#include <reg51.h>
#include <absacc.h>

#define   uchar  unsigned char
#define   uint   unsigned int
#define   ulong  unsigned long
/*****************************************************************************************************/
sbit cs_dram=P3^2;
/*****************************************************************************************************/
bit sensor_looperror_flag;
uchar xdata loop_set[32];
uchar xdata loop_error[32];
uchar xdata loop_now[32],loop_last[32];
uchar xdata flagh,flagl,flag,flagg;
uchar c381,c380,c301,c300;
uint  ttemp;
uchar go=0;
uchar xdata carcount[32],liul[32];
uchar xdata forsense[32],send_liul[32],send_occ[32];
uint  xdata lpp,hpp,actlpp,acthpp;     /*1-16線圈，17－32線圈的故障，高有效*/

uint   xdata carnumber,lastcarnumber;
ulong  data loopidd;
ulong  xdata loop_nowstep=0;
ulong  data loopid;
ulong  data now_loop;
unsigned char abcd=0;
/*****************************************************************************************************/
extern  char start_counter;
extern  uchar xdata timeid,last_timeid;
extern  bit  sensor_car_flag;
extern  uchar xdata step_num;                  //階段數
extern  uchar xdata step_counter;              //階段號
extern  uint  xdata baseaddr_now_phasesch;       //當前相位表基地址
extern  uint  xdata inuse_phase1[32];         //階段用到的相位
unsigned int xdata  loop_ratio[32];
unsigned char xdata loop_error_flag=0;          //當前階段包含了線圈檢測器，并且全部發生故障
extern void ask_sch();