//******************************************************************************
//  MSP430F20x2 Demo - ADC10, Sample A1, Signed, Set P1.0 if > 0.5*AVcc
//
//  Description: A single sample is made on A1 with SIGNED reference to AVcc.
//  Software sets ADC10SC to start sample and conversion - ADC10SC
//  automatically cleared at EOC. ADC10 internal oscillator times sample (16x)
//  and conversion. In Mainloop MSP430 waits in LPM0 to save power until ADC10
//  conversion complete, ADC10_ISR will force exit from any LPMx in Mainloop on
//  reti. If A1 > 0.5*AVcc, P1.0 set, else reset.
//
//                MSP430F20x2
//             -----------------
//         /|\|              XIN|-
//          | |                 |
//          --|RST          XOUT|-
//            |                 |
//        >---|A1/P.1           |
//
//   P.Thanigai
//  Texas Instruments Inc.
//  May 2007
//  Built with Code Composer Essentials Version: 2.0
//******************************************************************************
#include  "msp430x20x2.h"

void main(void)
{
  WDTCTL = WDTPW + WDTHOLD;                 // Stop WDT
  ADC10CTL1 = ADC10DF + INCH_1;             // Conversion code singed format, input A1
  ADC10CTL0 = ADC10SHT_2 + ADC10ON + ADC10IE; // ADC10ON, interrupt enabled
  ADC10AE0 |= 0x02;                         // P1.0 ADC option select
  P1DIR |= 0x01;                            // Set P1.0 to output direction

  for (;;)
  {
    ADC10CTL0 |= ENC + ADC10SC;             // Sampling and conversion start
    __bis_SR_register(CPUOFF + GIE);        // LPM0, ADC10_ISR will force exit
    if ((int)ADC10MEM  < 0)
      P1OUT &= ~0x01;                       // Clear P1.0 LED off
    else
      P1OUT |= 0x01;                        // Set P1.0 LED on
  }
}

// ADC10 interrupt service routine
__interrupt void ADC_ISR (void);
ADC10_ISR(ADC_ISR)
__interrupt void ADC_ISR (void)
{
  __bic_SR_register_on_exit(CPUOFF);        // Clear CPUOFF bit from 0(SR)
}