?? protect.c
字號:
/*++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
protect.c
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
Forrest Yu, 2005
++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++*/
#include "type.h"
#include "const.h"
#include "protect.h"
#include "proto.h"
#include "proc.h"
#include "global.h"
/* 本文件內函數聲明 */
PRIVATE void init_idt_desc(unsigned char vector, t_8 desc_type, t_pf_int_handler handler, unsigned char privilege);
PRIVATE void init_descriptor(DESCRIPTOR * p_desc, t_32 base, t_32 limit, t_16 attribute);
/* 中斷處理函數 */
void divide_error();
void single_step_exception();
void nmi();
void breakpoint_exception();
void overflow();
void bounds_check();
void inval_opcode();
void copr_not_available();
void double_fault();
void copr_seg_overrun();
void inval_tss();
void segment_not_present();
void stack_exception();
void general_protection();
void page_fault();
void copr_error();
void hwint00();
void hwint01();
void hwint02();
void hwint03();
void hwint04();
void hwint05();
void hwint06();
void hwint07();
void hwint08();
void hwint09();
void hwint10();
void hwint11();
void hwint12();
void hwint13();
void hwint14();
void hwint15();
/*======================================================================*
init_prot
*----------------------------------------------------------------------*
初始化 IDT
*======================================================================*/
PUBLIC void init_prot()
{
init_8259A();
// 全部初始化成中斷門(沒有陷阱門)
init_idt_desc(INT_VECTOR_DIVIDE, DA_386IGate, divide_error, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_DEBUG, DA_386IGate, single_step_exception, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_NMI, DA_386IGate, nmi, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_BREAKPOINT, DA_386IGate, breakpoint_exception, PRIVILEGE_USER);
init_idt_desc(INT_VECTOR_OVERFLOW, DA_386IGate, overflow, PRIVILEGE_USER);
init_idt_desc(INT_VECTOR_BOUNDS, DA_386IGate, bounds_check, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_INVAL_OP, DA_386IGate, inval_opcode, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_COPROC_NOT, DA_386IGate, copr_not_available, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_DOUBLE_FAULT, DA_386IGate, double_fault, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_COPROC_SEG, DA_386IGate, copr_seg_overrun, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_INVAL_TSS, DA_386IGate, inval_tss, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_SEG_NOT, DA_386IGate, segment_not_present, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_STACK_FAULT, DA_386IGate, stack_exception, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_PROTECTION, DA_386IGate, general_protection, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_PAGE_FAULT, DA_386IGate, page_fault, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_COPROC_ERR, DA_386IGate, copr_error, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ0 + 0, DA_386IGate, hwint00, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ0 + 1, DA_386IGate, hwint01, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ0 + 2, DA_386IGate, hwint02, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ0 + 3, DA_386IGate, hwint03, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ0 + 4, DA_386IGate, hwint04, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ0 + 5, DA_386IGate, hwint05, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ0 + 6, DA_386IGate, hwint06, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ0 + 7, DA_386IGate, hwint07, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ8 + 0, DA_386IGate, hwint08, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ8 + 1, DA_386IGate, hwint09, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ8 + 2, DA_386IGate, hwint10, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ8 + 3, DA_386IGate, hwint11, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ8 + 4, DA_386IGate, hwint12, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ8 + 5, DA_386IGate, hwint13, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ8 + 6, DA_386IGate, hwint14, PRIVILEGE_KRNL);
