=0x0;
Uart_Getch();
Lcd_EnvidOnOff(0);
Lcd_Port_Return();
}
void Test_Lcd_Tft_8Bit_640480_Bswp(void)
{
int k;
Lcd_Palette8Bit_Init();
Lcd_Port_Init();
Lcd_Init(MODE_TFT_8BIT_640480);
Glib_Init(MODE_TFT_8BIT_640480);
Lcd_EnvidOnOff(1);
Lcd_PowerEnable(0, 1);
rLCDCON5 &= 0x1ffffd; //BSWP Disable
Uart_Printf("[TFT 256 COLOR(16bit/1pixel) BSWP TEST]\n");
Glib_ClearScr(0, MODE_TFT_8BIT_640480);
Glib_Rectangle(0,0,639,479,0xff);
Glib_Rectangle(1,1,638,478,0x03);
Glib_Rectangle(0+100,0+100,639-100,479-100,0xff);
Glib_Rectangle(1+100,1+100,638-100,478-100,0x03);
Glib_Line(0,0,639,479,0xe0);
Glib_Line(639,0,0,479,0x1c);
Uart_Printf("TFT 256 color BSWP test. Press any key excet return!\n");
while(Uart_Getch()!='\r')
{
rLCDCON5 &= 0x1ffffd; //BSWP Disable
rLCDCON5 |= ((k%2)<<1); //BSWP Enable
k++;
}
Lcd_EnvidOnOff(0);
Lcd_Port_Return();
}
void Test_Lcd_Tft_16Bit_640480(void)
{
int i,j,k;
Lcd_Port_Init();
Lcd_Init(MODE_TFT_16BIT_640480);
Glib_Init(MODE_TFT_16BIT_640480);
Lcd_PowerEnable(0, 1);
Lcd_EnvidOnOff(1);
Uart_Printf("[TFT 64K COLOR(16bit/1pixel) LCD TEST]\n");
Glib_ClearScr(0, MODE_TFT_16BIT_640480);
Glib_FilledRectangle(0,0,639,479,0xf800);
Uart_Printf("TFT 64K color mode test 1. Press any key!\n");
Uart_Getch();
Glib_ClearScr(0, MODE_TFT_16BIT_640480);
Glib_Rectangle(0,0,639,479,0x07e0);
Glib_FilledRectangle(0,0,20,20,65535);
Glib_Rectangle(620,460,639,479,65535);
Glib_Line(0,0,639,479,0x1f);
Glib_Line(639,0,0,479,0xf800);
Uart_Printf("TFT 64K color mode test 2. Press any key!\n");
Uart_Getch();
Glib_ClearScr(0, MODE_TFT_16BIT_640480);
k=0;
for(i=160;i<480;i+=20)
for(j=120;j<360;j+=15)
{
while((rLCDCON5>>19)==2);
Glib_FilledRectangle(i,j,i+19,j+14,k);
k+=500;
}
// #0
// 00
Glib_Rectangle(0,0,319,239,65535);
Glib_Line(0,0,319,239,65535);
Glib_Line(0,239,319,0,65535);
// 0#
// 00
Glib_Rectangle(0+320,0,319+320,239,255);
Glib_Line(0+320,0,319+320,239,255);
Glib_Line(0+320,239,319+320,0,255);
// 00
// #0
Glib_Rectangle(0,0+240,319,239+240,255);
Glib_Line(0,0+240,319,239+240,255);
Glib_Line(0,239+240,319,0+240,255);
// 00
// 0#
Glib_Rectangle(0+320,0+240,319+320,239+240,255);
Glib_Line(0+320,0+240,319+320,239+240,255);
Glib_Line(0+320,239+240,319+320,0+240,255);
Glib_Rectangle(50+320,50+240,269+320,189+240,255);
