;;--------------------------------------------------------------------
;;PUSH & POP
M_ACCBAK			DB	?
M_STABAK			DB	?
M_MP0BAK			DB 	?
M_MP1BAK			DB	?
M_TBLPBAK			DB	?
;;--------------------------------------------------------------------
M_TBLPFIFO			DB	?		;;save TBLP.
                        	
M_Temp1				DB	?
M_Temp2				DB	?                 
M_STALL				DB	?
M_ReportIndex			DB	? 		;;report index                  
M_DescriptorLength		DB	? 		;;save the length of descriptir                 
M_DataPacketLength		DB	?  		;;save the length of Data Packet                
M_FIFOBAK0			DB	?		;;save FIFO data
M_FIFOBAK1			DB	?
M_FIFOBAK2			DB	?
M_FIFOBAK3			DB	?
M_FIFOBAK4			DB	?
M_FIFOBAK5			DB	?
M_FIFOBAK6			DB	?
M_FIFOBAK7			DB	?
M_FIFOAddress			DB	?		;;save FIFO's address
M_IdleTime			DB	?
M_DeviceAddress			DB	?
M_EndpointNO			DB	?                
M_DataLengthL			DB	?
M_DataLengthH			DB	? 

;;----------------------------------------------------
;M_TMR_MS			DB	?
;M_AD_COUNT			DB	?

M_AD_BUF0			DB	?
M_AD_BUF1			DB	?
M_AD_BUF2			DB	?
M_AD_BUF3			DB	?
M_AD_BUF4			DB	?
M_AD_BUF5			DB	?
M_AD_BUF6			DB	?
M_AD_BUF7			DB	?
;;---------------------------------------------------

M_Flag0				DB	?
F_AddressStatus			EQU	M_Flag0.0	;;Address status flag         
F_ConfigurationStatus		EQU	M_FLAG0.1          
F_ControlEvent			EQU	M_FLAG0.2	;;Setup was already?(0:no setup 1:setup)          
F_SetupData			EQU	M_FLAG0.3	;;Setup Data flag          
F_SendData			EQU	M_FLAG0.4	;;send Data flag          
F_RemoteWakeup			EQU	M_FLAG0.5  	;;suport remote wakeup(1)        
F_RdHighTable			EQU 	M_FLAG0.6	;;If F_RdHighTable is 1 then indicated read high byte of table. If F_RdHighTable is 0 then indicated read low byte of table.
F_BufferFull			EQU	M_FLAG0.7	;;if the buffer is full,then this flag set 1
M_FLAG1				DB	?
F_SendContinue			EQU	M_FLAG1.0	;;flag of send data not load finally.
F_DataUpdate			EQU	M_FLAG1.1	;;flag of data which in FIFO was updata.(????)
F_ReportProtocol		EQU	M_FLAG1.2          
;;F_TimerInterruptEnable       	EQU     M_FLAG1.3
;;F_Polling                    	EQU     M_FLAG1.4
F_AD_FULL			EQU	M_FLAG1.5	;;flag of AD receive end for 8 byte       

;;---------------------------------------------------