/* Set pointers in local structures to point to data. */
	netMblkToBufCopy(pNBuff, (void *)pTxFd->txFrameData.frameDataPtr, NULL) ;

	*(UINT32 *)(&pTxFd->txControl) = 0;	/* Reset control word */
	pTxFd->txControl.t_bit = 1;
	pTxFd->txControl.a_bit = 1;
	pTxFd->txControl.l_bit = 1;

	pTxFd->txStatusLength.frameLength = len;
	pTxFd->txFrameData.o_bit = 1;

    /* place a transmit request */

     oldLevel = intLock ();   /* now sndsEndInt won't get confused */

    /* initiate device transmit */
	bdmaTxCon.txCon_resetval = *(UINT32 *)SNDS_BDMATXCON;
	bdmaTxCon.txCon_reg.enable = 1;
	*(UINT32 *)SNDS_BDMATXCON = bdmaTxCon.txCon_resetval;

	macTxCon.macTxCon_resetval = *(UINT32 *)SNDS_MACTXCON;
	macTxCon.macTxCon_reg.transmitEnable = 1;
	*(UINT32 *)SNDS_MACTXCON = macTxCon.macTxCon_resetval;

    intUnlock (oldLevel);   /* now sndsEndInt won't get confused */
    
    /* Advance our management index */
	gpTransmitFrameDescStart = gpTransmitFrameDescStart->nextTxFrameDesc;

	END_TX_SEM_GIVE (&pDrvCtrl->end);
    
    /* Bump the statistic counter. */

    END_ERR_ADD (&pDrvCtrl->end, MIB2_OUT_UCAST, +1);

    /*
     * Cleanup.  The driver must either free the packet now or
     * set up a structure so it can be freed later after a transmit
     * interrupt occurs.
     */

    if (freeNow)
        netMblkClChainFree (pNBuff);

    return (OK);
    }

/*******************************************************************************
*
* sndsEndIoctl - the driver I/O control routine
*
* Process an ioctl request.
*
* RETURNS: A command specific response, usually OK or ERROR.
*/

LOCAL int sndsEndIoctl
    (
    END_DEVICE *pDrvCtrl,	/* device receiving command */
    int cmd,			/* ioctl command code */
    caddr_t data		/* command argument */
    )
    {
    int error = 0;
    long value;

    switch (cmd)
        {
        case EIOCSADDR:
	    if (data == NULL)
		return (EINVAL);
            bcopy ((char *)data, (char *)END_HADDR(&pDrvCtrl->end),
		   END_HADDR_LEN(&pDrvCtrl->end));
            break;

        case EIOCGADDR:
	    if (data == NULL)
		return (EINVAL);
            bcopy ((char *)END_HADDR(&pDrvCtrl->end), (char *)data,
		    END_HADDR_LEN(&pDrvCtrl->end));
            break;

        case EIOCSFLAGS:
	    value = (long)data;
	    if (value < 0)
		{
		value = ~value;
		END_FLAGS_CLR (&pDrvCtrl->end, value);
		}
	    else
		{
		END_FLAGS_SET (&pDrvCtrl->end, value);
		}
	    sndsEndConfig (pDrvCtrl);
            break;

        case EIOCGFLAGS:
	    *(int *)data = END_FLAGS_GET(&pDrvCtrl->end);
            break;

	case EIOCPOLLSTART:
	    sndsEndPollStart (pDrvCtrl);
	    break;

	case EIOCPOLLSTOP:
	    sndsEndPollStop (pDrvCtrl);
	    break;

    case EIOCGMIB2:
         if (data == NULL)
            return (EINVAL);
            bcopy((char *)&pDrvCtrl->end.mib2Tbl, (char *)data,
            sizeof(pDrvCtrl->end.mib2Tbl));
            break;
    
    case EIOCGFBUF:
         if (data == NULL)
             return (EINVAL);
            *(int *)data = 0;	/**END_MIN_FBUF;**/
            break;

    default:
            error = EINVAL;
        }

    return (error);
    }

/******************************************************************************
*
* sndsEndConfig - reconfigure the interface under us.
*
* Reconfigure the interface setting promiscuous mode
*
* RETURNS: N/A.
*/

LOCAL void sndsEndConfig
    (
    END_DEVICE *pDrvCtrl	/* device to be re-configured */
    )
    {
	sndsEndReset(pDrvCtrl);	/* reset the chip */

    /* Set up address filter for multicasting. */
	
    if (END_MULTI_LST_CNT(&pDrvCtrl->end) > 0)
		sndsEndAddrFilterSet (pDrvCtrl);

	if (pDrvCtrl->fdInitialized == TRUE)
		sndsEndFdFree(pDrvCtrl);	/* Free the FDs */
	sndsEndFdInitialize(pDrvCtrl);	/* Reinitialize FDs */
	sndsEndMacInitialize(pDrvCtrl);	/* Initialize MAC */

	/* Was started before in interrupt mode? */
	if ((END_FLAGS_GET(&pDrvCtrl->end) & IFF_RUNNING) && \
		((pDrvCtrl->flags & LS_POLLING) == 0))
			sndsEndStart(pDrvCtrl);	/* Start again */

    return;
    }

/*******************************************************************************
*
* sndsEndPollStart - start polled mode operations
*
* RETURNS: OK or ERROR.
*/

LOCAL STATUS sndsEndPollStart
    (
    END_DEVICE* pDrvCtrl	/* device to be polled */
    )
    {

    int         oldLevel;
	BDMARXCON bdmaRxCon;
	MACRXCON macRxCon;

    oldLevel = intLock ();          /* disable ints during update */

	intDisable (pDrvCtrl->ivecBdmaTx);
	intDisable (pDrvCtrl->ivecBdmaRx);
	intDisable (pDrvCtrl->ivecMacTx);
	intDisable (pDrvCtrl->ivecMacRx);


    pDrvCtrl->flags |= LS_POLLING;

    intUnlock (oldLevel);   /* now sndsEndInt won't get confused */

    ENDLOGMSG (("STARTED\n", 1, 2, 3, 4, 5, 6));

    sndsEndConfig (pDrvCtrl);	/* reconfigure device */

	/* Enable RX in BDMARXCON register */
	*(UINT32 *) (&bdmaRxCon) = *(UINT32 *)SNDS_BDMARXCON;
	bdmaRxCon.rxCon_reg.enable = 1 ;
	*(UINT32 *)SNDS_BDMARXCON = bdmaRxCon.rxCon_resetval;


	/* Enable RX in MACRXCON register */
	*(UINT32 *)(&macRxCon) = *(UINT32 *)SNDS_MACRXCON;
	macRxCon.macRxCon_reg.receiveEnable = 1;
	*(UINT32 *)SNDS_MACRXCON = macRxCon.macRxCon_resetval;

	/* Set the flags to indicate that the device is up */
	END_FLAGS_SET (&pDrvCtrl->end, IFF_UP | IFF_RUNNING);

    return (OK);
    }

/*******************************************************************************
*
* sndsEndPollStop - stop polled mode operations
*
* This function terminates polled mode operation.  The device returns to
* interrupt mode.
*
* The device interrupts are enabled, the current mode flag is switched
* to indicate interrupt mode and the device is then reconfigured for
* interrupt operation.
*
* RETURNS: OK or ERROR.
*/

LOCAL STATUS sndsEndPollStop
    (
    END_DEVICE* pDrvCtrl	/* device to be changed */
    )
    {
	BDMARXCON bdmaRxCon;
	BDMATXCON bdmaTxCon;
	MACCON	  macCon;
    int         oldLevel;

	*(UINT32 *)(&bdmaRxCon) = *(UINT32 *)SNDS_BDMARXCON;
	bdmaRxCon.rxCon_reg.enable = 0;
	*(UINT32 *)SNDS_BDMARXCON = *(UINT32 *)(&bdmaRxCon);

	*(UINT32 *)(&bdmaTxCon) = *(UINT32 *)SNDS_BDMATXCON;
	bdmaTxCon.txCon_reg.enable = 0;
	*(UINT32 *)SNDS_BDMATXCON = *(UINT32 *)(&bdmaTxCon);

	*(UINT32 *)(&macCon) = *(UINT32 *)SNDS_MACCON;
	macCon.macCon_reg.haltImm  = 1;
	*(UINT32 *)SNDS_MACCON = *(UINT32 *)(&macCon);

    oldLevel = intLock ();	/* disable ints during register updates */

    pDrvCtrl->flags &= ~LS_POLLING;

    intUnlock (oldLevel);

	/*
	 * Restart in interrupt mode.  Calling sndsEndConfig without clearing
	 * IFF_RUNNING flag will result in calling sndsEndStart automatically
	 */
    sndsEndConfig (pDrvCtrl);

    ENDLOGMSG (("STOPPED\n", 1, 2, 3, 4, 5, 6));
	return (OK);
	}

/*******************************************************************************
*
* sndsEndPollRcv - routine to receive a packet in polled mode.
*
* This routine is called by a user to try and get a packet from the
* device.
*
* RETURNS: OK upon success.  EAGAIN is returned when no packet is available.
*/

LOCAL STATUS sndsEndPollRcv
    (
    END_DEVICE *pDrvCtrl,	/* device to be polled */
    M_BLK_ID pMblk		/* ptr to buffer */
	)
    {

	BDMASTAT bdmaStat;
    char* pPacket;
    int len;
	STATUS retVal = EAGAIN;

	#ifdef ENDDEBUG
		if (endDebug)
		nvLogMsg ("sndsEndPollRcv\n", 1, 2, 3, 4, 5, 6);
	#endif /* ENDDEBUG */

	bdmaStat.stat_resetval = *(UINT32 *)SNDS_BDMASTAT;

	if (bdmaStat.stat_reg.bdmaRxDoneEveryRxFrame == 0)
		return retVal;

	/* Reset the status nit */
	*(UINT32 *)SNDS_BDMASTAT = bdmaStat.stat_resetval;

	if (gpReceiveFrameDescStart->rxStatusLength.good == 0)
		goto pollRcvExit;

    /* Upper layer must provide a valid buffer. */

	len =  gpReceiveFrameDescStart->rxStatusLength.frameLength;

    if ((pMblk->mBlkHdr.mLen < len) || (!(pMblk->mBlkHdr.mFlags & M_EXT)))
		goto pollRcvExit;

    END_ERR_ADD (&pDrvCtrl->end, MIB2_IN_UCAST, +1);

	pPacket = (char *)gpReceiveFrameDescStart->rxFrameData.frameDataPtr;
	bcopy (pPacket, pMblk->m_data, len);
    pMblk->m_len = len;
	pMblk->mBlkHdr.mData += SNDS_DATA_OFFSET;
    pMblk->mBlkHdr.mFlags |= M_PKTHDR;
    pMblk->mBlkPktHdr.len = len;


	retVal = OK;

#ifdef ENDDEBUG
		    if (endDebug)
	nvLogMsg ("sndsEndPollRcv OK\n", 1, 2, 3, 4, 5, 6);
#endif /* ENDDEBUG */

pollRcvExit:
	gpReceiveFrameDescStart->rxFrameData.o_bit = 1;	/* Ownership back to BDMA */
	*(UINT32 *)(&gpReceiveFrameDescStart->rxStatusLength) = 0;	/* Rx status length field */

	gpReceiveFrameDescStart = gpReceiveFrameDescStart->nextRxFrameDesc;
	return retVal;
	
    }

/*******************************************************************************
*
* sndsEndPollSend - routine to send a packet in polled mode.
*
* This routine is called by a user to try and send a packet on the
* device.
*
* RETURNS: OK upon success.  EAGAIN if device is busy.
*/

LOCAL STATUS sndsEndPollSend
    (
    END_DEVICE* pDrvCtrl,	/* device to be polled */
    M_BLK_ID pMblk		/* packet to send */
    )
    {
	TRANSMIT_FRAME_DESC *pTxFd;
	BDMATXCON bdmaTxCon;
	MACTXCON macTxCon;
    int         len;

#ifdef ENDDEBUG
    if (endDebug)
	nvLogMsg ("sndsEndPollSend\n", 1, 2, 3, 4, 5, 6);
#endif /* ENDDEBUG */

	if (gpTransmitFrameDescStart->txFrameData.o_bit)	/* Ownership with BDMA? */
		return EAGAIN;
	pTxFd = gpTransmitFrameDescStart;
	len = pMblk->mBlkPktHdr.len;

    /* Set pointers in local structures to point to data. */
	netMblkToBufCopy(pMblk, (void *)pTxFd->txFrameData.frameDataPtr, NULL) ;

	*(UINT32 *)(&pTxFd->txControl) = 0;	/* Reset control word */
	pTxFd->txControl.t_bit = 1;
	pTxFd->txControl.a_bit = 1;
	pTxFd->txControl.l_bit = 1;

	pTxFd->txStatusLength.frameLength = len;
	pTxFd->txFrameData.o_bit = 1;