Uart_Printf("TFT 64K color mode test 3. Press any key!\n");
Uart_Getch();
Glib_ClearScr(0, MODE_TFT_16BIT_640480);
k=0;
for(i=320;i<960;i+=40)
for(j=240;j<720;j+=30)
{
Glib_FilledRectangle(i,j,i+39,j+29,k);
k+=500;
}
// #0
// 00
Glib_Rectangle(0,0,639,479,65535);
Glib_Line(0,0,639,479,65535);
Glib_Line(0,479,639,0,65535);
// 0#
// 00
Glib_Rectangle(0+640,0,639+640,479,65535);
Glib_Line(0+640,0,639+640,479,65535);
Glib_Line(0+640,479,639+640,0,65535);
// 00
// #0
Glib_Rectangle(0,0+480,639,479+480,65535);
Glib_Line(0,0+480,639,479+480,65535);
Glib_Line(0,479+480,639,0+480,65535);
// 00
// 0#
Glib_Rectangle(0+640,0+480,639+640,479+480,65535);
Glib_Line(0+640,0+480,639+640,479+480,65535);
Glib_Line(0+640,479+480,639+640,0+480,65535);
Glib_Rectangle(50+640,50+480,639+640-50,479+480-50,65535);
Uart_Printf("Virtual Screen Test(TFT 64K color). Press any key[ijkm\\r]!\n");
MoveViewPort(MODE_TFT_16BIT_640480);
Lcd_MoveViewPort(0,0,MODE_TFT_16BIT_640480);
Lcd_EnvidOnOff(0);
Lcd_Port_Return();
}
void Test_Lcd_Tft_16Bit_640480_Hwswp(void)
{
int k;
Lcd_Port_Init();
Lcd_Init(MODE_TFT_16BIT_640480);
Glib_Init(MODE_TFT_16BIT_640480);
Lcd_PowerEnable(0, 1);
Lcd_EnvidOnOff(1);
rLCDCON5 &= 0x1ffffe; //HWSWP Disable
Uart_Printf("[TFT 64K COLOR(16bit/1pixel) HWSWP TEST]\n");
Glib_ClearScr(0, MODE_TFT_16BIT_640480);
Glib_Rectangle(0,0,639,479,0xffff);
Glib_Rectangle(1,1,638,478,0xf800);
Glib_Rectangle(0+100,0+100,639-100,479-100,0xffff);
Glib_Rectangle(1+100,1+100,638-100,478-100,0xf800);
Glib_Line(0,0,639,479,0x7e0);
Glib_Line(639,0,0,479,0x1f);
Uart_Printf("TFT 64K color HWSWP test. Press any key excet return!\n");
while(Uart_Getch()!='\r')
{
rLCDCON5 &= 0x1ffffe; //HWSWP Disable
rLCDCON5 |= (k%2); //HWSWP Enable
k++;
}
Lcd_EnvidOnOff(0);
Lcd_Port_Return();
}
void Test_Lcd_Tft_1Bit_800600(void)
{
int i,j;
Lcd_Port_Init();
Lcd_Palette1Bit_Init();
Lcd_Init(MODE_TFT_1BIT_800600);
Glib_Init(MODE_TFT_1BIT_800600);
Uart_Printf("[TFT Mono(1bit/1pixel) LCD TEST]\n");
rTPAL = (1<<24)|((0xff)<<0); // Enable Temporary Palette : Blue
//--------LCD FIFO interrupt test---------------------------------------------------START
Lcd_EnvidOnOff(1); // Enable ENVID
//The content of GPG4 is changed to OUTPUT('01').
//We will check the frame interrupt with using Logic Analyzer.
