/*-----------------------------------------------------*
*文件名:vectors08.c                                    *
*功  能:用于定義中斷矢量表                             *
*-----------------------------------------------------*/
//[頭文件]
#include "GP32C.H"          //包含頭文件
#include "DJC.H"
extern unsigned char flag;
//未定義的中斷處理函數(shù),本函數(shù)不能刪除
#pragma interrupt_handler isrDummy  
void isrDummy(void) 
  {
  }
  
#pragma interrupt_handler isrDummy  
void isTimer1(void){
   PTB=0xff;
   if(flag==0){
   		flag=1;WARM_P=0;
   		PTB=0xf0;
   }
   if(flag>=1){
   		flag=0;WARM_P=1;
   		PTB=0x0f;
   }
   T1SC&=~(1<<TOFBit);	//重新開始計數(shù)	
}
  
//中斷矢量表，需定義中斷函數(shù)，可修改下表中的相應項目
//(interrupt service routine，isr 中斷處理程序)
#pragma abs_address:0xffdc    //中斷向量表起始地址
void (* const _vectab[])(void) = {            
	isrDummy,		//時基中斷 
	isrDummy,		//AD轉換中斷      
	isrDummy, 	    //鍵盤中斷    
	isrDummy,		//SCI TC/TE 
	isrDummy,		//SCI RF/IDLE 
	isrDummy,		//SCI PE/FE/NF/OR
	isrDummy,		//SPI TE  
	isrDummy,		//SPI MOD/OVR/RF
	isrDummy,		//TIM2溢出中斷 
	isrDummy,		//TIM2通道1
	isrDummy,		//TIM2通道0
	isTimer1,		//TIM1溢出中斷      
	isrDummy,		//TIM1通道1
	isrDummy,		//TIM1通道0
	isrDummy,		//CGM     
	isrDummy,		//IRQ     
	isrDummy		//SWI       
    //RESET也是中斷，定義在 crt08.o中 
   };
#pragma end_abs_address