;******************************************************************************
;   MSP430F20x2/3 Demo - SPI full-Duplex 3-wire Slave
;
;   Description: SPI Master communicates full-duplex with SPI Slave using
;   3-wire mode. The level on P1.4 is TX'ed and RX'ed to P1.0.
;   Master will pulse slave reset for synch start.
;   ACLK = n/a, MCLK = SMCLK = Default DCO
;
;                 Slave                      Master
;                MSP430F20x2/3              MSP430F20x2/3
;              -----------------          -----------------
;             |              XIN|-    /|\|              XIN|-
;             |                 |      | |                 |
;             |             XOUT|-     --|RST          XOUT|-
;             |                 | /|\    |                 |
;             |          RST/NMI|--+<----|P1.2             |
;       LED <-|P1.0             |        |             P1.4|<-
;           ->|P1.4             |        |             P1.0|-> LED
;             |         SDI/P1.7|<-------|P1.6/SDO         |
;             |         SDO/P1.6|------->|P1.7/SDI         |
;             |        SCLK/P1.5|<-------|P1.5/SCLK        |
;
;  M. Buccini
;  Texas Instruments, Inc
;  October 2005
;******************************************************************************
#include "msp430x20x3.h"
;-----------------------------------------------------------------------------
            ORG     0F800h                  ; Program Reset
;-----------------------------------------------------------------------------
RESET       mov.w   #0280h,SP               ; Initialize stackpointer
StopWDT     mov.w   #WDTPW+WDTHOLD,&WDTCTL  ; Stop watchdog timer
SetupP1     mov.b   #010h,&P1OUT            ; P1.4 set, else
            bis.b   #010h,&P1REN            ; P1.4 pullup
            bis.b   #001h,&P1DIR            ;
SetupUSI    bis.b   #USIPE7+USIPE6+USIPE5+USIOE,&USICTL0; Port, SPI slave
            bis.b   #USIIE,&USICTL1         ; Counter interrupt, flag remains
            bic.b   #USISWRST,&USICTL0      ; Enable USI
            mov.b   &P1IN,&USISRL           ; init-load TX data
            mov.b   #08h,&USICNT            ; init-load counter, clear flag
                                            ;
Mainloop    bis.b   #LPM4+GIE,SR            ; LPM4 w/ interrupts enabled
            nop                             ; Required for debugger only
                                            ;
;------------------------------------------------------------------------------
USI_ISR;
;------------------------------------------------------------------------------
            mov.b   &USISRL,R4              ; Temp save RX'ed char
            mov.b   &P1IN,&USISRL           ;
            mov.b   #08h,&USICNT            ; re-load counter, clear flag
            bic.b   #01h,&P1OUT             ;
            bit.b   #010h,R4                ;
            jnc     L2                      ;
L1          bis.b   #01h,&P1OUT             ;
L2          reti                            ; Exit ISR
                                            ;
;------------------------------------------------------------------------------
;           Interrupt Vectors Used MSP430x20x2/3
;------------------------------------------------------------------------------
            ORG     0FFFEh                  ; MSP430 RESET Vector
            DW      RESET                   ;
            ORG     0FFE8h                  ; USICNT
            DW      USI_ISR                 ;
            END