rGPGUP=rGPGUP&(~(1<<4))|(1<<4); // Pull-up disable
rGPGDAT=rGPGDAT&(~(1<<4))|(1<<4); // GPG4=High
rGPGCON=rGPGCON&(~(3<<8))|(1<<8); // GPG4=Output
pISR_LCD=(unsigned)Lcd_Int_Fifo_640480;
rINTMSK=~(BIT_LCD);
rLCDINTMSK=(0<<2)|(1<<1)|(0); // 4Words Trigger Level,Mask Frame int,Unmask Fifo int
// rLCDINTMSK=(1<<2)|(1<<1)|(0); // 8Words Trigger Level,Mask Frame int,Unmask Fifo int
// Lcd_EnvidOnOff(1); // Enable ENVID
//--------LCD FIFO interrupt test-----------------------------------------------------END
Uart_Printf("TFT Mono mode test 1. Press any key!\n");
Uart_Getch();
rTPAL = 0; // Disable TPAL
Glib_FilledRectangle(0,0,LCD_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600-1,1);
Uart_Printf("TFT Mono mode test 2. Press any key!\n");
Uart_Getch();
Glib_FilledRectangle(200,200,LCD_XSIZE_TFT_800600-201,LCD_YSIZE_TFT_800600-201,0);
Uart_Printf("TFT Mono mode test 3. Press any key!\n");
Uart_Getch();
Glib_ClearScr(0, MODE_TFT_1BIT_800600);
Glib_Rectangle(200,200,SCR_XSIZE_TFT_800600-201,SCR_YSIZE_TFT_800600-201,1);
// #0
// 00
Glib_Rectangle(0,0,LCD_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600-1,1);
Glib_Line(0,0,LCD_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600-1,1);
Glib_Line(0,LCD_YSIZE_TFT_800600-1,LCD_XSIZE_TFT_800600-1,0,1);
// 0#
// 00
Glib_Rectangle(LCD_XSIZE_TFT_800600,0,SCR_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600-1,1);
Glib_Rectangle(LCD_XSIZE_TFT_800600+100,100,SCR_XSIZE_TFT_800600-101,LCD_YSIZE_TFT_800600-101,1);
// 00
// #0
Glib_Rectangle(0,LCD_YSIZE_TFT_800600,LCD_XSIZE_TFT_800600-1,SCR_YSIZE_TFT_800600-1,1);
Glib_Rectangle(200,LCD_YSIZE_TFT_800600+200,LCD_XSIZE_TFT_800600-201,SCR_YSIZE_TFT_800600-201,1);
// 00
// 0#
Glib_Rectangle(LCD_XSIZE_TFT_800600,LCD_YSIZE_TFT_800600,SCR_XSIZE_TFT_800600-1,SCR_YSIZE_TFT_800600-1,1);
Glib_Line(LCD_XSIZE_TFT_800600,LCD_YSIZE_TFT_800600,SCR_XSIZE_TFT_800600-1,SCR_YSIZE_TFT_800600-1,1);
Glib_Line(LCD_XSIZE_TFT_800600,SCR_YSIZE_TFT_800600-1,SCR_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600,1);
Uart_Printf("Virtual Screen Test(Mono). Press any key[ijkm\\r]!\n");
MoveViewPort(MODE_TFT_1BIT_800600);
Lcd_MoveViewPort(0,0,MODE_TFT_1BIT_800600);
//--------LCD FIFO interrupt test---------------------------------------------------START
rLCDINTMSK|=3; // Mask LCD SUB Interrupt
rINTMSK|=(BIT_LCD); // Mask LCD INT
//--------LCD FIFO interrupt test-----------------------------------------------------END
Lcd_EnvidOnOff(0);
Lcd_Port_Return();
}
void Test_Lcd_Tft_8Bit_800600(void)
{
int i,j,k;
Lcd_Port_Init();
Lcd_Palette8Bit_Init();
Lcd_Init(MODE_TFT_8BIT_800600);
Glib_Init(MODE_TFT_8BIT_800600);
Uart_Printf("[TFT 256 COLOR(8bit/1pixel) LCD TEST]\n");
rTPAL = (1<<24)|((0xff)<<0); // Enable Temporary Palette : Blue
//--------LCD FIFO interrupt test---------------------------------------------------START
Lcd_EnvidOnOff(1); // Enable ENVID
//The content of GPG4 is changed to OUTPUT('01').
