#include "avr/io.h"
#include "macros"
unsigned char disp[] = {0xC0,0xF9,0xA4,0xB0,0x99,0x92,0x82,0xF8,0x80,0x90,0xC0,0xC0,0xC0,0xC0,0xC0,0xC0};
unsigned char led_buf[] = {1, 2, 3, 4, 0};   /*顯示信息*/
/*------------------------------------------------------------------*-  Disp_Init()
  顯示初始化-*------------------------------------------------------------------*/
void Disp_Init(void) { /*初始化定時器*/
 OCR1A = 625;      /*計數周期為5mS，F=1M*/
 TIMSK |= (1 << OCIE1A);    /*比較中斷A允許*/
 SREG = 0x80;
 TCCR1A = 0x00;
 TCCR1B = 0x08;      /*定時器工作在CTC計數器模式*/
 TCCR1B |= 0x02;      /*設置定時器的分頻值為8分頻*/
 
 /*SPI接口初始化*/
 DDRB |= (1<<PB5) | (1<<PB7);  /* 設置MOSI 和SCK 為輸出，其他為輸入 */
 SPCR = (1<<SPE) | (1<<MSTR)
  | (1<<SPR1) | (1<<SPR0);  /* 使能SPI 主機模式，時鐘為fck/128 */
 
 /*中斷使能*/
 SEI();
}/*------------------------------------------------------------------*-
  
  Int_TCCR1A()
  LED數碼管動態顯示函數 定時器'T1',A組比較中斷產生5mS周期性中斷
 在中斷里刷新顯示
 
-*------------------------------------------------------------------*/
#pragma interrupt_handler Int_TCCR1A: 7
void Int_TCCR1A(void) { unsigned char temp;
 static unsigned char i; PORTB &= ~(1 << 4);     /*準備鎖存*/
 PORTB |= 0x0F;
 PORTB |= (1 << 4);     /*鎖存數據*/
 if (i == 3) {
  PORTB &= ~(1 << 2);
  }
 if (i == 2) {
  PORTB &= ~(1 << 1);
  }
 if (i == 1) {
  PORTB &= ~(1 << 0);
  }
 if (i == 0) {
  PORTB &= ~(1 << 3);
  }
 
 temp = led_buf[i] % 16;  /**/
 temp = disp[temp];   /**/
 SPDR = temp; if (i > 3) {
  i = 0;
  }
 else {
  i ++;
  }
}