    /* initiate device transmit */
	bdmaTxCon.txCon_resetval = *(UINT32 *)SNDS_BDMATXCON;
	bdmaTxCon.txCon_reg.enable = 1;
	*(UINT32 *)SNDS_BDMATXCON = bdmaTxCon.txCon_resetval;

	macTxCon.macTxCon_resetval = *(UINT32 *)SNDS_MACTXCON;
	macTxCon.macTxCon_reg.transmitEnable = 1;
	*(UINT32 *)SNDS_MACTXCON = macTxCon.macTxCon_resetval;

    /* Bump the statistic counter. */

    END_ERR_ADD (&pDrvCtrl->end, MIB2_OUT_UCAST, +1);

    /* Advance our management index */
	gpTransmitFrameDescStart = gpTransmitFrameDescStart->nextTxFrameDesc;

    /*
     * Cleanup.  The driver must either free the packet now or
     * set up a structure so it can be freed later after a transmit
     * interrupt occurs.
     */
	netMblkClChainFree (pMblk);

#ifdef ENDDEBUG
    if (endDebug)
	nvLogMsg ("leaving sndsEndPollSend\n", 1, 2, 3, 4, 5, 6);
#endif /* ENDDEBUG */

    return (OK);
    }

/******************************************************************************
*
* sndsEndAddrFilterSet - set the address filter for multicast addresses
*
* This routine goes through all of the multicast addresses on the list
* of addresses (added with the endAddrAdd() routine) and sets the
* device's filter correctly.
*
* RETURNS: N/A.
*/

LOCAL void sndsEndAddrFilterSet
    (
    END_DEVICE *pDrvCtrl	/* device to be updated */
	)
    {
    ETHER_MULTI* pCurr;
    UINT32 count;
	UCHAR *pAddr;

	for (count = 0; count < 32; count++)
		pDrvCtrl->addrList[count] = 0;	/* Zero the addresses */
	pDrvCtrl->mcastAddrCount = 0;		/* Init the multi count */
	pAddr = (UCHAR *)(&pDrvCtrl->addrList[0]);
	pAddr += 6;		/*  Leave first 6 bytes for our MAC address */
    pCurr = END_MULTI_LST_FIRST (&pDrvCtrl->end);

	/*
	 * Now copy the addresses from ether_multi_list to our own array.  In our
	 * array, the first 6 bytes are for our own MAC address.  This array is
	 * an exact replica of the internal CAM registers of Ethernet controller.
	 * The CAM registers will be updated in sndsEndMacInitialize() function
	 */
    while (pCurr != NULL)
		{
		if (pDrvCtrl->mcastAddrCount > SNDS_MAX_MULTI)
			break;
		if (!(pDrvCtrl->mcastAddrCount & 0x01))
			{
			pAddr -= 2;
			/* The address has to be stored in a swapped fashion! */
			*(UINT16 *)pAddr = htons (*(UINT16 *)pCurr->addr);
			pAddr += 4;
			*(UINT16 *)pAddr = htons (*(UINT16 *)(pCurr->addr+4));
			pAddr += 2;
			*(UINT16 *)pAddr = htons (*(UINT16 *)(pCurr->addr+2));
			}
		else
			{
			pAddr += 2;
			/* The address has to be stored in a swapped fashion! */
			*(UINT16 *)pAddr = htons (*(UINT16 *)(pCurr->addr+2));
			pAddr += 2;
			*(UINT16 *)pAddr = htons (*(UINT16 *)pCurr->addr);
			pAddr += 4;
			*(UINT16 *)pAddr = htons (*(UINT16 *)(pCurr->addr+4));
			}
		pDrvCtrl->mcastAddrCount++;		/* Bump the multicast address count */
	
		pCurr = END_MULTI_LST_NEXT(pCurr);	/* Get the next address in the list */
		}
    }

/*****************************************************************************
*
* sndsEndMCastAdd - add a multicast address for the device
*
* This routine adds a multicast address to whatever the driver
* is already listening for.  It then resets the address filter.
*
* RETURNS: OK or ERROR.
*/

LOCAL STATUS sndsEndMCastAdd
    (
    END_DEVICE *pDrvCtrl,	/* device pointer */
    char* pAddress		/* new address to add */
    )
    {
    int error;

    if ((error = etherMultiAdd (&pDrvCtrl->end.multiList,
		pAddress)) == ENETRESET)
	    sndsEndConfig (pDrvCtrl);

    return (OK);