//We will check the frame interrupt with using Logic Analyzer.
rGPGUP=rGPGUP&(~(1<<4))|(1<<4); // Pull-up disable
rGPGDAT=rGPGDAT&(~(1<<4))|(1<<4); // GPG4=High
rGPGCON=rGPGCON&(~(3<<8))|(1<<8); // GPG4=Output
pISR_LCD=(unsigned)Lcd_Int_Fifo_640480;
rINTMSK=~(BIT_LCD);
rLCDINTMSK=(0<<2)|(1<<1)|(0); // 4Words Trigger Level,Mask Frame int,Unmask Fifo int
// rLCDINTMSK=(1<<2)|(1<<1)|(0); // 8Words Trigger Level,Mask Frame int,Unmask Fifo int
// Lcd_EnvidOnOff(1); // Enable ENVID
//--------LCD FIFO interrupt test-----------------------------------------------------END
Uart_Printf("TFT 256 color mode test 1. Press any key!\n");
Uart_Getch();
Glib_ClearScr(0, MODE_TFT_8BIT_800600);
rTPAL = 0;
k=0;
for(i=0;i<LCD_XSIZE_TFT_800600;i+=40)
for(j=0;j<LCD_YSIZE_TFT_800600;j+=30)
{
Glib_FilledRectangle(i,j,i+39,j+29,(k%256));
k++;
}
Uart_Printf("TFT 256 color mode test 2. Press any key!\n");
Uart_Getch();
Glib_ClearScr(0xff, MODE_TFT_8BIT_800600);
Uart_Printf("TFT 256 color mode test 3. Press any key!\n");
Uart_Getch();
Glib_ClearScr(0, MODE_TFT_8BIT_800600);
k=0;
for(i=(SCR_XSIZE_TFT_800600/4);i<(SCR_XSIZE_TFT_800600*(3/4));i+=40)
for(j=SCR_YSIZE_TFT_800600/4;j<(SCR_YSIZE_TFT_800600*(3/4));j+=30)
{
Glib_FilledRectangle(i,j,i+39,j+29,(k%256));
k++;
}
// #0
// 00
Glib_Rectangle(0,0,LCD_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600-1,0xff);
Glib_Line(0,0,LCD_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600-1,0xff);
Glib_Line(0,LCD_YSIZE_TFT_800600-1,LCD_XSIZE_TFT_800600-1,0,0xff);
// 0#
// 00
Glib_Rectangle(LCD_XSIZE_TFT_800600,0,SCR_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600-1,0xf0);
Glib_Rectangle(LCD_XSIZE_TFT_800600+100,100,SCR_XSIZE_TFT_800600-101,LCD_YSIZE_TFT_800600-101,0xf0);
// 00
// #0
Glib_Rectangle(0,LCD_YSIZE_TFT_800600,LCD_XSIZE_TFT_800600-1,SCR_YSIZE_TFT_800600-1,0x0f);
Glib_Rectangle(200,LCD_YSIZE_TFT_800600+200,LCD_XSIZE_TFT_800600-201,SCR_YSIZE_TFT_800600-201,0x0f);
// 00
// 0#
Glib_Rectangle(LCD_XSIZE_TFT_800600,LCD_YSIZE_TFT_800600,SCR_XSIZE_TFT_800600-1,SCR_YSIZE_TFT_800600-1,0xff);
Glib_Line(LCD_XSIZE_TFT_800600,LCD_YSIZE_TFT_800600,SCR_XSIZE_TFT_800600-1,SCR_YSIZE_TFT_800600-1,0xff);
Glib_Line(LCD_XSIZE_TFT_800600,SCR_YSIZE_TFT_800600-1,SCR_XSIZE_TFT_800600-1,LCD_YSIZE_TFT_800600,0xff);
Uart_Printf("Virtual Screen Test(TFT 256 color). Press any key[ijkm\\r]!\n");
MoveViewPort(MODE_TFT_8BIT_800600);
Lcd_MoveViewPort(0,0,MODE_TFT_8BIT_800600);
//--------LCD FIFO interrupt test---------------------------------------------------START
rLCDINTMSK|=3; // Mask LCD SUB Interrupt
rINTMSK|=(BIT_LCD); // Mask LCD INT
//--------LCD FIFO interrupt test-----------------------------------------------------END
Lcd_EnvidOnOff(0);
Lcd_Port_Return();
}
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -