;
; Copyright (c) Microsoft Corporation.  All rights reserved.
;
;
; Use of this source code is subject to the terms of the Microsoft end-user
; license agreement (EULA) under which you licensed this SOFTWARE PRODUCT.
; If you did not accept the terms of the EULA, you are not authorized to use
; this source code. For a copy of the EULA, please see the LICENSE.RTF on your
; install media.
;

; Our variables
#define BUILTIN_ROOT HKEY_LOCAL_MACHINE\Drivers\BuiltIn
#define DRIVERS_DIR $(_PUBLICROOT)\common\oak\drivers


; @CESYSGEN IF WCESHELLFE_MODULES_CTLPNL
; This registry setting controls the checkboxes displayed in the Sounds CPL
; under "enable clicks & taps". Set bit0 if you have a keyboard, set bit1 if
; you have a touch screen. Set bit2 if you have HW buttons (NOTE: for now
; HW buttons are mutually exclusive with the keyboard)
[HKEY_LOCAL_MACHINE\ControlPanel]
    "InputConfig"=dword:3   ; 3 => keybd and touch screen
; @CESYSGEN ENDIF WCESHELLFE_MODULES_CTLPNL

; @CESYSGEN IF WCESHELLFE_MODULES_EXPLORER
; @CESYSGEN ENDIF WCESHELLFE_MODULES_EXPLORER


; @CESYSGEN IF CE_MODULES_DEVICE

; HIVE BOOT SECTION
[HKEY_LOCAL_MACHINE\Drivers\Resources\IRQ]
   "Identifier"=dword:1
   "Minimum"=dword:1
   "Space"=dword:20
   "Ranges"="1-0x20"
;  "Shared"=""

[HKEY_LOCAL_MACHINE\Drivers\Resources\IO]
   "Identifier"=dword:2
   "Minimum"=dword:0
   "Space"=dword:10000
   "Ranges"="0-0xFFFF"
; END HIVE BOOT SECTION


; @CESYSGEN IF CE_MODULES_BATTDRVR
#include "$(DRIVERS_DIR)\battdrvr\battdrvr.reg"
; @CESYSGEN ENDIF CE_MODULES_BATTDRVR

; @CESYSGEN IF CE_MODULES_NLEDDRVR
#include "$(DRIVERS_DIR)\nleddrvr\nleddrvr.reg"
; @CESYSGEN ENDIF CE_MODULES_NLEDDRVR

; @CESYSGEN IF CE_MODULES_POINTER   
[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\TOUCH]
  "MaxCalError"=dword:7
; portrait 
  "CalibrationData"="466,623 149,163 145,1101 798,1097 792,160 "
;  "CalibrationData"="500,512 762,268 758,760 244,758 241,266 "
; Landscape 
;   "CalibrationData"="515,503 763,748 258,749 269,255 764,255 "
; @CESYSGEN ENDIF CE_MODULES_POINTER   

; @CESYSGEN IF CE_MODULES_SERIAL
;=============== UART0 (physical COM1 connector P1) (Serial) ===============
IF BSP_NOSERIAL !
#include "$(_TARGETPLATROOT)\src\drivers\serial\ser_smdk2440.reg"
ENDIF BSP_NOSERIAL !
;=========== End of UART(Serial) ===============
; @CESYSGEN ENDIF CE_MODULES_SERIAL

; @CESYSGEN IF CE_MODULES_KEYBD
; Keybd driver is the same.
IF BSP_NOKEYBD !
#include "$(DRIVERS_DIR)\keybd\keybd.reg"

[HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD]
    "DriverName"="kbdmouse.dll"
    "Irq"=dword:1
    "IOBase"=dword:B1600000
    "SSPBase"=dword:B1900000

#include "$(DRIVERS_DIR)\keybd\LayMgr.reg"

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Layouts\$(input_locale)]
	"Matrix"="kbdmouse.dll"


; @CESYSGEN IF CE_MODULES_KBDA1
; @CESYSGEN ENDIF CE_MODULES_KBDA1

; @CESYSGEN IF CE_MODULES_KBDHEB
; @CESYSGEN ENDIF CE_MODULES_KBDHEB

; @CESYSGEN IF CE_MODULES_KBDTH0
; @CESYSGEN ENDIF CE_MODULES_KBDTH0

; @CESYSGEN IF CE_MODULES_KBDINHIN
; @CESYSGEN ENDIF CE_MODULES_KBDINHIN

; @CESYSGEN IF CE_MODULES_KBDINMAR
; @CESYSGEN ENDIF CE_MODULES_KBDINMAR

; @CESYSGEN IF CE_MODULES_KBDINPUN
; @CESYSGEN ENDIF CE_MODULES_KBDINPUN

; @CESYSGEN IF CE_MODULES_KBDINTEL
; @CESYSGEN ENDIF CE_MODULES_KBDINTEL

; @CESYSGEN IF CE_MODULES_KBDINGUJ
; @CESYSGEN ENDIF CE_MODULES_KBDINGUJ

; @CESYSGEN IF CE_MODULES_KBDINKAN
; @CESYSGEN ENDIF CE_MODULES_KBDINKAN

; @CESYSGEN IF CE_MODULES_KBDINTAM
; @CESYSGEN ENDIF CE_MODULES_KBDINTAM

; @CESYSGEN IF CE_MODULES_KBDDV
; @CESYSGEN ENDIF CE_MODULES_KBDDV

ENDIF BSP_NOKEYBD !
; @CESYSGEN ENDIF CE_MODULES_KEYBD


; @CESYSGEN IF CE_MODULES_PCCARD
IF BSP_NOPCCARD !
#include "$(_TARGETPLATROOT)\src\drivers\pccard\pcc_smdk2440.reg"
#include "$(DRIVERS_DIR)\pccard\mdd\pcc_serv.reg"
[HKEY_LOCAL_MACHINE\Drivers\PCCARD\PCMCIA\TEMPLATE\PCMCIA]
   "Dll"="pcmcia.dll"
   "NoConfig"=dword:1
   "NoISR"=dword:1 ; Do not load any ISR.
   "IClass"=multi_sz:"{6BEAB08A-8914-42fd-B33F-61968B9AAB32}=PCMCIA Card Services"
ENDIF BSP_NOPCCARD !
; @CESYSGEN ENDIF CE_MODULES_PCCARD

; @CESYSGEN IF CE_MODULES_SDBUS
; @CESYSGEN ENDIF CE_MODULES_SDBUS


IF BSP_NOPWRBTN !
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\PBUT2440]
    "Dll"="pwrbtn2440.dll"
    "Prefix"="DSK"
    "Index"=dword:2
    "Order"=dword:2
    "Ioctl"=dword:4
    "FSD"= "fatfs.dll"
ENDIF BSP_NOPWRBTN !


IF BSP_NOAUDIO !
; @CESYSGEN IF CE_MODULES_WAVEAPI
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\Audio]
   "Prefix"="WAV"
   "Dll"="s3c2440x_wavedev.dll"
   "Index"=dword:1
   "Order"=dword:0
; @CESYSGEN ENDIF CE_MODULES_WAVEAPI
ENDIF BSP_NOAUDIO !


;================= USB =================
; @CESYSGEN IF CE_MODULES_USBD
; @CESYSGEN ENDIF CE_MODULES_USBD

; @CESYSGEN IF CE_MODULES_USBFN
; @CESYSGEN ENDIF CE_MODULES_USBFN


; @CESYSGEN ENDIF CE_MODULES_DEVICE


; HIVE BOOT SECTION
; @CESYSGEN IF CE_MODULES_SDNPCID
; @CESYSGEN ENDIF CE_MODULES_SDNPCID
; END HIVE BOOT SECTION

; HIVE BOOT SECTION
; @CESYSGEN IF CE_MODULES_SDNPCID_IMGUPD
; @CESYSGEN ENDIF CE_MODULES_SDNPCID_IMGUPD
; END HIVE BOOT SECTION

; @CESYSGEN IF CE_MODULES_DISPLAY
IF BSP_NODISPLAY !
[HKEY_LOCAL_MACHINE\Drivers\Display\S3C2440\CONFIG]
	"DisplayDll"="s3c2440x_lcd.dll"
	"LCDVirtualFrameBase"=dword:ac100000
	"LCDPhysicalFrameBase"=dword:30100000

[HKEY_LOCAL_MACHINE\System\GDI\Drivers]
    "Display"="s3c2440x_lcd.dll"

; S2440 IrDA(UART2)
[HKEY_LOCAL_MACHINE\Drivers\BuiltIn\IRDA2440]
   "DeviceArrayIndex"=dword:1
   "Irq"=dword:09
   "IoBase"=dword:50008000
   "IoLen"=dword:2C
   "Prefix"="COM"
   "IClass"="{CC5195AC-BA49-48a0-BE17-DF6D1B0173DD}"
   "Dll"="IRDA2440.Dll"
   "Order"=dword:0
   "Priority"=dword:0
   "Port"="COM3:"
   "DeviceType"=dword:0  ; IRDA modem, 0 -> null modem
   "FriendlyName"="S2440 IRDA2440"
;   "Index"=dword:2

; GWES will pass this value to the LCD driver; the driver will open the
; key to which it points to read its configuration.
[HKEY_LOCAL_MACHINE\System\GDI\DisplayCandidates]
	"Candidate10"="Drivers\\Display\\S3C2440\\CONFIG"
ENDIF BSP_NODISPLAY !
; @CESYSGEN ENDIF CE_MODULES_DISPLAY

; ----------------------------------------------------------------------------
; Select a Direct3D Mobile Driver

; @CESYSGEN IF DIRECTX_MODULES_D3DM
IF BSP_D3DM_NULL
IF BSP_D3DM_NULL_REMOTE
[HKEY_LOCAL_MACHINE\System\D3DM\Drivers]
   "RemoteHook"="d3dm_nulldrv.dll"
ELSE
[HKEY_LOCAL_MACHINE\System\D3DM\Drivers]
   "LocalHook"="d3dm_nulldrv.dll"
ENDIF BSP_D3DM_NULL_REMOTE
ENDIF BSP_D3DM_NULL
; @CESYSGEN ENDIF DIRECTX_MODULES_D3DM