/****************************************Copyright (c)**************************************************
**                               SHENZHEN GUSSMANN Co.,LTD.
**                                      graduate school
**                                 http://www.gussmann.com.cn
**
**--------------File Info-------------------------------------------------------------------------------
** File Name: config.h
** Last modified Date:  2004-09-17
** Last Version: 1.0
** Descriptions: User Configurable File
**
**------------------------------------------------------------------------------------------------------
** Created By: wencongai
** Created date:   2004-09-17
** Version: 1.0
** Descriptions: First version
**
**------------------------------------------------------------------------------------------------------
** Modified by:
** Modified date:
** Version:
** Descriptions:
**
********************************************************************************************************/
#ifndef __CONFIG_H 
#define __CONFIG_H

//This segment should not be modified
#ifndef TRUE
#define TRUE  1
#endif

#ifndef FALSE
#define FALSE 0
#endif

typedef unsigned char  uint8;                   /* defined for unsigned 8-bits integer variable 	無符號8位整型變量  */
typedef signed   char  int8;                    /* defined for signed 8-bits integer variable		有符號8位整型變量  */
typedef unsigned short uint16;                  /* defined for unsigned 16-bits integer variable 	無符號16位整型變量 */
typedef signed   short int16;                   /* defined for signed 16-bits integer variable 		有符號16位整型變量 */
typedef unsigned int   uint32;                  /* defined for unsigned 32-bits integer variable 	無符號32位整型變量 */
typedef signed   int   int32;                   /* defined for signed 32-bits integer variable 		有符號32位整型變量 */
typedef float          fp32;                    /* single precision floating point variable (32bits) 單精度浮點數（32位長度） */
typedef double         fp64;                    /* double precision floating point variable (64bits) 雙精度浮點數（64位長度） */

/********************************/
/*      ARM specital code      */
/*      ARM的特殊代碼           */
/********************************/
//This segment should not be modify
//這一段無需改動

#include    "LPC2294.h"
//以下根據需要改動
#include    "main.h"
#include    "LCM19264.H"
#include    "I2CINT24c256.H"
#include    "I2CINT.H"
#include    "I2C1INT.H"
#include    "spi.h"
#include    "ZLG7290.H"
#include    "DataRet.h"
#include    "rtc.h"
#include    "menu.h"
#include    "displaymenu.h"
#include    "rfid.h"
#include    "modem.h"
#include    "timer.h"
#include    "WatchDog.h"

#include <string.h>
#include <ctype.h>
#include <stdio.h>

void  Timer0_Handler(void);
void  UART0_Handler(void); 
void  UART1_Handler(void); 
void  RTC_Handler(void); 
void  I2C_Handler(void); 
void  Eint3_Handler(void);
void  SPI0_Handler(void);  
/**************************************/
#define SOF_DEBUG
//#define DEBUG
#define V10
//#define USERFID
//#define USEGSM
#define DISPLAY_GPS
//#define  DEBUG_PSOC_KEYBOARD
//#define  USE_WATCHDOG
//#define TEST_RFID
//#pragma arm section rodata
//#define DISPLAYGSMMSG

//#define USE_UBOX_GPS
#ifdef USE_UBOX_GPS
   #define UART1_BAUDE 9600
#else 
   #define UART1_BAUDE 4800
#endif
/********************************/
/*Application Program Configurations*/
/*     應用程序配置             */
/********************************/
//This segment could be modified as needed.
//以下根據需要改動

/********************************/
/*Configuration of the example */
/*     本例子的配置             */
/********************************/
/* System configuration .Fosc、Fcclk、Fcco、Fpclk must be defined */
/* 系統設置, Fosc、Fcclk、Fcco、Fpclk必須定義*/
#define SYSTEMCLOCK 1
#define Fosc            11059200                    //Crystal frequence,10MHz~25MHz，should be the same as actual status. 
						    //應當與實際一至晶振頻率,10MHz~25MHz，應當與實際一至
#define Fcclk           (Fosc * SYSTEMCLOCK)                  //System frequence,should be (1~32)multiples of Fosc,and should be equal or less  than 60MHz. 
						    //系統頻率，必須為Fosc的整數倍(1~32)，且<=60MHZ
#define Fcco            (Fcclk * 4)                 //CCO frequence,should be 2、4、8、16 multiples of Fcclk, ranged from 156MHz to 320MHz. 
						    //CCO頻率，必須為Fcclk的2、4、8、16倍，范圍為156MHz~320MHz
#define Fpclk           (Fcclk / 4) * 1             //VPB clock frequence , must be 1、2、4 multiples of (Fcclk / 4).
						    //VPB時鐘頻率，只能為(Fcclk / 4)的1、2、4倍

#include    "target.h"              //This line may not be deleted 這一句不能刪除

#endif
/*********************************************************************************************************
**                            End Of File
********************************************************************************************************/