;*******************************************************************************
;   MSP430F20x2 Demo - ADC10, DTC Sample A3-01, AVcc, Single Sequence, DCO
;
;   Description: Sample A3/A2/A1 as single sequence with reference to AVcc.
;   Software sets ADC10SC to trigger sample sequence. In Mainloop MSP430 waits
;   in LPM0 to save power until ADC10 conversion complete, ADC10_ISR(DTC) will
;   force exit from any LPMx in Mainloop on reti. ADC10_ISR will force any LPMx
;   exit. ADC10 internal oscillator times sample period (16x) and conversion
;   (13x). DTC transfers conversion code to RAM 200h - 206h. P1.0 set at start
;   of conversion burst, reset on completion.
;
;                MSP430F20x2
;             -----------------
;         /|\|              XIN|-
;          | |                 |
;          --|RST          XOUT|-
;            |                 |
;        >---|P1.3/A3      P1.0|-->LED
;        >---|P1.2/A2          |
;        >---|P1.1/A1          |
;
;   L. Westlund
;   Texas Instruments Inc.
;   May 2006
;   Built with IAR Embedded Workbench Version: 3.41A
;*******************************************************************************
#include "msp430x20x2.h"
;-------------------------------------------------------------------------------
            RSEG    CSTACK                  ; Define stack segment
;-------------------------------------------------------------------------------
            RSEG    CODE                    ; Assemble to Flash memory
;-------------------------------------------------------------------------------
RESET       mov.w   #SFE(CSTACK),SP         ; Initialize stackpointer
StopWDT     mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop WDT
SetupADC10  mov.w   #INCH_3+CONSEQ_1,&ADC10CTL1 ; A3/A2/A1, single sequence
            mov.w   #ADC10SHT_2+MSC+ADC10ON+ADC10IE,&ADC10CTL0 ;
            bis.b   #0Eh,&ADC10AE0          ; P1.1,2,3 ADC10 option selects
            mov.b   #03h,&ADC10DTC1         ; 3 conversions
SetupP1     bis.b   #001h,&P1DIR            ; P1.0 output
                                            ;
Mainloop    bic.w   #ENC,&ADC10CTL0         ;
busy_test   bit     #BUSY,&ADC10CTL1        ; ADC10 core inactive?
            jnz     busy_test               ;
            mov.w   #0200h,&ADC10SA         ; Data buffer start
            bis.b   #001h,&P1OUT            ; P1.0 = 0
            bis.w   #ENC+ADC10SC,&ADC10CTL0 ; Start sampling
            bis.w   #CPUOFF+GIE,SR          ; LPM0, ADC10_ISR will force exit
            bic.b   #001h,&P1OUT            ; P1.0 = 1
            jmp     Mainloop                ; Again
                                            ;
;-------------------------------------------------------------------------------
ADC10_ISR;  Exit LPM0 on reti
;-------------------------------------------------------------------------------
            bic.w   #CPUOFF,0(SP)           ; Exit LPM0 on reti
            reti                            ;
                                            ;
;-------------------------------------------------------------------------------
            COMMON  INTVEC                  ; Interrupt Vectors
;-------------------------------------------------------------------------------
            ORG     ADC10_VECTOR            ; ADC10 Vector
            DW      ADC10_ISR
            ORG     RESET_VECTOR            ; POR, ext. Reset
            DW      RESET
            END