#Profibus_DP
GSD_Revision        = 3
;
Vendor_Name         = "DANFOSS DRIVES A/S";
Model_Name          = "DMS300 12MB";
Revision            = "Rev. 1.10"
Ident_Number        = 0x0409
Protocol_Ident      = 0
Station_Type        = 0
FMS_supp            = 0
Hardware_Release    = "1"
Software_Release    = "1"
Bitmap_Device = "DMS300";
Slave_Family        = 1@Danfoss@DMS300;
Info_Text = "DMS300 PROFIBUS DPV0";
9.6_supp            = 1
19.2_supp           = 1
93.75_supp          = 1
187.5_supp          = 1
500_supp            = 1
1.5M_supp           = 1
3M_supp             = 1
6M_supp             = 1
12M_supp            = 1
;
MaxTsdr_9.6         = 60
MaxTsdr_19.2        = 60
MaxTsdr_93.75       = 60
MaxTsdr_187.5       = 60
MaxTsdr_500         = 100
MaxTsdr_1.5M        = 150
MaxTsdr_3M          = 250
MaxTsdr_6M          = 450
MaxTsdr_12M         = 800
;
Redundancy          = 0
Repeater_Ctrl_Sig   = 0
24V_Pins            = 1 
Implementation_Type = "LSPM2"
;
Freeze_Mode_supp    = 1
Sync_Mode_supp      = 1
Auto_Baud_supp      = 1
Set_Slave_Add_supp  = 0
Min_Slave_Intervall = 1
;
Modular_Station     = 0
Modul_Offset        = 0
;
Fail_Safe           = 0
Max_Diag_Data_Len   = 13
User_Prm_Data_Len   = 5
User_Prm_Data       = 0x00,0x00,0x00,0x00,0x00
;
Unit_Diag_Bit(13)   = "Actuator-Overload"
;
;
Module = "PB-DP DI 8x 24V DO 4x 24V/1A" 0x20,0x10
1
EndModule
;