?? boot.lis
字號:
0000 ; Generated by PSoC Designer ver 4.2 b1013 : 02 September, 2004
0000 ;
0000 ;@Id: boot.tpl#15 @
0000 ;=============================================================================
0000 ; FILENAME: boot.asm
0000 ; VERSION: 4.15
0000 ; DATE: 18 August 2004
0000 ;
0000 ; DESCRIPTION:
0000 ; M8C Boot Code for CY8C21x34 microcontroller devices.
0000 ;
0000 ; Copyright (C) Cypress MicroSystems 2000-2004. All rights reserved.
0000 ;
0000 ; NOTES:
0000 ; PSoC Designer's Device Editor uses a template file, BOOT.TPL, located in
0000 ; the project's root directory to create BOOT.ASM. Any changes made to
0000 ; BOOT.ASM will be overwritten every time the project is generated; therfore
0000 ; changes should be made to BOOT.TPL not BOOT.ASM. Care must be taken when
0000 ; modifying BOOT.TPL so that replacement strings (such as @PROJECT_NAME)
0000 ; are not accidentally modified.
0000 ;
0000 ;=============================================================================
0000
0000 CPU_CLOCK: equ 0h ;CPU clock value
0007 CPU_CLOCK_MASK: equ 7h ;CPU clock mask
0000 CPU_CLOCK_JUST: equ 0h ;CPU clock value justified
0000 SLEEP_TIMER: equ 0h ;Sleep Timer value
0018 SLEEP_TIMER_MASK: equ 18h ;Sleep Timer mask
0000 SLEEP_TIMER_JUST: equ 0h ;Sleep Timer value justified
0001 SWITCH_MODE_PUMP: equ 1h ;Switch Mode Pump setting
0080 SWITCH_MODE_PUMP_MASK: equ 80h ;Switch Mode Pump mask
0080 SWITCH_MODE_PUMP_JUST: equ 80h ;Switch Mode Pump justified
0000 LVD_TBEN: equ 0 ; Low Voltage Throttle-back enable value
0008 LVD_TBEN_MASK: equ 8 ; Low Voltage Throttle-back enable mask
0000 LVD_TBEN_JUST: equ 0 ; Low Voltage Throttle-back enable justified
0007 TRIP_VOLTAGE: equ 7h ;Trip Voltage value
0007 TRIP_VOLTAGE_MASK: equ 7h ;Trip Voltage mask
0007 TRIP_VOLTAGE_JUST: equ 7h ;Trip Voltage justified
0000
0010 POWER_SETTING: equ 10h
0010 POWER_SET_5V0: equ 10h ; MASK for 5.0V operation, fast and slow
0010 POWER_SET_5V0_24MHZ: equ 10h ; Power Setting value for 5.0V fast
0011 POWER_SET_5V0_6MHZ: equ 11h ; Power Setting value for 5.0V slow
0008 POWER_SET_3V3: equ 08h ; MASK for 3.3V operation, fast and slow
0008 POWER_SET_3V3_24MHZ: equ 08h ; Power Setting value for 3.3V fast
0009 POWER_SET_3V3_6MHZ: equ 09h ; Power Setting value for 3.3V slow
0006 POWER_SET_2V7: equ 06h ; MASK for 2.7V operation, fast and slow
0004 POWER_SET_2V7_12MHZ: equ 04h ; MASK for 2.7V, 12MHZ operation
0002 POWER_SET_2V7_6MHZ: equ 02h ; MASK for 2.7V, 6MHZ operation
0001 POWER_SET_SLOW_IMO: equ 01h ; MASK for slow Internal Main Oscillator (IMO)
0000
0000 COMM_RX_PRESENT: equ 0 ;1 = TRUE
0000 WATCHDOG_ENABLE: equ 0 ;Watchdog Enable 1 = Enable
0000
0000 CLOCK_DIV_VC1: equ 0h ;VC1 clock divider
00F0 CLOCK_DIV_VC1_MASK: equ f0h ;VC1 clock divider mask
0000 CLOCK_DIV_VC1_JUST: equ 0h ;VC1 clock divider justified
0000 CLOCK_DIV_VC2: equ 0h ;VC2 clock divider
000F CLOCK_DIV_VC2_MASK: equ fh ;VC2 clock divider mask
0000 CLOCK_DIV_VC2_JUST: equ 0h ;VC2 clock divider justified
0000 CLOCK_INPUT_VC3: equ 0h ;VC3 clock source
0003 CLOCK_INPUT_VC3_MASK: equ 3h ;VC3 clock source mask
0000 CLOCK_INPUT_VC3_JUST: equ 0h ;VC3 clock source justified
0000 CLOCK_DIV_VC3: equ 0h ;VC3 clock divider
00FF CLOCK_DIV_VC3_MASK: equ ffh ;VC3 clock divider mask
0000 CLOCK_DIV_VC3_JUST: equ 0h ;VC3 clock divider justified
0000 SYSCLK_SOURCE: equ (0h | 0h) ;SysClk Source setting
0006 SYSCLK_SOURCE_MASK: equ (4h | 2h) ;SysClk Source setting mask
0000 SYSCLK_SOURCE_JUST: equ (0h | 0h) ;SysClk Source setting justified
0000 SYSCLK_2_DISABLE: equ 0h ;SysClk*2 Disable setting
0001 SYSCLK_2_DISABLE_MASK: equ 1h ;SysClk*2 Disable setting mask
0000 SYSCLK_2_DISABLE_JUST: equ 0h ;SysClk*2 Disable setting justified
0000 ;
0000 ; register initial values
0000 ;
0000 ANALOG_IO_CONTROL: equ 0h ;Analog IO Control register (ABF_CR)
0000 PORT_0_GLOBAL_SELECT: equ 0h ;Port 0 global select register (PRT0GS)
0000 PORT_0_DRIVE_0: equ 0h ;Port 0 drive mode 0 register (PRT0DM0)
00FF PORT_0_DRIVE_1: equ ffh ;Port 0 drive mode 1 register (PRT0DM1)
00FF PORT_0_DRIVE_2: equ ffh ;Port 0 drive mode 2 register (PRT0DM2)
0000 PORT_0_INTENABLE: equ 0h ;Port 0 interrupt enable register (PRT0IE)
0000 PORT_0_INTCTRL_0: equ 0h ;Port 0 interrupt control 0 register (PRT0IC0)
0000 PORT_0_INTCTRL_1: equ 0h ;Port 0 interrupt control 1 register (PRT0IC1)
0000 PORT_1_GLOBAL_SELECT: equ 0h ;Port 1 global select register (PRT1GS)
0000 PORT_1_DRIVE_0: equ 0h ;Port 1 drive mode 0 register (PRT1DM0)
00FF PORT_1_DRIVE_1: equ ffh ;Port 1 drive mode 1 register (PRT1DM1)
00FF PORT_1_DRIVE_2: equ ffh ;Port 1 drive mode 2 register (PRT1DM2)
0000 PORT_1_INTENABLE: equ 0h ;Port 1 interrupt enable register (PRT1IE)
0000 PORT_1_INTCTRL_0: equ 0h ;Port 1 interrupt control 0 register (PRT1IC0)
0000 PORT_1_INTCTRL_1: equ 0h ;Port 1 interrupt control 1 register (PRT1IC1)
0000 PORT_2_GLOBAL_SELECT: equ 0h ;Port 2 global select register (PRT2GS)
007F PORT_2_DRIVE_0: equ 7fh ;Port 2 drive mode 0 register (PRT2DM0)
0080 PORT_2_DRIVE_1: equ 80h ;Port 2 drive mode 1 register (PRT2DM1)
0080 PORT_2_DRIVE_2: equ 80h ;Port 2 drive mode 2 register (PRT2DM2)
0000 PORT_2_INTENABLE: equ 0h ;Port 2 interrupt enable register (PRT2IE)
0000 PORT_2_INTCTRL_0: equ 0h ;Port 2 interrupt control 0 register (PRT2IC0)
0000 PORT_2_INTCTRL_1: equ 0h ;Port 2 interrupt control 1 register (PRT2IC1)
0000 PORT_3_GLOBAL_SELECT: equ 0h ;Port 3 global select register (PRT3GS)
0000 PORT_3_DRIVE_0: equ 0h ;Port 3 drive mode 0 register (PRT3DM0)
0000 PORT_3_DRIVE_1: equ 0h ;Port 3 drive mode 1 register (PRT3DM1)
0000 PORT_3_DRIVE_2: equ 0h ;Port 3 drive mode 2 register (PRT3DM2)
0000 PORT_3_INTENABLE: equ 0h ;Port 3 interrupt enable register (PRT3IE)
0000 PORT_3_INTCTRL_0: equ 0h ;Port 3 interrupt control 0 register (PRT3IC0)
0000 PORT_3_INTCTRL_1: equ 0h ;Port 3 interrupt control 1 register (PRT3IC1)
0000
0000 ; end of file GlobalParams.inc
00C0 FLAG_PGMODE_MASK: equ C0h ; Paging control for > 256 bytes of RAM
0000 FLAG_PGMODE_0: equ 00h ; Direct to Page 0, indexed to Page 0
0040 FLAG_PGMODE_1: equ 40h ; Direct to Page 0, indexed to STK_PP page
0080 FLAG_PGMODE_2: equ 80h ; Direct to CUR_PP page, indexed to IDX_PP page
00C0 FLAG_PGMODE_3: equ C0h ; Direct to CUR_PP page, indexed to STK_PP page
0000 FLAG_PGMODE_00b: equ 00h ; Same as PGMODE_0
0040 FLAG_PGMODE_01b: equ 40h ; Same as PGMODE_1
0080 FLAG_PGMODE_10b: equ 80h ; Same as PGMODE_2
00C0 FLAG_PGMODE_11b: equ C0h ; Same as PGMODE_3
0010 FLAG_XIO_MASK: equ 10h ; I/O Bank select for register space
0008 FLAG_SUPER: equ 08h ; Supervisor Mode
0004 FLAG_CARRY: equ 04h ; Carry Condition Flag
0002 FLAG_ZERO: equ 02h ; Zero Condition Flag
0001 FLAG_GLOBAL_IE: equ 01h ; Glogal Interrupt Enable
0000
0000
0000 ;;=============================================================================
0000 ;; Register Space, Bank 0
0000 ;;=============================================================================
0000
0000 ;------------------------------------------------
0000 ; Port Registers
0000 ; Note: Also see this address range in Bank 1.
0000 ;------------------------------------------------
0000 ; Port 0
0000 PRT0DR: equ 00h ; Port 0 Data Register (RW)
0001 PRT0IE: equ 01h ; Port 0 Interrupt Enable Register (RW)
0002 PRT0GS: equ 02h ; Port 0 Global Select Register (RW)
0003 PRT0DM2: equ 03h ; Port 0 Drive Mode 2 (RW)
0000 ; Port 1
0004 PRT1DR: equ 04h ; Port 1 Data Register (RW)
0005 PRT1IE: equ 05h ; Port 1 Interrupt Enable Register (RW)
0006 PRT1GS: equ 06h ; Port 1 Global Select Register (RW)
0007 PRT1DM2: equ 07h ; Port 1 Drive Mode 2 (RW)
0000 ; Port 2
0008 PRT2DR: equ 08h ; Port 2 Data Register (RW)
0009 PRT2IE: equ 09h ; Port 2 Interrupt Enable Register (RW)
000A PRT2GS: equ 0Ah ; Port 2 Global Select Register (RW)
000B PRT2DM2: equ 0Bh ; Port 2 Drive Mode 2 (RW)
0000 ; Port 3
000C PRT3DR: equ 0Ch ; Port 3 Data Register (RW)
000D PRT3IE: equ 0Dh ; Port 3 Interrupt Enable Register (RW)
000E PRT3GS: equ 0Eh ; Port 3 Global Select Register (RW)
000F PRT3DM2: equ 0Fh ; Port 3 Drive Mode 2 (RW)
0000
0000 ;------------------------------------------------
0000 ; Digital PSoC(tm) block Registers
0000 ; Note: Also see this address range in Bank 1.
0000 ;------------------------------------------------
0000 ; Digital PSoC block 00, Basic Type B
0020 DBB00DR0: equ 20h ; data register 0 (#)
0021 DBB00DR1: equ 21h ; data register 1 (W)
0022 DBB00DR2: equ 22h ; data register 2 (RW)
0023 DBB00CR0: equ 23h ; control & status register 0 (#)
0000
0000 ; Digital PSoC block 01, Basic Type B
0024 DBB01DR0: equ 24h ; data register 0 (#)
0025 DBB01DR1: equ 25h ; data register 1 (W)
0026 DBB01DR2: equ 26h ; data register 2 (RW)
0027 DBB01CR0: equ 27h ; control & status register 0 (#)
0000
0000 ; Digital PSoC block 02, Communications Type B
0028 DCB02DR0: equ 28h ; data register 0 (#)
0029 DCB02DR1: equ 29h ; data register 1 (W)
002A DCB02DR2: equ 2Ah ; data register 2 (RW)
002B DCB02CR0: equ 2Bh ; control & status register 0 (#)
0000
0000 ; Digital PSoC block 03, Communications Type B
002C DCB03DR0: equ 2Ch ; data register 0 (#)
002D DCB03DR1: equ 2Dh ; data register 1 (W)
002E DCB03DR2: equ 2Eh ; data register 2 (RW)
002F DCB03CR0: equ 2Fh ; control & status register 0 (#)
0000
0000 ;-------------------------------------
0000 ; Analog Control Registers
0000 ;-------------------------------------
0060 AMX_IN: equ 60h ; Analog Input Multiplexor Control (RW)
000C AMX_IN_ACI1: equ 0Ch ; MASK: column 1 input mux
0003 AMX_IN_ACI0: equ 03h ; MASK: column 0 input mux
0000
0061 AMUXCFG: equ 61h ; Analog MUX Configuration
0030 AMUXCFG_INTCAP: equ 30h ;
000E AMUXCFG_MUXCLK: equ 0Eh ;
0001 AMUXCFG_EN: equ 01h ;
0000
0062 PWM_CR: equ 62h ; Pulse-Width Modulator Control
0038 PWM_CR_HIGH: equ 38h ; MASK: PWM high time
0006 PWM_CR_LOW: equ 06h ; MASK: PWM low time
0001 PWM_CR_EN: equ 01h ; MASK: Enable/Disable PWM function
0000
0064 CMP_CR0: equ 64h ; Analog Comparator Bus Register (#)
0020 CMP_CR0_COMP1: equ 20h ; MASK: Column 1 comparator state (R)
0010 CMP_CR0_COMP0: equ 10h ; MASK: Column 0 comparator state (R)
0002 CMP_CR0_AINT1: equ 02h ; MASK: Column 1 interrupt source (RW)
0001 CMP_CR0_AINT0: equ 01h ; MASK: Column 0 interrupt source (RW)
0000
0066 CMP_CR1: equ 66h ; Analog Comparator Bus 1 Register (RW)
?? 快捷鍵說明
復制代碼
Ctrl + C
搜索代碼
Ctrl + F
全屏模式
F11
切換主題
Ctrl + Shift + D
顯示快捷鍵
?
增大字號
Ctrl + =
減小字號
Ctrl + -