{       
        if(rUTRSTAT2 & 0x1)    //Receive data ready
            return RdURXH2();
        else
            return 0;
    }    
}

//====================================================================
void Uart_GetString(char *string)
{
    char *string2 = string;
    char c;
    while((c = Uart_Getch())!='\r')
    {
        if(c=='\b')
        {
            if( (int)string2 < (int)string )
            {
                Uart_Printf("\b \b");
                string--;
            }
        }
        else 
        {
            *string++ = c;
            Uart_SendByte(c);
        }
    }
    *string='\0';
    Uart_SendByte('\n');
}

//=====================================================================
int Uart_GetIntNum(void)
{
    char str[30];
    char *string = str;
    int base     = 10;
    int minus    = 0;
    int result   = 0;
    int lastIndex;    
    int i;
    
    Uart_GetString(string);
    
    if(string[0]=='-')
    {
        minus = 1;
        string++;
    }
    
    if(string[0]=='0' && (string[1]=='x' || string[1]=='X'))
    {
        base    = 16;
        string += 2;
    }
    
    lastIndex = strlen(string) - 1;
    
    if(lastIndex<0)
        return -1;
    
    if(string[lastIndex]=='h' || string[lastIndex]=='H' )
    {
        base = 16;
        string[lastIndex] = 0;
        lastIndex--;
    }

    if(base==10)
    {
        result = atoi(string);
        result = minus ? (-1*result):result;
    }
    else
    {
        for(i=0;i<=lastIndex;i++)
        {
            if(isalpha(string[i]))
            {
                if(isupper(string[i]))
                    result = (result<<4) + string[i] - 'A' + 10;
                else
                    result = (result<<4) + string[i] - 'a' + 10;
            }
            else
                result = (result<<4) + string[i] - '0';
        }
        result = minus ? (-1*result):result;
    }
    return result;
}

//=====================================================================
void Uart_SendByte(int data)
{
    if(whichUart==0)
    {
        if(data=='\n')
        {
            while(!(rUTRSTAT0 & 0x2));
            Delay(10);                 //because the slow response of hyper_terminal 
            WrUTXH0('\r');
        }
        while(!(rUTRSTAT0 & 0x2));   //Wait until THR is empty.
        Delay(10);
        WrUTXH0(data);
    }
    else if(whichUart==1)
    {
        if(data=='\n')
        {
            while(!(rUTRSTAT1 & 0x2));
            Delay(10);                 //because the slow response of hyper_terminal 
            rUTXH1 = '\r';
        }
        while(!(rUTRSTAT1 & 0x2));   //Wait until THR is empty.
        Delay(10);
        rUTXH1 = data;
    }   
    else if(whichUart==2)
    {
        if(data=='\n')
        {
            while(!(rUTRSTAT2 & 0x2));
            Delay(10);                 //because the slow response of hyper_terminal 
            rUTXH2 = '\r';
        }
        while(!(rUTRSTAT2 & 0x2));   //Wait until THR is empty.
        Delay(10);
        rUTXH2 = data;
    }       
}               

//====================================================================
void Uart_SendString(char *pt)
{
    while(*pt)
        Uart_SendByte(*pt++);
}

//=====================================================================
//If you don't use vsprintf(), the code size is reduced very much.
void Uart_Printf(char *fmt,...)
{
    va_list ap;
    char string[256];

    va_start(ap,fmt);
    vsprintf(string,fmt,ap);
    Uart_SendString(string);
    va_end(ap);
}


//========================**[ BOARD LED ]=================================
void Led_Display(int data)
{
          //Active is low.(LED On)
          // GPF7  GPF6   GPF5   GPF4
          //nLED_8 nLED4 nLED_2 nLED_1
//    rGPFDAT = (rGPFDAT & 0xf) | !((data & 0xf)<<4);
    rGPFDAT = (rGPFDAT & ~(0xf<<4)) | ((~data & 0xf)<<4);    
}


//========================*[ Timer ]==============================**
void Timer_Start(int divider)  //0:16us,1:32us 2:64us 3:128us
{
    rWTCON = ((PCLK/1000000-1)<<8)|(divider<<3);  //Watch-dog timer control register
    rWTDAT = 0xffff;  //Watch-dog timer data register
    rWTCNT = 0xffff;  //Watch-dog count register

      //Watch-dog timer enable & interrupt  disable
//    rWTCON = rWTCON |(1<<5) & !(1<<2);  //?
    rWTCON = rWTCON | (1<<5) | ~(1<<2);  //May 06, 2002 SOP
}

//=================================================================
int Timer_Stop(void)
{
    rWTCON = ((PCLK/1000000-1)<<8);
    return (0xffff - rWTCNT);
}


//========================*[ MPLL ]==============================*
void ChangeMPllValue(int mdiv,int pdiv,int sdiv)
{
    rMPLLCON = (mdiv<<12) | (pdiv<<4) | sdiv;
}


//========================[ HCLK, PCLK ]===========================
void ChangeClockDivider(int hdivn,int pdivn)
{
     // hdivn,pdivn FCLK:HCLK:PCLK
     //     0,0         1:1:1 
     //     0,1         1:1:2 
     //     1,0         1:2:2
     //     1,1         1:2:4
    rCLKDIVN = (hdivn<<1) | pdivn;    
    
    if(hdivn)
        MMU_SetAsyncBusMode();
    else 
        MMU_SetFastBusMode();
}


//========================**[ UPLL ]==============================*
void ChangeUPllValue(int mdiv,int pdiv,int sdiv)
{
    rUPLLCON = (mdiv<<12) | (pdiv<<4) | sdiv;
}


//========================*[ General Library ]=====================*
void * malloc(unsigned nbyte) 
//Very simple; Use malloc() & free() like Stack
//void *mallocPt=Image$$RW$$Limit;
{
    void *returnPt = mallocPt;

    mallocPt = (int *)mallocPt+nbyte/4+((nbyte%4)>0); //To align 4byte

    if( (int)mallocPt > HEAPEND )
    {
        mallocPt = returnPt;
        return NULL;
    }
    return returnPt;
}

//-------------------------------------------------------------------
void free(void *pt)
{
    mallocPt = pt;
}