/*-----------------------------------------------------*
*文件名:vectors08.c                                    *
*功  能:用于定義中斷矢量表                             *
*-----------------------------------------------------*/
//[頭文件]
#include "GP32C.H" 
#include "KB.h"             //包含頭文件
#define TSTOPBit   5      //定時器計數停止位
#define TOFBit     7      //定時器溢出標志位
//未定義的中斷處理函數,本函數不能刪除  
extern unsigned char KB_Scan(void);
extern unsigned char KB_Def(unsigned char KB_valve);
extern void displaytime(void);
extern void bi(unsigned char p);
extern void shilf(void);
extern unsigned char time[3];
extern unsigned char date[3];
#pragma interrupt_handler isrDummy  
void isrDummy(void) 
  {

  }

#pragma interrupt_handler isrTIMER1
void isrTIMER1(void)
{
   unsigned char i;
   asm("SEI");            //關總中斷
   //------------------------------
   time[2]++;             //秒數加1
   if (time[2]>=60){       //秒數未增加到60,轉
      time[2]=0; time[1]++;  //秒數增加到60,清0,分鐘數加1
   }
   if (time[1]>=60){          //分鐘數未增到60,轉
      time[1]=0; time[0]++;  //分鐘數增加到60,清0,小時數加1
      bi(1);
   }
   if (time[0]>=24){          //小時數未增到24,轉
      time[0]=0;             //時數增加到24,清0
      date[2]++;
   }
   if(date[2]==31){
   	  date[1]++;
   	  date[2]=1;
   }
   if(date[2]==13){
   	  date[0]++;
   	  date[1]=1;
   }
   T1SC&=~(1<<TOFBit);
   displaytime(); 
   asm("CLI");            //開總中斷
}


/*鍵盤中斷處理函數------------------------------------*/
#pragma interrupt_handler isrKBI
void isrKBI(void)
{
	asm("SEI");
	  unsigned char KB_valve;
	  INTKBSCR|= (1<<IntBit); //屏蔽鍵盤中斷(IMASKK=1)
	  KB_valve=KB_Scan();     //掃描鍵值
      KB_valve=KB_Def(KB_valve);  //鍵值轉化為定義值
      switch(KB_valve){
      case '*':
      	T1SC|=1<<TOFBit;		//stop timer
      	break;
      case 'A':shilf();
      }
	  KB_Init();			     //重新初始化鍵盤
	  INTKBSCR&= ~(1<<IntBit); //打開鍵盤中斷(IMASKK=0)
	  asm("CLI");				     //重新初始化鍵盤
}

//中斷矢量表，需定義中斷函數，可修改下表中的相應項目
//(interrupt service routine，isr 中斷處理程序)
#pragma abs_address:0xffdc    //中斷向量表起始地址
void (* const _vectab[])(void) = {            
	isrDummy,		//時基中斷 
	isrDummy,		//AD轉換中斷      
	isrKBI,  	    //鍵盤中斷    
	isrDummy,		//SCI TC/TE 
	isrDummy,		//SCI RF/IDLE 
	isrDummy,		//SCI PE/FE/NF/OR
	isrDummy,		//SPI TE  
	isrDummy,		//SPI MOD/OVR/RF
	isrDummy,		//TIM2溢出中斷 
	isrDummy,		//TIM2通道1
	isrDummy,		//TIM2通道0
	isrTIMER1,		//TIM1溢出中斷      
	isrDummy,		//TIM1通道1
	isrDummy,		//TIM1通道0
	isrDummy,		//CGM     
	isrDummy,		//IRQ     
	isrDummy		//SWI       
    //RESET也是中斷，定義在 crt08.o中 
   };
#pragma end_abs_address