init_idt_desc(INT_VECTOR_IRQ8 + 7, DA_386IGate, hwint15, PRIVILEGE_KRNL);
/* 填充 GDT 中 TSS 這個描述符 */
memset(&tss, 0, sizeof(tss));
tss.ss0 = SELECTOR_KERNEL_DS;
init_descriptor(&gdt[INDEX_TSS],
vir2phys(seg2phys(SELECTOR_KERNEL_DS), &tss),
sizeof(tss),/*0x69,*/
DA_386TSS);
// 填充 GDT 中進程的 LDT 的描述符
init_descriptor(&gdt[INDEX_LDT_FIRST],
vir2phys(seg2phys(SELECTOR_KERNEL_DS), proc_table[0].ldts),
LDT_SIZE * sizeof(DESCRIPTOR),
DA_LDT);
}
/*======================================================================*
init_idt_desc
*----------------------------------------------------------------------*
初始化 386 中斷門
*======================================================================*/
PUBLIC void init_idt_desc(unsigned char vector, t_8 desc_type, t_pf_int_handler handler, unsigned char privilege)
{
GATE * p_gate = &idt[vector];
t_32 base = (t_32)handler;
p_gate->offset_low = base & 0xFFFF;
p_gate->selector = SELECTOR_KERNEL_CS;
p_gate->dcount = 0;
p_gate->attr = desc_type | (privilege << 5);
p_gate->offset_high = (base >> 16) & 0xFFFF;
}
/*======================================================================*
seg2phys
*----------------------------------------------------------------------*
由段名求絕對地址
*======================================================================*/
PUBLIC t_32 seg2phys(t_16 seg)
{
DESCRIPTOR* p_dest = &gdt[seg >> 3];
return (p_dest->base_high << 24) | (p_dest->base_mid << 16) | (p_dest->base_low);
}
/*======================================================================*
init_descriptor
*----------------------------------------------------------------------*
初始化段描述符
*======================================================================*/
PRIVATE void init_descriptor(DESCRIPTOR * p_desc, t_32 base, t_32 limit, t_16 attribute)
{
p_desc->limit_low = limit & 0x0FFFF; // 段界限 1 (2 字節)
p_desc->base_low = base & 0x0FFFF; // 段基址 1 (2 字節)
p_desc->base_mid = (base >> 16) & 0x0FF; // 段基址 2 (1 字節)
p_desc->attr1 = attribute & 0xFF; // 屬性 1
p_desc->limit_high_attr2 = ((limit >> 16) & 0x0F) |
(attribute >> 8) & 0xF0;// 段界限 2 + 屬性 2
p_desc->base_high = (base >> 24) & 0x0FF; // 段基址 3 (1 字節)
}
/*======================================================================*
exception_handler
*----------------------------------------------------------------------*
異常處理
*======================================================================*/
PUBLIC void exception_handler(int vec_no, int err_code, int eip, int cs, int eflags)
{
int i;
int text_color = 0x74; /* 灰底紅字 */
char err_description[][64] = { "#DE Divide Error",
"#DB RESERVED",
"— NMI Interrupt",
"#BP Breakpoint",
"#OF Overflow",
"#BR BOUND Range Exceeded",
"#UD Invalid Opcode (Undefined Opcode)",
"#NM Device Not Available (No Math Coprocessor)",
"#DF Double Fault",
" Coprocessor Segment Overrun (reserved)",
"#TS Invalid TSS",
"#NP Segment Not Present",
"#SS Stack-Segment Fault",
"#GP General Protection",
"#PF Page Fault",
"— (Intel reserved. Do not use.)",
"#MF x87 FPU Floating-Point Error (Math Fault)",
"#AC Alignment Check",
"#MC Machine Check",
"#XF SIMD Floating-Point Exception"
};
/* 通過打印空格的方式清空屏幕的前五行，并把 disp_pos 清零 */
disp_pos = 0;
for(i=0;i<80*5;i++){
disp_str(" ");
}
disp_pos = 0;
disp_color_str("Exception! --> ", text_color);
disp_color_str(err_description[vec_no], text_color);
disp_color_str("\n\n", text_color);
disp_color_str("EFLAGS:", text_color);
disp_int(eflags);
disp_color_str("CS:", text_color);
disp_int(cs);
disp_color_str("EIP:", text_color);
disp_int(eip);
if(err_code != 0xFFFFFFFF){
disp_color_str("Error code:", text_color);
disp_int(err_code);
}
}
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -