*              the last nested ISR has completed, uC/OS-II will call the scheduler to determine whether
*              a new, high-priority task, is ready to run.
*
* Arguments  : none
*
* Returns    : none
*
* Notes      : 1) You MUST invoke OSIntEnter() and OSIntExit() in pair.  In other words, for every call
*                 to OSIntEnter() at the beginning of the ISR you MUST have a call to OSIntExit() at the
*                 end of the ISR.
*              2) Rescheduling is prevented when the scheduler is locked (see OS_SchedLock())
*********************************************************************************************************
*/

void  OSIntExit (void) reentrant
{
#if OS_CRITICAL_METHOD == 3                                /* Allocate storage for CPU status register */
    OS_CPU_SR  cpu_sr = 0;
#endif



    if (OSRunning == OS_TRUE) {
        OS_ENTER_CRITICAL();
        if (OSIntNesting > 0) {                            /* Prevent OSIntNesting from wrapping       */
            OSIntNesting--;
        }
        if (OSIntNesting == 0) {                           /* Reschedule only if all ISRs complete ... */
            if (OSLockNesting == 0) {                      /* ... and not locked.                      */
                OS_SchedNew();
                if (OSPrioHighRdy != OSPrioCur) {          /* No Ctx Sw if current task is highest rdy */
                    OSTCBHighRdy  = OSTCBPrioTbl[OSPrioHighRdy];
#if OS_TASK_PROFILE_EN > 0
                    OSTCBHighRdy->OSTCBCtxSwCtr++;         /* Inc. # of context switches to this task  */
#endif
                    OSCtxSwCtr++;                          /* Keep track of the number of ctx switches */
                    OSIntCtxSw();                          /* Perform interrupt level ctx switch       */
                }
            }
        }
        OS_EXIT_CRITICAL();
    }
}

/*$PAGE*/
/*
*********************************************************************************************************
*                                          PREVENT SCHEDULING
*
* Description: This function is used to prevent rescheduling to take place.  This allows your application
*              to prevent context switches until you are ready to permit context switching.
*
* Arguments  : none
*
* Returns    : none
*
* Notes      : 1) You MUST invoke OSSchedLock() and OSSchedUnlock() in pair.  In other words, for every
*                 call to OSSchedLock() you MUST have a call to OSSchedUnlock().
*********************************************************************************************************
*/

#if OS_SCHED_LOCK_EN > 0
void  OSSchedLock (void) reentrant
{
#if OS_CRITICAL_METHOD == 3                      /* Allocate storage for CPU status register           */
    OS_CPU_SR  cpu_sr = 0;
#endif 

    if (OSRunning == OS_TRUE) {                  /* Make sure multitasking is running                  */
        OS_ENTER_CRITICAL();
        if (OSIntNesting == 0) {                 /* Can't call from an ISR                             */
            if (OSLockNesting < 255u) {          /* Prevent OSLockNesting from wrapping back to 0      */
                OSLockNesting++;                 /* Increment lock nesting level                       */
            }
        }
        OS_EXIT_CRITICAL();
    }
}
#endif

/*$PAGE*/
/*
*********************************************************************************************************
*                                          ENABLE SCHEDULING
*
* Description: This function is used to re-allow rescheduling.
*
* Arguments  : none
*
* Returns    : none
*
* Notes      : 1) You MUST invoke OSSchedLock() and OSSchedUnlock() in pair.  In other words, for every
*                 call to OSSchedLock() you MUST have a call to OSSchedUnlock().
*********************************************************************************************************
*/

#if OS_SCHED_LOCK_EN > 0
void  OSSchedUnlock (void) reentrant
{
#if OS_CRITICAL_METHOD == 3                                /* Allocate storage for CPU status register */
    OS_CPU_SR  cpu_sr = 0;
#endif	

    if (OSRunning == OS_TRUE) {                            /* Make sure multitasking is running        */
        OS_ENTER_CRITICAL();
        if (OSLockNesting > 0) {                           /* Do not decrement if already 0            */
            OSLockNesting--;                               /* Decrement lock nesting level             */
            if (OSLockNesting == 0) {                      /* See if scheduler is enabled and ...      */
                if (OSIntNesting == 0) {                   /* ... not in an ISR                        */
                    OS_EXIT_CRITICAL();
                    OS_Sched();                            /* See if a HPT is ready                    */
                } else {
                    OS_EXIT_CRITICAL();
                }
            } else {
                OS_EXIT_CRITICAL();
            }
        } else {
            OS_EXIT_CRITICAL();
        }
    }
}
#endif

/*$PAGE*/
/*
*********************************************************************************************************
*                                          START MULTITASKING
*
* Description: This function is used to start the multitasking process which lets uC/OS-II manages the
*              task that you have created.  Before you can call OSStart(), you MUST have called OSInit()
*              and you MUST have created at least one task.
*
* Arguments  : none
*
* Returns    : none
*
* Note       : OSStartHighRdy() MUST:
*                 a) Call OSTaskSwHook() then,
*                 b) Set OSRunning to OS_TRUE.
*                 c) Load the context of the task pointed to by OSTCBHighRdy.
*                 d_ Execute the task.
*********************************************************************************************************
*/

void  OSStart (void) reentrant
{
    if (OSRunning == OS_FALSE) {
        OS_SchedNew();                               /* Find highest priority's task priority number   */
        OSPrioCur     = OSPrioHighRdy;
        OSTCBHighRdy  = OSTCBPrioTbl[OSPrioHighRdy]; /* Point to highest priority task ready to run    */
        OSTCBCur      = OSTCBHighRdy;
        OSStartHighRdy();                            /* Execute target specific code to start task     */
    }
}

/*$PAGE*/
/*
*********************************************************************************************************
*                                        STATISTICS INITIALIZATION
*
* Description: This function is called by your application to establish CPU usage by first determining
*              how high a 32-bit counter would count to in 1 second if no other tasks were to execute
*              during that time.  CPU usage is then determined by a low priority task which keeps track
*              of this 32-bit counter every second but this time, with other tasks running.  CPU usage is
*              determined by:
*
*                                             OSIdleCtr
*                 CPU Usage (%) = 100 * (1 - ------------)
*                                            OSIdleCtrMax
*
* Arguments  : none
*
* Returns    : none
*********************************************************************************************************
*/

#if OS_TASK_STAT_EN > 0
void  OSStatInit (void)	reentrant
{
#if OS_CRITICAL_METHOD == 3                      /* Allocate storage for CPU status register           */
    OS_CPU_SR  cpu_sr = 0;
#endif	

    OSTimeDly(2);                                /* Synchronize with clock tick                        */
    OS_ENTER_CRITICAL();
    OSIdleCtr    = 0L;                           /* Clear idle counter                                 */
    OS_EXIT_CRITICAL();
    OSTimeDly(OS_TICKS_PER_SEC / 10);            /* Determine MAX. idle counter value for 1/10 second  */
    OS_ENTER_CRITICAL();
    OSIdleCtrMax = OSIdleCtr;                    /* Store maximum idle counter count in 1/10 second    */
    OSStatRdy    = OS_TRUE;
    OS_EXIT_CRITICAL();
}
#endif

/*$PAGE*/
/*
*********************************************************************************************************
*                                         PROCESS SYSTEM TICK
*
* Description: This function is used to signal to uC/OS-II the occurrence of a 'system tick' (also known
*              as a 'clock tick').  This function should be called by the ticker ISR but, can also be
*              called by a high priority task.
*
* Arguments  : none
*
* Returns    : none
*********************************************************************************************************
*/

void  OSTimeTick (void)	reentrant
{
    OS_TCB    *ptcb;
#if OS_TICK_STEP_EN > 0
    BOOLEAN    step;
#endif
#if OS_CRITICAL_METHOD == 3                                /* Allocate storage for CPU status register     */
#if OS_TIME_GET_SET_EN > 0
    OS_CPU_SR  cpu_sr = 0;
#endif
#endif 

#if OS_TIME_TICK_HOOK_EN
    OSTimeTickHook();                                      /* Call user definable hook                     */
#endif
#if OS_TIME_GET_SET_EN > 0
    OS_ENTER_CRITICAL();                                   /* Update the 32-bit tick counter               */
    OSTime++;
    OS_EXIT_CRITICAL();
#endif
    if (OSRunning == OS_TRUE) {
#if OS_TICK_STEP_EN > 0
        switch (OSTickStepState) {                         /* Determine whether we need to process a tick  */
            case OS_TICK_STEP_DIS:                         /* Yes, stepping is disabled                    */
                 step = OS_TRUE;
                 break;

            case OS_TICK_STEP_WAIT:                        /* No,  waiting for uC/OS-View to set ...       */
                 step = OS_FALSE;                          /*      .. OSTickStepState to OS_TICK_STEP_ONCE */
                 break;

            case OS_TICK_STEP_ONCE:                        /* Yes, process tick once and wait for next ... */
                 step            = OS_TRUE;                /*      ... step command from uC/OS-View        */
                 OSTickStepState = OS_TICK_STEP_WAIT;
                 break;

            default:                                       /* Invalid case, correct situation              */
                 step            = OS_TRUE;
                 OSTickStepState = OS_TICK_STEP_DIS;
                 break;
        }
        if (step == OS_FALSE) {                            /* Return if waiting for step command           */
            return;
        }
#endif
        OSSchedLock();
        ptcb = OSTCBList;                                  /* Point at first TCB in TCB list               */
        while (ptcb->OSTCBPrio != OS_TASK_IDLE_PRIO) {     /* Go through all TCBs in TCB list              */
            if (ptcb->OSTCBDly != 0) {                     /* No, Delayed or waiting for event with TO     */
                if (--ptcb->OSTCBDly == 0) {               /* Decrement nbr of ticks to end of delay       */
                                                           /* Check for timeout                            */
                    if ((ptcb->OSTCBStat & OS_STAT_PEND_ANY) != OS_STAT_RDY) {
                        ptcb->OSTCBStat   &= ~(INT8U)OS_STAT_PEND_ANY;         /* Yes, Clear status flag   */
                        ptcb->OSTCBPendTO  = OS_TRUE;                          /* Indicate PEND timeout    */
                    } else {
                        ptcb->OSTCBPendTO  = OS_FALSE;
                    }

                    if ((ptcb->OSTCBStat & OS_STAT_SUSPEND) == OS_STAT_RDY) {  /* Is task suspended?       */
                        OSRdyGrp               |= ptcb->OSTCBBitY;             /* No,  Make ready          */
                        OSRdyTbl[ptcb->OSTCBY] |= ptcb->OSTCBBitX;
                    }
                }
            }
            ptcb = ptcb->OSTCBNext;                        /* Point at next TCB in TCB list                */
        }
        OSSchedUnlock();
    }
}

/*$PAGE*/
/*
*********************************************************************************************************
*                                             GET VERSION
*
* Description: This function is used to return the version number of uC/OS-II.  The returned value
*              corresponds to uC/OS-II's version number multiplied by 100.  In other words, version 2.00
*              would be returned as 200.
*
* Arguments  : none
*
* Returns    : the version number of uC/OS-II multiplied by 100.
*********************************************************************************************************
*/

#if OS_VERSION_EN > 0
INT16U  OSVersion (void) reentrant
{
    return (OS_VERSION);
}
#endif

/*$PAGE*/
/*
*********************************************************************************************************
*                                            DUMMY FUNCTION
*